KG-17.pdf

KG-17

RFC 17 CLIN #27 Crib & Accessories Qty: 5 The device is a pediatric crib used for children in hospitals. The crib has side rails to allow unrestricted access. The scale system gives correct weights no matter the position of the child.

Include a 3-inch mattress, oxygen holder, a braking system, and hydraulic foot control mounted on both sides, hands-free and reverse trend.

The safe working load is 100lbs. The patient surface should be a minimum 29.5inch X 57inch.

RFC 17 CLIN #95 Warmer, w/ STD Bassinet, HT ADJ Qty: 4 Unit shall be a freestanding infant warmer that provides heat through microprocessors installed in the overhead compartment of the unit. Unit shall come with a control system that can be used to control all operations. The control system has an LED display of temperature. The heater can be controlled manually and temperatures can be increased by 5 degrees increment. The device can be left to heat alone when kept in preheat mode.

Normally after every twelve minutes, a “check Patient” alarm will go off. The skin temperature mode can be set so that the temperature of the baby is monitored.

RFC 17 CLIN #96 Warmer, Infant, w/Bassinet and in-bed scale Qty: 3 Unit shall be a free standing warmer with an attached bassinet and integral scale. It can be used at the bedside in the LDRP or in a nursery. The bassinet can be easily detached.

It shall come with an assembly for heating that includes, light for observation, an alarm light that is visual and a radiant heater.

The overall dimensions of the device are approximately 73inch for height, 40.5inch for depth, width of 24.5inch. The mattress dimensions are approximately 18.2inch for width and 25.2inch for length. The casters for the warmer are approximately 2 inches and for the bassinet 5 inch.