2010SPECS_TIRE CHAIN AND CUTTING EDGE.doc

DOC document 40 KB Posted

Attached to
MaineDOT Tire Chain Commodity Contract
Solicitation number
RFQ - 17D - 10092100000000000329
Issued by
Maine

About this file

This is a specifications document and bid terms and conditions for a tire chain commodity contract issued by the Maine Department of Transportation, with participation available to other state agencies. The contract covers the Maine Department of Transportation's normal tire chain requirements for a one-year period from October 15, 2010 to October 14, 2011, with the State of Maine reserving the right to renew the contract with contractor consent. Tire chains must meet NACM specification 92805 and ASTM E18 hardness standards, with reference to additional standards including NACM 5179(TC) and SAE specifications. The low bidder may be required to submit products for testing through the University of Southern Maine Materials Testing Unit at vendor expense, charged at $140.00 per hour with a one-hour minimum, requiring a deposit of one-half of estimated test costs prior to testing. Warranty specifications must be included in bids and may be considered during evaluation and award.

Pricing must be firm for the contract duration and include all transportation and delivery charges prepaid by the contractor on an F.O.B. destination basis, with prices not subject to increase during the agreement period. Orders of $5,000 or less will be emailed directly to vendors as PDF files, while larger orders will be routed through the Division of Purchases for approval and encumbrance. Invoices must be issued within 30 days of delivery, reference the Master Agreement Number and Customer Number, and be submitted separately for each order number. The State of Maine is exempt from federal excise taxes and state sales taxes, and vendors must accept the State of Maine Procurement Card as payment without surcharges. Contractors must agree to extend contract pricing to political subdivisions and school districts in Maine. The Division of Purchases reserves the right to cancel the contract with thirty days' written notice or immediately if the contractor fails to conform to contract terms and conditions.

View the file

Other files

File Type Posted
2010 Tire Chain Bid.xls XLS spreadsheet
Solicitation_terms.doc DOC document
MaineDOT Shipping Address.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SPECIFICATIONS FOR TIRE CHAINS

BID TERMS AND CONDITIONS

1. SCOPE: This request is for a one year contract to cover the normal requirements of the Maine Department of Transportation for Tire Chains. Other State Agencies may also participate in the contract.

It is the intent of these specifications to set forth the criteria to be met in this RFQ. Vendor must meet requirements specified below and on the attached spread sheets.

2. CONTRACT PERIOD: October 15, 2010 to October 14, 2011. The State of Maine reserves the right, with the consent of the contractor, to renew contract.

3. PRODUCT QUALITY CERTIFICATION and WARRANTY:

Tire Chains – Product must meet NACM (National Association of Chain Manufacturers) specification 92805; steel must meet ASTM E18 (hardness)

The reference standards include but are not limited to the following: type, size, dimension, material, workmanship, finish, detail requirements, methods of sampling, inspection and test. Other reference standards may include NACM 5179(TC) and SAE J683-86 or J1232-78 or any revisions thereto.

Tire Chain Testing – Low bidder may be asked to have the tire chain they are bidding tested, using the standards listed above, through the University of Southern Maine, Materials Testing Unit (at the cost of the vendor). The testing rate is $140.00 per hour with a 1 hour minimum. Actual time involved will be charged. A deposit of one half of estimated test cost required prior to test at the expense of the bidder. The University of Southern Maine Materials Testing Unit, address is as follows: (207) 780-5313, University of Southern Maine, Attn: Dr. William H. Moore, 37 College Ave., Gorham, ME 04038.

Once an award has been made, any failures will be tested and any inferior product tested will be charged to contracted vendor.

4. NOTE: Warranty (see attached spread sheet for minimum warranty) must be specified in bid and may be used as a portion of the evaluation and award process.

5. BID PRICES: Price shall include transportation, pick up and delivery charges fully prepaid by the Contractor F.O.B. destination. The requirements specified are approximate in part number and quantity; other items may be required and will be subject to the same cost structure and discount as the items awarded. Prices bid will not be subject to increase during the period covered by this agreement.

PRICES: Prices shall remain firm for the duration of the contract. Prices to include all transportation and delivery charges fully prepaid by the contractor F.O.B. Destination.

ORDERING PROCEDURE: Delivery Orders (DO) will be created in AdvantageME for all orders against Master Agreements (MA), unless the State of Maine Procurement Card is used for payment. Orders in the amount of $5000.00 or less will be e-mailed by the using agency to the Vendor as a .PDF file. Delivery Orders in amounts greater than $5000.00 will workflow to the Division of Purchases’ Buyers for approval and encumbrance. The Division of Purchases will e-mail the .PDF order to the Vendor.

INVOICES: Separate invoices are required for each order number. All invoices must reference Master Agreement Number and Customer Number, failure to do so could cause lengthy delays of payment of invoices. All invoices should be issued within 30 days of delivery and paid in accordance with the commodity terms and conditions attached to the contract.

DELIVERY: Contractor will be responsible for delivery of materials in first-class condition at the point of delivery, and in accordance to good commercial practice. All deliveries will be delivered to the stated destination in a timely manner.

MINIMUM ORDERS: The State of Maine will make every attempt to use consideration in placing orders that meet a reasonable order quantity in either units or dollars for delivery, although there may be times when a small dollar amount or item may be needed.

CERTIFICATE OF COMPLIANCE: A certificate of compliance with manufacturing site and date may be required upon request. If there are manufacturer’s defects, a metallurgy report may be required, along with the Rockwell hardness test data.

REPORT OF PURCHASES: Contractor may be required to furnish the Director of Purchases with a detailed summary of total purchases made under this contract. This total may be requested yearly or at any time during the contract period.

PROCUREMENT CARD: State policy requires vendors to accept the State of Maine Procurement Card as a form of payment, with very rare exceptions. Your company will be required to accept these cards. The pricing offered to the State of Maine shall be the final cost to the State of Maine regardless of payment method. No surcharge or other compensation will be allowed. The State of Maine reserves the right to reject your bid if you are unwilling to accept this condition.

TAXES: The State of Maine is exempt from the payment of federal excise taxes and state sales taxes. Exemption certificates may be furnished upon request from the Division of Purchases.

EXTENSION OF CONTRACT: The Director of Purchases may, with the consent of the Contractor extend the contract period beyond the indicated expiration date.

CANCELLATION OF CONTRACT: The Division of Purchases reserves the right to cancel a contract upon a thirty day written notice, or cancel immediately if the contractor does not conform to the terms and conditions of this contract.

If you have a question regarding this RFQ, you must submit your questions thru the Question and Answer link on the Solicitation Details View page. Your answer will appear there as well. It is the vendor’s responsibility to log in to view all questions and answers posted there. Questions and Answers obtained any other way will not be valid for this RFQ.

OPPORTUNITIES FOR POLITICAL SUBDIVISIONS AND SCHOOL DISTRICTS:

The Division of Purchases is committed to providing purchasing opportunities for political subdivisions and school districts in Maine by allowing them access, through our vendors, to our contract pricing. The successful bidder’s willingness to extend contract pricing to these entities will be considered in making this award. Upon award, this document must be signed, dated, and returned to buyer.

Will you accept orders from political subdivisions and school districts in Maine at the prices quoted?

Yes, unconditionally.

Yes, with conditions. Specify:

No.

Company Representative Signature: ______________________________________

Printed Name: __________________________________

Date: ___________________________________________

File details come from the government source that posted it. Updated .