Statement_of_Work_SOW.pdf

Statement of Work

United States Border Patrol Strategic Planning and Analysis Directorate

Enforcement Systems Division Geospatial Information Systems Branch

Vortex Compatible Unattended Ground Sensors and Parts

GIS Log Number: GIS18-180403002

PR Number: 20105933 APFS Number: F201841832

July 21, 2018

1 BACKGROUND

Customs and Border Protection (CBP) is seeking quotations in an effort to purchase various parts and accessories required for existing Unattended Ground Sensors (UGS) to perform detection activities, on metal fencing and on the ground, for the United States Border Patrol (USBP). This requirement is to maintain and update a critical portion of the existing UGS program and refresh outdated technology. USBP intends to award a Firm Fixed Price Type Contract to fulfill these requirements. This procurement intends to be maintenance and expansion of the existing UGS program managed by the GIS Branch (USBP-GIS). This document and procurement is Law Enforcement Sensitive (LES). Detailed specifications for the equipment and accessories are in section 5.

2 SCOPE

a. This document describes the products and execution requirements relating to the purchase of sensors and equipment in support of the current USBP UGS system.

b. The work included under this specification consists of furnishing equipment at a Firm Fixed Price (FFP) that is identical or equal to equipment outlined in section 5.

c. The contractor must address all parts, sections, and items in this Statement of Work (SOW). The contractor must clearly identify any exception taken to any Part, Section, or Item of the SOW. If the Brand Name product is not being offered, the contractor must provide documentary proof, i.e. specifications, of the offered products, indicating the compatibility, suitability and durability of the offered products, and outlining how the salient characteristics of the Brand Name are being met.

d. This requirement is Law Enforcement Sensitive.

3 APPLICABLE DOCUMENTS

The Federal Acquisitions Regulations (FAR): https://www.acquisition.gov/browsefar

Homeland Security Acquisition Regulation (HSAR):

https://www.dhs.gov/xlibrary/assets/opnbiz/cpo-acquisition-regulation-0606.pdf

Code of Federal Regulations (CFR):

https://www.gpo.gov/fdsys/browse/collectionCfr.action?selectedYearFrom=2017

4 SPECIFIC TASKS

The contractor shall complete the following tasks as required to comply with this SOW.

4.1 TESTING

Prior to delivery, the contractor shall certify the compatibility of all equipment with all relevant CBP systems, including the Intelligent Computer Assisted Detection https://www.acquisition.gov/browsefar https://www.dhs.gov/xlibrary/assets/opnbiz/cpo-acquisition-regulation-0606.pdf https://www.gpo.gov/fdsys/browse/collectionCfr.action?selectedYearFrom=2017

(ICAD) application, the National Intrusion Sensor Infrastructure (NiSI) and applicable cellular vendor protocols and specifications used by CBP.

4.2 DELIVERY

The contractor shall be responsible for issuing specification documents if requested by CBP. (See section 5.4)

5 DELIVERABLES AND DELIVERY SCHEDULE

5.1 Deliverables / Milestones

Contractor shall have all equipment type available for complete delivery during each period of performance. Actual delivery times for equipment types shall be coordinated after award.

Initial deliveries shall begin within 30 days after receipt of award (ARO).

5.2 Equipment List

The contractor shall deliver brand name or equal equipment as outlined below and described in section 5.2 Equipment Description. Equipment operations and users manuals shall accompany each item when delivered:

5.2.1 Base Year

Line Equipment Type Quantity

1 Micro-Tremor Fence Sensor 100

2 Wireless Bridge Kit 50

3 Heavy Duty Steel Security Housing for Fence Sensor 200

4 Standard Duty Steel Security Housing for Fence Sensor 200

5 Fence Sensor to GS Sensor Cable, 2' 250

6 Fence Sensor to GS Sensor Cable, 10' 250

7 Fence Sensor to GS Sensor Cable, 20' 75

8 Wireless Bridge to GS Sensor Cable, 2' 30

9 Micro-Tremor Fence Sensor to GS Sensor Cable, 16" 30

10 PIR Cable for GS Sensor, 25' 150

11 Seismic Only Sensor 400

12 PIR Only Sensor 250

13 Multi-port, Seismic, Magnetic Ground Sensor 1500

14 Fixed Repeater, 5W 70

15 Fixed Repeater, 50W 70

16 Tactical Repeater 70

17 Rack Mount Integrated Receiver/Decoder/w/power supply 93

18 Handheld Sensor Programmer 80

19 Power Supply for Handheld Sensor Programmer/Receiver 30

20 Vortex Program Cable 30

21 Mobile Monitor 10

22 Short Range PIR 230

23 Long Range PIR 110

24 Seismic Sensor Probe with geophone, no pigtail 765

25 Seismic Sensor Probe with geophone, with pigtail 600

26 Directional Extension Cable, 20' 100

27 GS Sensor Programming Kit for PC 70

28 On/Off Switch for GS Sensor 60

29 Solar Kit for Tactical Repeater 120

30 Contact Closure Cable, 20' 50

31 GS Sensor Junction Box 230

32 Vortex Interface Cable 30

33 Magnetic Sensor Probe 250

34 Uninterruptable Power Supply for Base Station Receiver 60

35 Battery Charger for Handheld Sensor Programmer 10

36 Ground Plane Antenna w/TNC Connector and VHF Whip 3500

37 Extension Antenna Cable, TNC Male TO TNC Female 6' 2500

38 BNC Whip Antenna 2000

39 O-Ring for GS Sensors 500

40 O-Ring for LCT Enclosure 1000

41 Desiccant for GS Sensor 2000

42 Desiccant for LCT Enclosure 2000

43 Battery Harness Kit for LCT 400

44 Magnetic Mount Antenna with BCN Connector 50

45 Ground Plane Antenna with TNC male connector 100

46 BNC to BNC Connector 500

47 SMA to TNC Bulkhead Connector 350

48 GS External Battery Pack 30

Total Items 21643

5.2.2 Option Year 1

Line Equipment Type Qty.

1 Micro-Tremor Fence Sensor 100

2 Wireless Bridge Kit 100

3 Heavy Duty Steel Security Housing for Fence Sensor 75

4 Standard Duty Steel Security Housing for Fence Sensor 25

5 Fence Sensor to GS Sensor Cable, 2' 100

6 Fence Sensor to GS Sensor Cable, 10' 40

7 Fence Sensor to GS Sensor Cable, 20' 15

8 Wireless Bridge to GS Sensor Cable, 2' 100

9 Micro-Tremor Fence Sensor to GS Sensor Cable, 16" 15

10 PIR Cable for GS Sensor, 25' 150

11 Seismic Only Sensor 75

12 PIR Only Sensor 75

13 Multi-port, Seismic, Magnetic Ground Sensor 50

14 Fixed Repeater, 5W 20

15 Fixed Repeater, 50W 20

16 Tactical Repeater 20

17 Rack Mount Base Station 30

18 Handheld Sensor Programmer 40

19 Mobile Monitor 10

20 Short Range PIR 150

21 Long Range PIR 100

22 Seismic Sensor Probe with geophone, no pigtail 500

23 Seismic Sensor Probe with geophone, with pigtail 600

24 Directional Extension Cable, 20' 100

25 GS Sensor Programming Kit for PC 60

26 On/Off Switch for GS Sensor 24

27 Solar Kit for Tactical Repeater 60

28 Contact Closure Cable, 20' 50

29 GS Sensor Junction Box 100

30 Magnetic Sensor Probe 250

31 Uninterruptable Power Supply for Base Station Receiver 30

32 Battery Charger for Handheld Sensor Programmer 10

33 Ground Plane Antenna w/TNC Connector and VHF Whip 1500

34 Extension Antenna Cable, TNC Male TO TNC Female 6' 1500

35 BNC Whip Antenna 1500

36 O-Ring for GS Sensors 400

37 O-Ring for LCT Enclosure 600

38 Desiccant for GS Sensor 1000

39 Desiccant for LCT Enclosure 1000

40 Battery Harness Kit for LCT 400

41 Magnetic Mount Antenna with BCN Connector 50

42 Ground Plane Antenna with TNC male connector 100

43 BNC to BNC feed thru connector (LCT-75) (GS 92-3140) 250

44 SMA to TNC Bulkhead Connector 250

Total 11644

5.2.3 Option Year 2

1 Micro-Tremor Fence Sensor 100

2 Wireless Bridge Kit 50

3 Heavy Duty Steel Security Housing for Fence Sensor 125

4 Standard Duty Steel Security Housing for Fence Sensor 125

5 Fence Sensor to GS Sensor Cable, 2' 125

6 Fence Sensor to GS Sensor Cable, 10' 125

7 Fence Sensor to GS Sensor Cable, 20' 25

8 Wireless Bridge to GS Sensor Cable, 2' 125

9 Micro-Tremor Fence Sensor to GS Sensor Cable, 16" 125

10 PIR Cable for GS Sensor, 25' 150

11 Seismic Only Sensor 150

12 PIR Only Sensor 150

13 Multi-port, Seismic, Magnetic Ground Sensor 1500

14 Fixed Repeater, 5W 70

15 Fixed Repeater, 50W 70

16 Tactical Repeater 70

17 Rack Mount Base Station 30

18 Handheld Sensor Programmer 50

19 Mobile Monitor 10

20 Short Range PIR 150

21 Long Range PIR 150

22 Seismic Sensor Probe with geophone, no pigtail 200

23 Seismic Sensor Probe with geophone, with pigtail 200

24 Directional Extension Cable, 20' 100

25 GS Sensor Programming Kit for PC 60

26 On/Off Switch for GS Sensor 60

27 Solar Kit for Tactical Repeater 100

28 Contact Closure Cable, 20' 100

29 GS Sensor Junction Box 200

30 Magnetic Sensor Probe 200

31 Uninterruptable Power Supply for Base Station Receiver 60

32 Battery Charger for Handheld Sensor Programmer 10

33 Ground Plane Antenna w/TNC Connector and VHF Whip 3500

34 Extension Antenna Cable, TNC Male TO TNC Female 6' 1250

35 BNC Whip Antenna 1500

36 O-Ring for GS Sensors 500

37 O-Ring for LCT Enclosure 200

38 Desiccant for GS Sensor 2000

39 Desiccant for LCT Enclosure 500

40 Battery Harness Kit for LCT 150

41 Magnetic Mount Antenna with BCN Connector 50

42 Ground Plane Antenna with TNC male connector 10

43 BNC to BNC Connector 250

Total 14925

5.2.4 Option Year 3

1 Micro-Tremor Fence Sensor 100

2 Wireless Bridge Kit 100

3 Heavy Duty Steel Security Housing for Fence Sensor 50

4 Standard Duty Steel Security Housing for Fence Sensor 50

5 Fence Sensor to GS Sensor Cable, 2' 100

6 Fence Sensor to GS Sensor Cable, 10' 50

7 Fence Sensor to GS Sensor Cable, 20' 25

8 Wireless Bridge to GS Sensor Cable, 2' 100

9 Micro-Tremor Fence Sensor to GS Sensor Cable, 16" 25

10 PIR Cable for GS Sensor, 25' 150

11 Seismic Only Sensor 75

12 PIR Only Sensor 50

13 Multi-port, Seismic, Magnetic Ground Sensor 20

14 Fixed Repeater, 5W 20

15 Fixed Repeater, 50W 20

16 Tactical Repeater 20

17 Rack Mount Base Station 20

18 Handheld Sensor Programmer 20

19 Mobile Monitor 10

20 Short Range PIR 150

21 Long Range PIR 100

22 Seismic Sensor Probe with geophone, no pigtail 0

23 Seismic Sensor Probe with geophone, with pigtail 0

24 Directional Extension Cable, 20' 50

25 GS Sensor Programming Kit for PC 20

26 On/Off Switch for GS Sensor 20

27 Solar Kit for Tactical Repeater 50

28 Contact Closure Cable, 20' 50

29 GS Sensor Junction Box 20

30 Magnetic Sensor Probe 50

31 Uninterruptable Power Supply for Base Station Receiver 30

32 Battery Charger for Handheld Sensor Programmer 10

33 Ground Plane Antenna w/TNC Connector and VHF Whip 2500

34 Extension Antenna Cable, TNC Male TO TNC Female 6' 250

35 BNC Whip Antenna 1500

36 O-Ring for GS Sensors 400

37 O-Ring for LCT Enclosure 100

38 Desiccant for GS Sensor 2000

39 Desiccant for LCT Enclosure 250

40 Battery Harness Kit for LCT 50

41 Magnetic Mount Antenna with BCN Connector 20

42 Ground Plane Antenna with TNC male connector with enclosed spike (6ft cable) (92-3007)

43 BNC to BNC Connector 250

Total 9135

5.2.5 Alternate Equipment

If the contractor proposes alternate equipment, the Government must approve all proposals. All proposals shall comply with the specifications set by USBP-GIS needs and requirements. In addition, the vendor bears the burden of satisfactorily demonstrating equivalence to the technical and operational specifications outlined in the SOW.

5.3 Equipment Specifications

Vortex Compatible Unattended Ground Sensor Parts.

5.3.1 General Specifications:

5.3.1.1 Communications:

All equipment must have the ability to communicate by Radio Frequency (RF) with existing Monitron and Vortex sensor infrastructure.

5.3.1.2 Compatibility:

• All equipment must be a direct replacement for the original equipment manufacturer (OEM) part and meet or exceed the OEM part specifications.

• All equipment must be compatible with the CBP Intelligent Computer Assisted Detection (ICAD) system and provide full functionality using at least one of the CBP ICAD standard alarm message formats.

5.3.1.3 Origin:

All Equipment must be made in the United States of America or in a Trade Agreements Act (TAA) designated country.

5.3.1.4 Warranty:

All delivered equipment shall include a minimum 12-month, commercial Warranty on all system hardware, software, and labor, effective from Government acceptance of the equipment. Under the Warranty, the Contractor shall repair / replace any equipment defects and provide all necessary labor, technical support, materials, shipping/handling, and travel to do so at no additional cost to the Government.

5.3.2 System Specifications

5.3.2.1 Micro-Tremor Fence Sensor:

• Must be 100% compatible with Vortex GS-10 and Monitron LCT- FAT sensors.

• Tamper Alerting

• Noise filtering

• Attach directly to metal fencing or structures

• Detect vibrations and sounds associated with subjects cutting, climbing or dismantling fencing or structures

• Operate voltage: 2.5-3,7 VDC

• Quiescent Current: 20uA or less

• Output: 100mA maximum

• Power Supply: Commercially off the shelf AA (4x) 1.5VDC Lithium batteries

• Battery Life: Minimum of 1 year

• Case construction: IP66, Aluminum or steel, Black Anodize

• Operating Temp: -40° to 155°F or better

• Size: 5.0” x 3.0” x 3.0” or smaller

• Weight: 1.0 lb. or less including batteries

• External Connections: 14 Pin External Sensor/ Programming Port

• User Interface: Available through external device using 14 Pin

Programming Port

5.3.2.2 Wireless Bridge Kit:

• Must be 100% Compatible with related system hardware, Vortex GS- MTS and any other Micro Tremor sensors in this delivery.

• Transmitter and receiver pair.

• Wireless range: at least 500 feet with line of sight

• Up to 4 transmitters can be added to a single receiver.

• Wireless connection between GS-MTS and the GS-10, GS-20 or LCT-

FAT sensor

5.3.2.3 Heavy Duty Steel Security Housing for Fence Sensor:

• Must be 100% compatible with current sensor infrastructure and certified by the manufacturer to function with and hold Micro Tremor Sensor (Probe) and Vortex GS-10 / GS-20 sensors from existing inventory.

• Able to be bolted or welded onto rigid fencing, walls or structures.

• Size: 9” x 12” x 5” or smaller

• Super Duty Version: 1/4” thick steel construction, paintable

5.3.2.4 Standard Duty Steel Security Housing for Fence Sensor:

• Same as Heavy Duty Steel Security Housing for Fence Sensor, except 3/16” thick steel construction, paintable.

5.3.2.5 Fence Sensor to GS Sensor Cable, 2':

• Must be 100% Compatible with related system hardware

5.3.2.6 Fence Sensor to GS Sensor Cable, 10’:

• Must be 100% Compatible with related system hardware

5.3.2.7 Fence Sensor to GS Sensor Cable, 20’:

• Must be 100% Compatible with related system hardware

5.3.2.8 Wireless Bridge to GS Sensor Cable, 2':

• Must be 100% Compatible with related system hardware

• GS-WB200R to GS Sensor

5.3.2.9 Micro-Tremor Fence Sensor to GS Sensor Cable, 16”:

• Must be 100% Compatible with related system hardware

• GS-MTS to GS Sensor

5.3.2.10 PIR Cable for GS Sensor, 25':

• Must be 100% Compatible with supplied PIR and IR units.

• OEM Part Number: 75-0034.

5.3.2.11 Seismic Only Sensor:

• Must be compatible with current sensor communication infrastructure (Monitron and Vortex).

• Programmable RF output Power

• Built in magnetometer and seismic sensor

• Configurable sensitivity for each sensor

• Unit to unit configuration (Cloning)

• Programmable sensor start and stop times

• Tamper switch

• Must operate in the 161-174 MHz range

• Operating Bandwidth: Narrowband (12.5 KHz)

• Power Output: Nominal 5W

• Input Voltage: 8.0 to 20 VDC

• Power Supply: commercially available 1.5VDC Lithium batteries

• Battery Life: One year or more at 130+ transmissions per day

• Operating Temp: -40°to 155° F or better

• Case Construction: Fiberglass Reinforced Polyester Plastic with O-ring Silicon Seal

• User Interface: Programmable with external programming unit or by computer

• RF Connector: TNC standard

• External Connections: Antenna and external sensor/programming port

• Weight: less than 2 lbs. with batteries

• Must be compatible with the Office of Border Patrol Intelligent

Computer Assisted Detection system

5.3.2.12 PIR Only Sensor:

• Must be compatible with current sensor communication infrastructure (Monitron and Vortex).

• Programmable RF output Power

• Built in magnetometer and seismic sensor

• Configurable sensitivity for each sensor

• Unit to unit configuration (Cloning)

• Programmable sensor start and stop times

• Tamper switch

• Must operate in the 161-174 MHz range

• Operating Bandwidth: Narrowband (12.5 KHz)

• Power Output: Nominal 5W

• Input Voltage: 8.0 to 20 VDC

• Power Supply: commercially available 1.5VDC Lithium batteries

• Battery Life: One year or more at 130+ transmissions per day

• Operating Temp: -40°to 155° F or better

• Case Construction: Fiberglass Reinforced Polyester Plastic with O-ring Silicon Seal

• User Interface: Programmable with external programming unit or by computer

• RF Connector: TNC standard

• External Connections: Antenna and external sensor/programming port

• Weight: less than 2 lbs. with batteries

• Must be compatible with the Office of Border Patrol Intelligent

Computer Assisted Detection system

5.3.2.13 Multi-port, Seismic, Magnetic Ground Sensor:

• Must be 100% compatibility with related system hardware, specifically the Vortex GS-10 sensor.

• Programmable RF output Power

• Built in magnetometer and seismic sensor

• Configurable external contact closure sensor types

• Configurable sensitivity for each sensor

• Unit to unit configuration (Cloning)

• Programmable sensor start and stop times

• Tamper switch

• Must operate in the 161-174 MHz range

• Operating Bandwidth: Narrowband (12.5 KHz)

• Power Output: Nominal 5W

• Input Voltage: 8.0 to 20 VDC

• Power Supply: commercially available 1.5VDC Lithium batteries

• Battery Life: One year or more at 130+ transmissions per day

• Operating Temp: -40°to 155° F or better

• Case Construction: Fiberglass Reinforced Polyester Plastic with O-ring Silicon Seal

• User Interface: Programmable with external programming unit or by computer

• RF Connector: TNC standard

• External Connections: Antenna and external sensor/programming port

• Weight: less than 2 lbs. with batteries

• Must be compatible with the Office of Border Patrol Intelligent

Computer Assisted Detection system

• Must be compatible with current sensor communication infrastructure

(Monitron and Vortex).

5.3.2.14 Fixed Repeater, 5W:

• Must be 100% compatibility with related system hardware including the Vortex GS-10, GS-20, and the full Monitron LCT sensor line.

• Designed for above ground installation.

• Power Output: Nominal 5W

• 5 watt version must include all the capabilities and functions of the

Vortex GS-40

• Number of Channels: 8

• Operating Power: 12 VDC

• Operating Temp: -4° to 120° F or better

• Case Construction: Powder Coated Steel

• Integrated screen and keypad

• RF Input/output Connector: 2+ BNC Standard connection

5.3.2.15 Fixed Repeater, 50W:

• Must be 100% compatibility with related system hardware including the Vortex GS-10, GS-20, and the full Monitron LCT sensor line.

• Designed for above ground installation.

• Power Output: Enhanced Version 50W

• 50 watt version must include all the capabilities and functions of the

Vortex GS-50

• Number of Channels: 8

• Operating Power: 12 VDC

• Operating Temp: -4° to 120° F or better

• Case Construction: Powder Coated Steel

• Integrated screen and keypad

• RF Input/output Connector: 2+ BNC Standard connection

5.3.2.16 Tactical Repeater:

• Must be 100% compatibility with related system hardware including the Vortex GS-10, GS-20, and the full Monitron LCT sensor line.

• Must include all the capabilities and functions of the Vortex GS-60.

• Designed for in ground or above ground installation.

• Number of Channels: 8

• Operating Power: 12 VDC

• Power Supply: Commercially Off-the-Shelf dual 6VDC or single

12VDC batteries

• Operating Temp: -20° to +60° Centigrade or better

• Power Output: Nominal 5W

• Case Construction: Polypropylene with O-ring seal

• User Interface: Programmable with integrated display and keypad

• RF Input/Output Connector: TNC standard

• External Connections: minimum 2, (1) Antenna and (1) External Power

• Operating Bandwidth: Narrowband (12.5 KHz)

• Frequency Range: 161-174 MHz minimum

5.3.2.17 Rack Mount Integrated Receiver/Decoder with Power

Supply:

• Must be100% compatibility with related system hardware

• Must include all the capabilities and functions of the Vortex GS-72

• Power Supply: 110/240VAC external power supply

• Operating Temp: -4° to 120° F or better

• Case Construction: 19” Rack mount, metal

• Integrated screen and keypad

• Connectors: minimum 1 RJ45 Cat5 network, minimum 1 standard

BNC, minimum 1 RS-485 Port with RS-232 adapter.

• Must be 100% compatible with OEM part number 75-0045

5.3.2.18 Handheld Sensor Programmer:

• Must be 100% compatibility with related system hardware

• Must provide the same capability and functionality of the Vortex GS-

• Must be able to program our existing Vortex GS-10 and/or GS-20

UGS as well as the sensors in this purchase.

• Operating Power: 12 VDC

• Case Construction: Aluminum, Powder Coat

• Illuminated 4 Line Display

• 16 key keypad

• Non-Volatile Memory for storage of at least 250 alarms

• External Connections: BNC standard, RS485, Circular 12 Pin

• Operating Temp: -4° to 120°F or better

• Functions as a Receiver

• FCC Rule Parts: 22, 74, 90

• IC Rule Parts: RSS-119

• Frequency Range: G-band: 138 to 162 MHz; O-band: 138 to 174 MHz

• Number of Channels: 8 independent TX/RX frequencies

• Weight: Under 3 lbs.

5.3.2.19 Power Supply for Handheld Sensor Programmer/Receiver:

• 100% compatibility with Handheld Sensor Programmer

• Must be 100% compatible with OEM part number 75-5828

5.3.2.20 Vortex Program Cable:

• 100% compatibility with GS81 to GS10

• Must be 100% compatible with OEM part number 75-5801

5.3.2.21 Mobile Monitor:

• Must be 100% compatibility with related system hardware

• Must provide the same capability and functionality of the Vortex GS-

• Must be able to monitor our existing Vortex GS-10 and/or GS-20 UGS as well as the sensors in this purchase.

• Includes vehicle cigarette lighter adapter

• Case Construction: Aluminum, Powder Coat

• In vehicle mountable

• Illuminated Display with key keypad

• Non-Volatile Memory for storage of alarms

• Functions as a Receiver

• Frequency Range: G-band: 138 to 162 MHz; O-band: 138 to 174 MHz

• Number of Channels: 8 independent TX/RX frequencies

• Weight: Under 4 lbs.

5.3.2.22 Short Range PIR:

• Must be 100% compatible with current sensor infrastructure and certified by the manufacturer to function with the current sensors (Monitron and Vortex)

• OEM Part Number: 75-0020

• Length: 3.5” (89mm)

• Diameter: 1.25” (32mm)

• Weight: 2-oz. (57g)

• Operating Temp.: -40°C to +70°C

Distance (Ft.) X (Ft.) Y (Ft.)

25 1.5 2.5 50 3 5

100 6 10

Field of View

5.3.2.23 Long Range PIR:

• Must be 100% compatible with current sensor infrastructure and certified by the manufacturer to function with the current sensors (Monitron and Vortex)

• OEM Part Number: 75-0011

• Length: 13.0” (330mm)

• Diameter: 3.5” (89mm)

• Weight: 47.6 oz. (1.35kg)

• Operating Temp.: -40°C to +70°C

Distance (Ft.) X (Ft.) Y (Ft.)

82 1.64 1.97

164 3.28 3.93 328 6.56 7.87 492 9.84 11.81

Field of View

5.3.2.24 Seismic Sensor Probe with geophone, no pigtail:

• Must be 100% Compatible with Monitron SPS-20

• OEM Part Number: 75-0018

• Includes 20 foot cable

5.3.2.25 Seismic Sensor Probe with geophone, with pigtail:

• Must be 100% Compatible with Monitron SPS-21

• OEM Part Number: 75-0019

• Includes 20 foot cable

• Pigtail connector to allow daisy chaining

5.3.2.26 Directional Extension Cable, 20':

• Must be 100% Compatible with Monitron LCT sensors

• OEM Part Number: 75-0026

• Includes 20 foot cable

5.3.2.27 GS Sensor Programming Kit for PC:

• Must provide connectors and software required to program the Vortex Sensor product line on a laptop or desktop computer with available USB port.

5.3.2.28 On/Off Switch for GS Sensor:

• Must be 100% compatibility with related system hardware.

• Specifically designed to function with the Vortex GS-10 and GS-20

5.3.2.29 Solar Kit for Tactical Repeater:

• Must be 100% compatibility with related system hardware

• Specifically designed to function with the Vortex GS-60

5.3.2.30 Contact Closure Cable, 20':

• Must be 100% Compatible with Monitron LCT sensors

• Includes 20 foot cable year

5.3.2.31 GS Sensor Junction Box:

• Must be 100% Compatible with OEM Part Number 75-0073

• Connects to Vortex GS-10 and GS-20 via sensor accessory port allowing multiple external devices to be connected to the sensor

5.3.2.32 Vortex Interface Cable:

• 100% Compatibility for use with GS Sensor Junction Box and

GS10

• Must be 100% compatible with OEM part number 75-5755

5.3.2.33 Magnetic Sensor Probe:

• Must be 100% Compatible with Vortex MS-10

• OEM Part Number: 75-0004

• Dual Axis

5.3.2.34 Uninterruptable Power Supply for Base Station Receiver:

• Must be 100% compatibility with related system hardware

• Specifically approved or rated by Vortex and Monitron to function with the Vortex GS-70, GS-71 or other Base Station Monitors offered for this solicitation

5.3.2.35 Battery Charger for Handheld Sensor Programmer:

• Must be 100% compatibility with related system hardware

• Specifically designed to function with the Vortex GS-80 and GS-81

5.3.2.36 Ground Plane Antenna w/TNC Connector and VHF Whip:

• Must be 100% Compatible with Vortex GS-10 and GS-20 systems

5.3.2.37 Extension Antenna Cable, TNC Male to TNC Female 6’:

• Must be 100% Compatible with OEM Part Number: 97-5794

• TNC to TNC connections

• 6 feet

5.3.2.38 BNC Whip Antenna

• Must be 100 % Compatible with OEM Part Number 93-3005

• BNC connector

5.3.2.39 O-Ring for GS Sensor

• For Vortex GS-10/20 enclosure, must be 100% Compatible with

OEM 92-3344

5.3.2.40 O-Ring for LCT Enclosure

• For Monitron LCT enclosure, must be 100% Compatible with OEM Part Number 92-3310

5.3.2.41 Desiccant for GS Sensor

• For GS10/20, GSE enclosure

• 3 grams

• Must be 100% compatible with OEM Part Number 93-4752

5.3.2.42 Desiccant for LCT Enclosure

• For LCT/LCTL5

• ½ unit

• Must be 100% compatible with OEM Part Number 92-3310

5.3.2.43 Battery Harness

• For LCT/LCT75/LCTL5

• Must be 100% compatible with OEM Part Number 97-5721

5.3.2.44 Magnetic Mount Antenna with BNC Connector

• For GS70/80/90 and RD106/115/201

• Must be 100% compatible with OEM Part Number 92-3003

5.3.2.45 Ground Plane Antenna with TNC male connector

• For All GS sensors and repeaters

• With enclosed spike

• 6foot cable with TNC male connector

• Must be 100% compatible with OEM part number 92-3007

5.3.2.46 BNC to BNC Connector

• BNC to BNC feed thru connector

• For LCT-75

• Must be 100% compatible with OEM part number 92-3140

5.3.2.47 SMA to TNC Bulkhead Connector

• For GS-10

• Must be 100% compatible with OEM part number 92-3247

5.3.2.48 GS External Battery Pack

• 100% compatibility with OEM part number 75-0077

5.4 Point of Delivery:

If not otherwise listed, all equipment will ship to the address listed below:

Ronald Sickler Customs and Border Protection Integrated Logistics Branch 7400 Meridian Pl. N.W., Suite A Albuquerque, New Mexico 87121 Phone: 505-352-3541 Ronald.C.Sickler@cbp.dhs.gov

5.5 Documents:

As referenced in Section 4.3, the contractor shall provide copies of the documents listed below. Contractor shall deliver one (1) copy of the data in paper form and one

(1) copy in electronic form, and shall be included with each shipment. The electronic form shall be in Microsoft Word format or Adobe Acrobat:

a. Operations Manual

b. Equipment Specifications

6 GOVERNMENT FURNISHED EQUIPMENT AND INFORMATION

The Government does not anticipate providing any Government Furnished Equipment (GFE) or Government Furnished Information (GFI).

7 PLACE OF PERFORMANCE / DELIVERY

The point of delivery is the location specified in Section 5.4 in this SOW.

mailto:Ronald.C.Sickler@cbp.dhs.gov

8. TERM OF CONTRACT

The equipment delivery shall begin within thirty (30) calendar days after award, and final delivery of all products described in this SOW shall be determined after receipt of award.

The period of performance is one (1) Base Year and three (3) 12-month option year period.

9. SECURITY

There are no specific requirements associated with this acquisition action. Information is deemed unclassified, Law Enforcement Sensitive.

10. ACCESSIBILITY REQUIREMENTS (SECTION 508)

a. Section 508 of the Rehabilitation Act, as amended by the Workforce Investment Act of 1998 (P.L. 105-220) requires that when Federal agencies develop, procure, maintain, or use electronic and information technology (EIT), they must ensure that it is accessible to people with disabilities. Federal employees and members of the public who have disabilities must have equal access to and use of information and data that is comparable to that enjoyed by non-disabled Federal employees and members of the public.

All EIT deliverables within this work statement shall comply with the applicable technical and functional performance criteria of Section 508 unless exempt.

b. Section 508 Applicable Exceptions

DHS Office of Accessible Systems and Technology has reviewed this acquisition request and has determined that a National Security Exception for the purposes of Section 508 applies and is thereby authorized. National Security Exception CBP- 20170713-001 has been attached and included in the contract file.

11. SPECIAL CONSIDERATIONS

a. Changes to the SOW:

No changes to this SOW or cost shall be incurred without prior approval of the CO and without coordination with the COR. The CO is the only individual with the authority to amend this contract. Any changes or cost increases will not take effect until the CO executes a written modification.

b. Travel:

Travel is not required to support the tasks identified in the SOW.

12. POINTS OF CONTACT

Direct questions and concerns regarding this purchase request to the Points of Contact (POC) as designated below.

6.1 Technical POC:

To be provided at award.

a. COR:

To be provided at award.

b. CO:

Frank S. Duarte Contracting Officer CBP, Office of Acquisition Border Enforcement Contracting Division – Pacific Branch Tucson, AZ 85705 Phone: 202-425-1775 Email: frank.s.duarte@dhs.gov mailto:frank.s.duarte@dhs.gov

ADDENDUM A - Acronym List

AES Advanced Encryption Standard BPES Border Patrol Enforcement Systems BPMN Business Process Modeling Notation CA Chief Architects CBP Customs and Border Protection CFR Code of Federal Regulations CIO Chief Information Officer CO Contracting Officer COR Contracting Officer’s Representative CoT Cursor on Target COTR Contracting Officer’s Technical Representative, see COR COTS Commercial of the Shelf CTO Chief Technology Officer (CTO) DHS Department of Homeland Security DUNS Data Universal Numbering System EA Enterprise Architecture EDMO Enterprise Data Management Office eGIS Enterprise Geospatial Information Services EIT Electronic and Information Technology ESD Enforcement Systems Division FAR Federal Acquisitions Regulations FEA Federal Enterprise Architecture FFP Firm Fixed Price FIPS Federal Information Processing Standards FOV Field of View GFE Government Furnished Equipment GFI Government Furnished Information GIS Geospatial / Geographic Information Systems HLS Homeland Security HSAR Homeland Security Acquisition Regulation I4c2 ICAD Command and Control Video Display System ICAD Intelligent Computer Assisted Detection IPP Invoice Process Platform IPv6 Internet Protocol version 6 ISA Interconnection Security Agreement ISB Infrastructure Services Branch IT Information Technology I-UGS Imaging Unattended Ground Sensor

LES Law Enforcement Sensitive LPDA Log-Periodic Dipole Array MROD Mission Readiness Directorate MSO Mission Support Officer MTS Micro Tremor Sensor NIEM National Information Exchange Model NiMH Nickel–Metal Hydride NiSI National Intrusion Sensor Infrastructure NSA National Security Agency OEM Original Equipment Manufacturers OMB Office of Management and Budget PIR Passive Infrared PKI Public Key Infrastructure PL Public Law PO Purchase Order POC Point of Contact RF Radio Frequency SD Secure Digital SDHD Secure Digital High Capacity SHXC Secure Digital eXtended Capacity SOW Statement of Work SPAD Strategic Planning and Analysis Directorate TAA Trade Agreements Act TACCOM Tactical Communications TALMEC Tactical Air Land & Marine Enterprise Communications TI Technology Insertion TRM CBP Technical Reference Models UGS Unattended Ground Sensor UML2 Universal Modeling Language USBP United States Border Patrol USBP-GIS United States Border Patrol Geospatial Information Systems Branch

ADDENDUM A - Acronym List