2-Measurement and Payment.docx

MEASUREMENT AND PAYMENT FOR BID SCHEDULE LINE ITEMS

MOBILIZATION AND DEMOBILIZATION

Payment shall be made at the contract lump sum price for transportation of equipment, material, and personnel to and from the job site location (regardless of trips required), all required permits and fees, taxes, and all other necessary items to complete the work.

SOLID SEWER PIPE, 4-INCH PVC SDR 35

Payment for solid sewer pipe, as specified in the Design, shall be made at the contract unit price for the size of pipe listed based on the number of linear feet installed. Payment shall include excavation, backfill and compaction; all pipe and fittings; connection of the solid sewer pipe to an existing sewer service line or home; testing; resurfacing trenched areas to equal or better condition than existing; and all other necessary items for a complete and operational installation.

UNDERGROUND TWO-WAY CLEANOUT

Payment for the underground two-way cleanout, as specified on the Design, shall be made at the contract unit price for the number of underground cleanouts installed. Payment shall include excavation, backfilling and compaction, all pipe and fittings, and all other necessary items for a complete and operational installation. No payment shall be made for cleanouts installed above grade as part of the connection to existing house, or as part of drop manholes.

1,000-GALLON, 2-COMPARTMENT CONCRETE SEPTIC TANK

Payment for the two-compartment septic tank, as specified in the Design, shall be made at the contract unit price for the size and type of tank listed based on a complete system. Payment shall include excavation, backfill, compaction, sand or gravel where non-uniform native soil or groundwater is present, dual compartment concrete septic tank, two 24-inch watertight ribbed PVC risers with fiberglass lids, baffle, plumbing, fittings, connection to solid sewer pipe, 1/16 inch mesh effluent filter (Orenco Biotube FT-Series or equal), resurfacing excavated areas to equal or better condition than existing and grading to direct surface runoff away from tank, and all other necessary items needed for a complete and operational installation.

1,000-GALLON CONCRETE PUMP TANK, PUMP (ORENCO PFEF40-B OR EQUIVALENT), AND CONTROLS Payment for the pump tank, as specified in the Design, shall be made at the contract unit price for the size listed based on the number of pump tanks installed. Payment shall include excavation, backfill, compaction, sand or gravel where non-uniform native soil or groundwater is present, resurfacing excavated areas to equal or better condition than existing and grading to direct surface runoff away from tank, pump tank, two risers and lids, connection to septic tank, plumbing, valves, fittings, pump , floats, fused disconnect (when required), watertight junction box, high water alarm, control panel, connection to the existing home electrical subpanel, testing, configuring the control panel and pump/dosing settings at system start-up, L&I inspection, and all other necessary items for a complete and operational installation.

EFFLUENT TRANSPORT LINE, 2-INCH PVC SCH 40, WITH 20-FT SLEEVE UNDER DRIVEWAY

Payment for the effluent transport line, as specified on the Design, shall be made at the contract unit price for the size of pipe listed based on the number of linear feet installed. Payment shall include excavation, trenching, backfill and compaction, all pipe and fittings, pipe encasement sleeve under driveway and extending a minimum of five feet on either side of driveway, resurfacing trenched areas to equal or better condition than existing; and all other necessary items for a complete and operational installation.

LOW-PRESSURE CHAMBER DRAINFIELD

Payment for the low-pressure chamber drainfield, as specified in the Design, shall be made at the contract unit price based on the number of linear feet of drainfield trench installed. Compensation shall include payment for excavation, trenching, and backfill, all pipe and fittings, low-profile chamber units (Infiltrator or equivalent), distribution valve enclosure, gate valves for each lateral, manifold, observation ports, final grading, resurfacing excavated areas to equal or better condition than existing, hydro seeding or grass seeding, dispersal and/or disposal of any excess excavated soil, and all other necessary items needed for a complete and operational installation.