2 Drawing 0212766_C_CUI.pdf

DW

G. NO.

SH

12345678

A

B

C

D

E

F

A

C

D

E

F

8 7 6 5 4 3 2 1

55910 F SIZE - ASME Y14.100, REV 12-2004 FILE DATE: 2010/07/27 FILE NAME: 0212766_C_Cable Assembly, Radome To Mast, N-Chann

SHEET 1 OF 1

56380 L-73069

COGNIZANT CODE

0218375

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

2007/12/10

F

THIRD ANGLE PROJECTION

CABLE ASSEMBLY, RADOME

TO MAST, N-CHANNEL

0212766

REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

0212766

SUGGESTED SOURCE OF SUPPLY

VENDOR

ADDRESS CAGE CODE

VENDOR

PART NO.

PART NO.

TENSOLITE RF/MICROWAVE

3000 COLUMBIA HOUSE BLVD.

VANCOUVER, WA 98661

PH# 360-619-5662

FAX 360-759-4016

55910- 0212766-1

THRU

55910-

0212766-8

64023 R. J. Motyl

OE-4671(V)2/URD

NOTES:

1. WORKMANSHIP ON THIS ASSEMBLY SHALL BE IN ACCORDANCE WITH

MIL-STD-454A, GUIDELINE 9.

2. MARK LABEL SLEEVING (FIND NO. 3) AS SHOWN IN LABEL TABLE IN .12 HIGH

GOTHIC CHARACTERS (BLACK) IAW MIL-STD-130. INSTALL SLEEVINGS PRIOR

TO CONNECTOR ASSEMBLY APPROXIMATELY WHERE SHOWN

3. SOLDERING SHALL BE IAW MIL-STD-454A, GUIDELINE 5.

4. ALL CONNECTOR PINS MUST BE SOLDERED. NO CRIMPING.

5. ASSEMBLY OF CONNECTORS WITH CABLE TO CONFORM TO MANUFACTURERS

SPECIFICATIONS. GASKETS MUST BE INSIDE ALL CONNECTORS.

6. IF COMPONENTS IN PARTS LIST ARE NOT USED , MIL-SPEC EQUIVALENT

COMPONENTS MAY BE USED PROVIDED SAMPLE CABLE ASSEMBLIES ARE SENT

TO REQUESTOR FOR EVALUATION AND APPROVAL.

7. CABLE ASSEMBLY SHALL HAVE AN ELECTRICAL PHASE LENGTH OF 3104° ±2°

@3.0GHz @70°F. IT SHALL HAVE A PHYSICAL LENGHT OF APPROXIMATELY

24.00 INCHES.

8 CABLE ASSEMBLY SHALL HAVE HEAT SHRINK TUBING F/N 5

APPROXIMATELY 4 INCHES LONG, F/N 6 APPROXIMATELY 3 INCHES LONG

AND F/N 7 APPROXIMATELY 1.5 INCHES LONG INSTALLED TO FUNCTION AS

CABLE STRAIN RELIEF.

9. WIRE ALL CABLE ASSEMBLY IN ACCORDANCE WITH SCHEMATIC.

4AR

4 AR

-1 CABLE ASSEMBLY

2 AR

3 3

3 2

SIGNAL

RING

PIN

RING

PIN

SCHEMATIC

P1 P2

SHIELD SHIELD

LABEL TABLE

DASH NO.

-1

LEFT

1W17P1

CENTER RIGHT

1W17P2

-2 1W18P1

-3 1W19P1

1W18P2

1W19P2

-4 1W20P1 1W20P2

55910-0212766-1 1W17

55910-0212766-2 1W18

55910-0212766-3 1W19

55910-0212766-4 1W20

-1

QTY REQD

CAGE

CODE

PART OR IDENTIFYING

NUMBER

DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG

FIND

NO.

3 MIL-DTL-2305306090TMS-SCE-3/8-2.0-9 SLEEVING, LABEL, WHITE 3

AR QQ-S-571SN63WRAP3 SOLDER 4

AR MIL-DTL-23053 5

AR 64023 7111450418 CABLE, COAXIAL 2

2 64023 3-1850-410-14 CONNECTOR, PLUG 1

-2-3-4

AR

AR

AR

AR

AR

AR

AR

AR

AR

PARTS LIST

-5 1W21P1 1W21P2 55910-0212766-5

1W21

-6 1W22P1 1W22P2 55910-0212766-6

1W22

-7 1W23P1 1W23P2 55910-0212766-7

1W23

-8 1W24P1 1W24P2 55910-0212766-8

1W24

-5

AR

AR

AR

-6

AR

AR

AR

-7

AR

AR

AR

-8

AR

AR

AR

A2 A CHGD P/N OF F/N 1 WAS 2008/07/12 RJM

3-1840-210-11.

CHGD P/N OF F/N 2 WAS

7111250418.

D8 B ADDED NOTE 12. 2009/04/06 RJM

B2 ADDED F/N 6.

A2 C CHGD PART NO. F/N 1, 2, 3 2010/07/27 RJM

AND 5.

CHGD PART NO. NAD DESC

F/N 6.

ADDED F/N 7.

E8 CHGD NOTE 4, 8 & 9.

DEL NOTE 10, 11 & 12.

C

AR 6ARARARARARARAR

24.00

AR MIL-DTL-23053ARARAR

ARARARAR

TUBING, HEAT SHRINK, 3/8"M23053/4-104-0

MIL-DTL-23053TUBING, HEAT SHRINK, 1/2"M23053/4-105-0

ARARARAR MIL-DTL-23053TUBING, HEAT SHRINK, 3/4"M23053/4-106-0ARARARAR 7

52X AR

62X AR

72X AR

DISTRIBUTION STATEMENT D - DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE

AND THEIR U.S. DOD CONTRACTORS ONLY: CRITICAL TECHNOLOGY; EXPORT CONTROLLED:

1/30/2023. OTHER REQUESTS SHALL BE REFERRED TO COMMANDER, DAHLGREN DIVISION,

NAVAL SURFACE WARFARE CENTER, 17320 DAHLGREN RD, DAHLGREN VA 22448-5100.

WARNING - WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT CONTROL REFORM ACT OF 2018 (TITLE 50, U.S.C., CHAPTER, 58, SEC. 4801-4852).

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25

DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DISTRIBUTION

DOCUMENTS DESTORY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

CONTROLLED BY: DEPARTMENT OF THE NAVY

CONTROLLED BY: NSWCDD, B51

CUI CATEGORY: CTI; EXPT

DISTRIBUTION/DISSEMINATION CONTROL: DISTRIBUTION D

POC: BRENT STEFFEY, B51, 540-653-0300

CUI

CUI

AND DOD INSTUCTION 2040.