2.1.2 21R0032 Solicitation.pdf
PDF 885 KB Posted
- Attached to
- LPAC Service Federal contract opportunity
- Solicitation number
- N0040621R0032
About this file
This is a solicitation for LPAC services to replace programmable logic controllers, compressor management system controller assemblies, and electrical enclosures at Naval Supply Systems Command Fleet Logistics Center Puget Sound in accordance with the specifications. Services include labor, travel, and per diem. The acquisition will be a firm-fixed-price contract awarded on a sole-source basis to RIX Industries utilizing FAR Part 12 and Subpart 13.5 procedures. Interested parties may submit responses prior to the July 15, 2021 offer due date solely to determine potential competition. Award is anticipated as a firm-fixed-price supply contract. Offerors are responsible for monitoring amendments on SAM.GOV and must submit completed solicitations via email as facsimile proposals are not accepted.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 2.2.4 21R0032 J&A Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SEE ADDENDUM
(No Collect Calls)
N0040621R0032 01-Jul-2021
b. TELEPHONE NUMBER
360-476-5373
8. OFFER DUE DATE/LOCAL TIME
08:00 AM 15 Jul 2021
5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
STANDARD FORM 1449 (REV. 2/2012)
Prescribed by GSA – FAR (48 CFR) 53.212
(TYPE OR PRINT)
(SIGNATURE OF CONTRACTING OFFICER)
ADDENDA ARE
26. TOTAL AWARD AMOUNT (For Gov t. Use Only )
23.
CODE 10. THIS ACQUISITION IS
SUCH ADDRESS IN OFFER
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT
BELOW IS CHECKED
TELEPHONE NO.
N004069. ISSUED BY
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK
7. FOR SOLICITATION
INFORMATION CALL:
a. NAME
MELANIE R. JOHNSON
2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER
(TYPE OR PRINT)
30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER
30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA
0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.
25. ACCOUNTING AND APPROPRIATION DATA
1. REQUISITION NUMBER
20.
ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.
OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS
N6275821RCUS777
ARE NOT ATTACHED
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
. YOUR OFFER ON SOLICITATION
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN
% FOR:SET ASIDE:UNRESTRICTED ORX
SMALL BUSINESS
17a.CONTRACTOR/ CODE FACILITY
OFFEROR CODE
NAVSUP FLC PUGET SOUND
467 W STREET, 2ND FLOOR
ATTN: M.JOHNSON
BREMERTON WA 98314
18a. PAYMENT WILL BE MADE BY CODE
RATED ORDER UNDER
DPAS (15 CFR 700)
13a. THIS CONTRACT IS A
13b. RATING
CODE15. DELIVER TO CODE N62758 16. ADMINISTERED BY
12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-
TION UNLESS BLOCK IS
MARKED
SEE SCHEDULE
14. METHOD OF SOLICITATION
RFQ IFB RFPX
SRF YOKOSUKA
BLDG. NO. A-61
HON-CHO 1-CHOME
YOKOSUKA 238-0041
TEL: 0468-16-9177 FAX:
FAX:
TEL: 360-476-5373 SERVICE-DISABLED
VETERAN-OWNED
SMALL BUSINESS
8(A)
HUBZONE SMALL
BUSINESS
SIZE STANDARD:
1,250
NAICS:
336611
OFFER DATED
29. AWARD OF CONTRACT: REF.
DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND
EMAIL:
TEL:
31c. DATE SIGNED
SEE SCHEDULE
SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT
24.22.21.19.
WOMEN-OWNED SMALL BUSINESS (WOSB)
ELIGIBLE UNDER THE WOMEN-OWNED
SMALL BUSINESS PROGRAM
EDWOSB
32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS
(CONTINUED)
PAGE 2 OF45
ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________
32a. QUANTITY IN COLUMN 21 HAS BEEN
RECEIVED INSPECTED
32b. SIGNATURE OF AUTHORIZED GOVERNMENT
REPRESENTATIVE
32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT
REPRESENTATIVE
32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE
37. CHECK NUMBER
FINALPARTIALCOMPLETE
36. PAYMENT35. AMOUNT VERIFIED
CORRECT FOR
34. VOUCHER NUMBER
FINAL
33. SHIP NUMBER
PARTIAL
38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY
41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT
41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE
42a. RECEIVED BY (Print)
42b. RECEIVED AT (Location)
42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS
STANDARD FORM 1449 (REV. 2/2012) BACK
Prescribed by GSA – FAR (48 CFR) 53.212
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
SEE SCHEDULE
20.
SCHEDULE OF SUPPLIES/ SERVICES
21.
QUANTITY UNIT
22. 23.
UNIT PRICE
24.
AMOUNT
19.
ITEM NO.
N0040621R0032
Section A - Solicitation/Contract Form
NOTICE TO OFFERORS
NOTICE TO INTERESTED PARTIES
1. This solicitation is for the procurement of LPAC Services in support of SRF-JRMC Yokosuka, Japan. It is anticipated that this solicitation will result in an award of a Firm, Fixed-Price Service type contract.
2. The entire solicitation shall be filled out, signed, and returned as part of your quote. See block 8 on page 1 of the solicitation for the closing date and time.
3. The deadline for submission of questions regarding the solicitation’s terms, conditions, specifications, and/or the statement of work (SOW) / performance work statement (PWS) is 05 July 2021 by 3pm PDT.
4. Quotes will be evaluated in accordance with FAR 52.212-2 Evaluation Commercial Items.
5. All questions in regards to this solicitation shall be submitted, via email, to the Contract Specialist (listed below):
Name: Melanie Johnson Email: melanie.r.johnson1@navy.mil
Section B - Supplies or Services and Prices
ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT
0001 1 Job LPAC No 1 thru 3 Services
FFP
Replacement of the Programmable Logic Controller, Compressor Management System Controller Assembly, and Enclosures in accordance with the PWS, TGIs and TPs. Includes labor, travel, and per diem needed to accomplish the work.
FOB: Destination
MILSTRIP: N6275821RCUS777
PURCHASE REQUEST NUMBER: N6275821RCUS777
PSC CD: J043
NET AMT
0002 3 Each
PROGRAMMABLE LOGIC CONTROLLER
FFP
Programmable Logic Controller for LPAC No. 1 thru 3 P/N: A76-D19607-2 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.
FOB: Destination
MILSTRIP: N6275821RCUS777
0003 3 Each
ELECTRICAL ENCLOSURE
FFP
Compressor Management System Electrical Enclosure for LPAC No. 1 thru 3 P/N: 66612187 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.
FOB: Destination
MILSTRIP: N6275821RCUS777
0004 1 Each
COMPRESSOR MANAGEMENT SYSTEM CONTROLLER
FFP
Compressor Management System Controller Assembly for LPAC No. 3 P/N: 66612188 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.
FOB: Destination
MILSTRIP: N6275821RCUS777
0005 3 Each
HIGH VOLTAGE ENCLOSURE
FFP
High Voltage Enclosure for LPAC No. 1 thru 3 P/N: A76-D3052 NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.
FOB: Destination
MILSTRIP: N6275821RCUS777
0006 1 Job
ROM
FFP
Restriction of Movement/Quarantine 14 day period in Japan in acordance with the Travel Requirements listed within the
PWS.
FOB: Destination
MILSTRIP: N6275821RCUS777
Section C - Descriptions and Specifications
PERFORMANCE WORK STATEMENT
PERFORMANCE WORK STATEMENT
1. GENERAL SCOPE OF WORK:
This performance work statement (PWS) defines the scope of the contract, identifies technical reference documents applicable to performance of this contract; and describes the general tasks that the Government will require under this contract onboard and in support of the USS Guided Missile Destroyer (DDG) in Ship Repair Force, Japan Regional Maintenance Center (SRF-JRMC) Yokosuka, Japan.
SRF-JRMC is requesting an on-site Technical Representative to provide, remove, replace and test the Programmable Logic Controller (PLC) and Compressor Management System (CMS) controller assemblies using original equipment manufacturer (OEM) replacement controllers for Numbers 1, 2, and 3 Low Pressure Air Compressor (LPAC) in accordance with the references and instructions provided in this contract. Upon successful replacement and testing of the replacement units, the Contractor will return the old units to the OEM. The related Technical Manuals (TM), Drawings (DWG), and Test Procedures (TP) are listed in the Task Group Instruction (TGI).
2. REFERENCES:
2.1. NAVSEA Standard Items (FY21)
2.2. Local Standard Items (FY21)
2.3. TGI 38MIL55110-A01 REPL PLC, CMS CONT ASSY AND ELEC ENCL OF LPAC NO.ONE THRU
NO.3
2.4. TGI 38MIL55110-T01 Operational Test for LPAC #1 System KTR
2.5. TGI 38MIL55110-T02, Operational Test for LPAC #2 System KTR
2.6. TGI 38MIL55110-T03, Operational Test for LPAC #3 System KTR
2.7. TM S6220-EU-MMA-010, COMPRESSOR, AIR, LOW PRESSURE OIL-FREE,MODEL STAR 200C
AND 200D REV 11
2.8. TM S6220-EE-MMA-010 Compressor, Air, Low Pressure Oil Free, Model STAR 200 REV 5
2.9. TP 55153-3-301KTR.
2.10. TP 55153-3-302KTR.
2.11. TP 55153-3-303KTR.
3. REQUIREMENTS:
3.1. The Contractor shall provide CMS Electrical Enclosures and PLCs for LPACs as listed below. All work shall be accomplished in accordance with the Task Group Instruction (TGI) assigned as well as the reference identified within that TGI. In cases of inconsistencies between the TGI and the work identified in Paragraph 3.1 and 3.2, the TGI shall have precedence.
3.1.1. LPAC 1:
3.1.1.1. Remove existing equipment Programmable Logic Controller for Low Pressure Air Compressor (P/N A76-D3051) and Compressor Management System Electrical Enclosure for Low Pressure Air Compressor (P/N 66612187) in accordance with Ref 2.3, and Ref 2.7, and
2.8 as identified in Ref 2.3.
3.1.1.2. Replace equipment with Programmable Logic Controller for Low Pressure Air Compressor (P/N A76-D19607-2), and High Voltage Enclosure for Low Pressure Air Compressor (P/N A76-D3052) in accordance with Ref 2.3, and Ref 2.7, and 2.8 as identified in Ref 2.3, using OEM replacement controllers.
3.1.1.3. Perform tests in accordance with Ref 2.4. TGI 38MIL55110-T01 Operational Test for LPAC #1 System KTR and Ref. 2.9 TP 55153-3-301KTR as identified in Ref 2.4.
3.1.2. LPAC 2:
3.1.2.1. Remove existing equipment Programmable Logic Controller for Low Pressure Air
Compressor (P/N A76-D3051) and Compressor Management System Electrical Enclosure for
Low Pressure Air Compressor (P/N 66612187) in accordance with Ref 2.3, and Ref 2.7, and
2.8 as identified in Ref 2.3
3.1.2.2. Replace equipment with Programmable Logic Controller for Low Pressure Air Compressor (P/N A76-D19607-2), and High Voltage Enclosure for Low Pressure Air Compressor (P/N A76-D3052) in accordance with Ref 2.3, and Ref 2.7, and 2.8 as identified in Ref 2.3
3.1.2.3. Perform tests in accordance with Ref 2.5. TGI 38MIL55110-T02 Operational Test for LPAC #2 System KTR and Ref. 2.10 TP 55153-3-301KTR as identified in Ref 2.5.
3.1.3. LPAC 3:
3.1.3.1. Remove existing equipment Compressor Management System Controller Assembly for Low
Pressure Air Compressor No. 3 (P/N 66612187) and Compressor Management System Electrical Enclosure for Low Pressure Air Compressor (P/N 66612188) in accordance with Ref 2.3, and Ref 2.7, and 2.8 as identified in Ref 2.3
3.1.3.2. Replace equipment with Programmable Logic Controller for Low Pressure Air Compressor (P/N A76-D19607-2), and High Voltage Enclosure for Low Pressure Air Compressor (P/N A76-D3052) in accordance with Ref 2.3, and Ref 2.7, and 2.8 as identified in Ref 2.3
3.1.3.3. Perform tests in accordance with Ref 2.6. TGI 38MIL55110-T03 Operational Test for LPAC #3 System KTR and Ref. 2.11 TP 55153-3-301KTR as identified in Ref 2.6.
3.2. The Contractor shall test all Controllers in accordance with Ref 2.4. 2.5, and 2.6. and associated Test Procedures.
3.2.1. Tests shall be accomplished in the presence of SRF-JRMC QA representative.
3.2.1.1. The Contractor shall contact the Project Sup to arrange for testing oversight.
3.2.2. The Contractor shall provide a copy of the (V/G) test and inspection records to the SRF QA.
3.3. All work under this requirements must be accomplished in accordance with Ref 2.1. NAVSEA Standard Items and Ref 2.2. Local Standard Items.
3.4. Upon completion the Contractor shall arrange for shipping of controllers back to OEM
3.5. The Contractor shall contact the Government Surveillance officer (GSO) regarding any questions, recommendations, and concerns. Include the Contracting Officer (KO) in all correspondence.
Recommendations must be submitted in writing.
4. GOVERNMENT FURNISHED PROPERTY/SERVICES:
4.1. The Contractor shall have access to USS DDG spaces 4-174-0-E, 4-254-0-E for completion of the removal and replacement of the PLC and CMS.
4.2. Storage space for tools and supplies on board is not guaranteed and shall only be provided on a case by case basis when space and mission requirements allow.
4.3. The Government will provide pier laydown area as needed.
4.4. Ships force will provide tag out requirements IAW Tag out User Manual.
4.5. Utilities including Electricity, Compressed Air, and Water are available onboard the USS DDG, and are expected to be accessible within 50 feet of the work site.
5. CONTRACTOR FURNISHED PROPERTY:
5.1 The contractor must provide all tools and materials required for the removal, replacement, testing of the
CMS and PLC.
5.2 Quantity (3 EA), Programmable Logic Controller for Low Pressure Air Compressor No. One through No.
3 Parts Number: A76-D19607-2
5.3 Quantity (3 EA), High Voltage Enclosure for Low Pressure Air Compressor No. One through No. 3 Parts
Number: A76-D3052
6. ESTIMATED WORK HOURS:
Normal work is scheduled for accomplishment between the hours of 8:00AM to 4:45PM, with a 45-minute lunch break, Monday through Friday. Unless the offeror states otherwise in his proposal, the Contractor shall observe the same holidays as the Government and shall be open for business at all other times. . The contractor may be required to perform work outside the normal working hours, as requested by the project team.
7. GOVERNMENT SURVEILLANCE OFFICER:
Technical POC (Surveillance Officer) will be provided upon award
8. GENERAL INFORMATION:
8.1. Nothing contained in the performance work statement shall relieve the Contractor from complying with applicable Federal, state, and local laws, codes, ordinances, and regulations, including the obtaining of licenses and permits that may be required for the Contractor or Subcontractor(s) to perform a particular function, such as hazardous waste handling or disposal, or example.
8.2. Medical treatment. Government emergency vehicles and medical personnel shall only be used in emergency situations affecting contractor personnel whose life may be in danger or who are seriously injured. Government facilities may be used in these instances as the first point of treatment. Transfer to a non-Government medical treatment facility shall be made as soon as possible and as determined by attending medical authorities.
9. CONTRACTOR IN THE WORKPLACE:
9.1. Identification. All Contractor spaces/desks shall be clearly marked as contractor spaces only.
9.2. All e-mail addresses used by contractor personnel shall identify the company name.
9.3. All contractor correspondence shall be clearly marked with company name or letterhead.
9.4. Contractor personnel shall insure that when answering telephones that they identify themselves as contractor personnel.
9.5. Contractor personnel are not to handle/operate any lifting and handling equipment or other shop and ship equipment, machines or tools without written consent from project superintendent prior to accomplishment of the task.
10. RESTRICTIONS:
10.1. Parking - Vehicles and equipment required by the Contractor to complete this contract must be registered with Security. Forms for obtaining vehicle passes and permits may be obtained from the Receiving Activity Point of Contact. Parking is available at or near the work site or at other authorized areas on the station. Contractor vehicles must be marked on the outside with the company name or logo or both.
Failure not to comply may result in ticketing and/or loss of vehicle privileges.
10.2. Restricted Colors - Naval activities use the colors magenta and yellow to identify specially controlled materials. The contractor is specifically prohibited from using magenta and yellow colored plastic wrapping materials or bags, tape, or other covering materials.
10.3. Radio Restrictions - Operation of privately owned citizens band or amateur radio equipment (receive and transmit) within the geographic limits of the activity is prohibited. All radio equipment installed in privately owned motor vehicles must be turned off upon entering the premises.
10.4. Privately Owned Personal Computers and Cellular Telephones - The used of privately owned personal computers and cellular telephones by contractor personnel while on Naval Installations is restricted.
Contractors requiring such devices in the performance of this contract shall obtain a copy of the applicable parts of Naval Instruction from the Contracting Officer.
10.5. Photography/Recording - Contractor personnel are prohibited from having photographic equipment, tape recorders, or other recording devices in their possession while inside the Operations Area (OA).
11. SAFETY AND ENVIRONMENTAL
11.1. Safety Requirements. The contractor shall establish, administer, and enforce safety rules that will meet the current requirements of the Occupational Safety and Health Administration (OSHA), and all applicable work item references. Work to be performed under this contract shall be accomplished using the guidelines identified Contractors and Subcontractors. When necessary, work shall be coordinated with the Safety Department to ensure all safety and health requirements are considered.
11.2. Safety Equipment. The contractor shall provide their employees with all necessary safety equipment during the performance of work on this contract. All contractor personnel shall have in their possession and shall properly wear OSHA approved personnel protective safety equipment (i.e. hard-hats, steel-toe safety shoes, safety glasses and hearing protection).
11.3. Prior to commencing work, the Contractor representative(s) shall arrange with the Receiving Activity Point of Contact, to meet in conference with the customer, shop supervision, and other necessary personnel to discuss and develop mutual understandings relative to the administration of the Safety Program.
11.4. Environmental Requirements. Work performed under this contract shall be in compliance with all Japanese, Navy, Federal, State and local regulations, and all work items references, pertaining to the environment at all times. When necessary, work shall be coordinated with the Environmental Department to ensure that regulations are considered.
11.5. Responsibilities. The contractor bears sole responsibility for the safety of his her employees and compliance with environmental regulations. Naval safety personnel will monitor the safety of procedures, conduct inspections of the workplace, and perform safety related investigations, evaluations. The contractor shall conduct routine inspections of work and storage areas under his cognizance to maintain compliance with the cleanliness, material and waste management, air and water pollution controls, and provides general oversight on the environmental issues associated with this contract.
11.6. Situations that warrant corrective action will be brought to the attention of the contractor through the Government Surveillance Officer (GSO). If violations could cause major damage or loss of life, Safety or Environmental personnel may contact contractor supervisory personnel on site and request corrective action or work stoppage. The GSO will be notified immediately. The Commanding Officer has final authority for Station safety and environmental matters. He has delegated the Safety and Occupational Health Manager the authority to represent the Command in all safety matters and to resolve any disputes which may arise, and he has delegated the Environmental Manager the authority to represent the Command in all safety matters and to resolve any disputes, which may arise. Any interpretation of the various environmental regulations will be made by the Safety or Environmental Manager.
11.7. Accident Reporting. All accidents occurring on Station are reported to the Station Safety Department. If accidents occur after regular working hours the Command Duty Officer, shall be notified. Motor vehicle accidents occurring on Station are reported to both the Safety Department and Security Manager. In all cases, the accident scene must be preserved until the Government investigator has authorized movement of the materials and vehicles involved. Materials and equipment may be moved only as necessary to facilitate the removal of injured persons. The contractor shall forward a copy of all accident reports involving contractor employees to the GSO. If Government property is involved, a copy of the accident report shall also be forwarded to the Government Property Administrator (GPA).
12. SECURITY
12.1. Admittance to the Work: Upon contract award, employees or representatives of the Contractor may require access to the Receiving Activities Operations Area (OA) or Industrial Area (IA) and shall be admitted to the work site only after they have been issued a Security Pass/ID Badge.
12.2. Notice: Persons who are currently on probation or parole from a felony conviction cannot qualify for security clearances, and will be denied access to the activity.
12.3. It shall be the Contractor's responsibility to collect and account for all identification passes issued to their personnel at the expiration of the contract or when access is no longer required.
12.4. Foreign Nationals or Affiliations - Foreign Nationals (non U.S. Citizens) or persons affiliated with, or employed by, a foreign owned company will not be granted access to a Naval Activity's OA/IA, without prior written approval from Commander, Naval Sea Systems Command.
13. PERFORMANCE REQUIREMENT STATEMENT SUMMARY
Primary Performance Standard Performance
Standard/AQL Performance Assessment Method
Replacement and testing of required items Services performed meet requirements 100% of the time
Review of performance by Surveillance Officer
The contractor maintained close liaison and good communications with the Government
Any problems or questions encountered by either party are addressed within 2 business days
Review of performance by Surveillance Officer
The contractor invoiced in a timely manner and in accordance with the contract
Invoices submitted with COR/Surveillance Officer signature
Review of performance by Surveillance Officer
Combating Trafficking in Persons - Using mindful observance and attentive listening the Surveillance Officer will monitor the contractor’s performance regarding trafficking in persons such that non-compliance with FAR clause 52.222-50, Combating Trafficking in Persons, is brought to the immediate attention of the contracting officer.
100% compliance with FAR 52.222-50
All times the Surveillance Officer interfaces with the contractor
AQL = Acceptable Quality Level
14. Defense Biometric Identification System (DBIDS) for vendor base access
Vendor’s requesting base access must go to the following website and register: http://dbids.dmdc.mil/#!/.
Vendor’s must request for base access as soon as possible after receiving award to ensure that all employees base access request(s) are approved before the start of the contract’s period of performance.
15. Shipping Address
U.S. NAVAL BASE YOKOSUKA
NAVAL SHIP REPAIR FACILITY, BLSG. A-61
1-HONCHO, YOKOSUKA, KANAGAWA 238-0041
ATTN: RECEIVING OFFICER Code: 501A PH: 046-816-7184 SSN : 243–0128 Mark For: WILL BE PROVIDED AT AWARD (Contract Number): N. Yanagawa C331, tel 080-1378-4534
16. Travel Requirements
The following are the requirements for entry into Japan as of 2 November 2020 that Contractors shall comply with. See Section 3 for Pre-departure requirements and Section 4 for procedures upon arrival in Japan.
1. IN UPDATE TO REF F, THE PURPOSE OF THIS MESSAGE IS TO
PROVIDE UPDATED POINT OF CONTACT INFORMATION TO SYSCOMS, WARFARE
CENTERS AND CONTRACTING ACTIVITIES RESPONSIBLE FOR THE COORDINATION
OF SHIP REPAIR AND MODERNIZATION EFFORTS IN JAPAN.
2. GUIDANCE ISO DOD AND INTERNATIONAL RESTRICTIONS AS A RESULT OF
COVID-19 MITIGATION ACTIONS. SRF-JRMC IS UTILIZING THE FUNCTIONALITY
OF THE REGIONAL MAINTENANCE AND MODERNIZATION COORDINATION OFFICE
(RMMCO) IDENTIFIED IN REFS (A) AND (B) TO MANAGE THESE UNIQUE TRAVEL
REQUIREMENTS.
3. ANY PERSONNEL SUPPORTING SRF-JRMC MAINTENANCE AND MODERNIZATION
SHALL COMPLY WITH THE GUIDANCE PROVIDED OR RISK DENIAL OF ENTRY TO
JAPAN AND/OR COMMANDER FLEET ACTIVITIES YOKOSUKA (CFAY) OR
COMMANDER FLEET ACTIVITIES SASEBO (CFAS). DUE TO COVID-19
RESTRICTIONS, ENTRY REQUIREMENTS TO JAPAN IN SUPPORT OF MISSION
ESSENTIAL MAINTENANCE/MODERNIZATION IN WHICH SRF-JRMC SERVES AS
THE NAVAL SUPERVISORY AUTHORITY (NSA) ARE AS FOLLOWS (PRE-DEPARTURE):
A. PERSONNEL MUST HAVE A VALID PASSPORT FOR THE INTENDED PERIOD
OF STAY IN JAPAN.
B. APPROVAL MUST BE OBTAINED THROUGH TRAVEL TRACKER INDIVIDUAL
ANTI-TERRORIST PLAN (TT/IATP) VIA THE IATP.PACOM.MIL WEBSITE. THIS
REQUIRES LEVEL 1 ANTI-TERRORIST AND SURVIVAL, EVASION, RESISTANCE,
AND ESCAPE (SERE) TRAINING BE ACCOMPLISHED VIA
JKODIRECT.JTEN.MIL/ATLAS2/PAGE/LOGIN/LOGIN.JSF WEBSITE; AND A
PERSONNEL RECOVERY MISSION SOFTWARE (PRMS) SUBMISSION THROUGH
PRMSGLOBAL.PRMS.AF.MIL.
C. APPROVAL MUST BE OBTAINED THROUGH AIRCRAFT AND PERSONNEL
AUTOMATED CLEARANCE SYSTEM (APACS) FOR ENTRY TO INDOPACOM AOR. (FOR
SRF-JRMC SPONSORED WORK, SEA21 WILL PROVIDE O7 APPROVAL. ALL OTHER
SPONSORS WILL OBTAIN O7 LEVEL APPROVAL VIA THEIR COC).
HTTPS:APACS.MILCLOUD.MIL
D. PERSONNEL MUST CONTACT THE SRF-JRMC YOKOSUKA, SASEBO AND CVN
RMMCO OFFICES AT DIST-RMMCO-YOKOSUKA(AT)SRF.NAVY.MIL,
DIST-RMMCO-SASEBO(AT)SRF.NAVY.MIL, OR
DIST-CVN76-RMMCO(AT)SRF.NAVY.MIL RESPECTIVELY, FOR ARRIVAL
PREPARATIONS AND VERIFICATION OF REQUIREMENTS.
E. FOR THOSE WITHOUT A COMMAND ACCESS CARD (CAC), BASE ACCESS
REQUESTS MUST BE THROUGH THE YOKOSUKA SECURITY OFFICER
MR. SEAEN DANYIS AT SEAEN.DANYUS(AT)SRF.NAVY.MIL OR THE SASEBO
SECURITY OFFICER MR. ANTONIO QUIJANO AT
ANTONIO.QUIJANO(AT)SRF.NAVY.MIL CONSISTING OF:
1. VISIT REQUEST LETTER ON COMPANY LETTERHEAD
2. INSTALLATION ACCESS REQUEST FORM
3. LETTER OF AUTHORIZATION (LOA) OR ORDERS
4. SECNAV 5512-1
5. COLOR COPY OF TRAVELERS PASSPORT
6. USFJ FORM 27
F. A PRE-DEPARTURE HEALTH SCREENING OF ALL TRAVELERS WILL BE
ACCOMPLISHED ICW RMMCO PRIOR TO BEING PERMITTED TO COMMENCE
TRAVEL.
G. UPON RMMCO VERIFICATION THAT ALL TRAVEL REQUIREMENTS ARE
MET, SRF-JRMC WILL ISSUE A SERIALIZED GOVERNMENT OF JAPAN (GOJ)
APPROVAL LETTER TO ACCOMPANY ALL OTHER REQUIRED DOCUMENTS, TO
INCLUDE; LETTER OF AUTHORIZATION (LOA) OR ORDERS AS PROOF OF SOFA
STATUS AND VALID PASSPORT. THESE DOCUMENTS WILL BE PRESENTED TO
JAPANESE IMMIGRATION OFFICIALS UPON ARRIVAL AT PORT OF ENTRY.
CURRENT AUTHORIZED PORT OF ENTRIES INCLUDE COMMERCIAL AIRPORTS AT
TOKYO (NRT OR HND) AND MILAIR VIA YOKOTA AND OTHER LOCATIONS
APPROVED BY C7F OR CPF.
4. UPON COMMENCING TRAVEL, THE FOLLOWING POST-DEPARTURE
REQUIREMENTS ARE IN EFFECT:
A. TRANSPORTATION FROM THE PORT OF ENTRY TO CFAY OR CFAS WILL
BE COORDINATED THROUGH THE RMMCO OFFICE. RMMCO OFFICE WILL PROVIDE
GOVERNMENT TRANSPORTATION INFORMATION ONLY. TRANSPORTATION WILL
BE VIA GOVERNMENT TRANSPORTATION AND SHALL NOT INCLUDE USE OF PUBLIC
TRANSPORTATION BETWEEN PORT OF ENTRY AND LOCAL RESTRICTION OF
MOVEMENT (ROM) BASE (CFAY OR CFAS). IT IS THE TRAVELERS
RESPONSIBILITY TO UTILIZE GOVERNMENT TRANSPORTATION FROM PORT OF
ENTRY TO CFAY OR CFAS.
B. TRAVELERS WILL BE TESTED FOR COVID-19 UPON ENTERING JAPAN
AND ARE HIGHLY RECOMMENDED TO BE TESTED FOR COVID VIRUS WITHIN
72 HOURS PRIOR TO TRAVELING. TRAVELERS WHO ARE FOUND POSITIVE FOR
COVID-19 MUST BE PREPARED FOR:
1. ISOLATION FOR A MINIMUM OF 14 DAYS WITHIN CFAY
BARRACKS OR DESIGNATED QUARANTINE FACILITY.
2. ROOM CLEANING CHARGE UP TO $1000.
3. CASH OR ELECTRONIC FUNDS TRANSFER TO ALLOW FOR
PURCHASING OF FOOD AND INCIDENTALS.
C. TRAVELERS WILL ENTER A 14 DAY ROM PERIOD ON BASE
(CFAY OR CFAS) AND WILL NOT BE ALLOWED TO UTILIZE PUBLIC
TRANSPORTATION. DAILY SELF HEALTH CHECKS WILL COMMENCE UPON
ENTRY INTO JAPAN. TRAVELERS SHOULD INCLUDE A PERSONAL THERMOMETER
FOR TAKING DAILY TEMPERATURE READINGS. THE DAILY HEALTH CHECKS WILL
BE REPORTED TO THE APPROPRIATE RMMCO OFFICE OR ON-SITE SPONSOR. IN
THE EVENT A TRAVELER SHOWS INDICATION OF INFLUENZA LIKE ILLNESS
(ILI), SRF-JRMC RMMCO OFFICE WILL COORDINATE FURTHER HEALTH
ASSESSMENT REQUIREMENTS WITH THE LOCAL MILITARY TREATMENT FACILITY
(MTF).
D. UPON COMPLETION OF THE 14-DAY ROM PERIOD, THE RMMCO OFFICE
WILL COORDINATE THE BASE CHECK IN PROCESS. ENTRY ON TO
COMMANDER FLEET ACTIVITIES YOKOSUKA OR SASEBO WILL REQUIRE:
1. CAC (IF GOVERNMENT EMPLOYEE)
2. REGISTRATION IN DBIDS IS CRITICAL TO ENSURE BASE ACCESS
PRIORITY ISO MISSION ESSENTIAL TASKING IN CASE BASE HPCON LEVEL
CHANGES.
3. VISIT REQUEST VIA JPAS FOR SHIPBOARD ENTRY.
4. GOVERNMENT ORDERS (IF GOVERNMENT EMPLOYEE) OR LETTER
OF AUTHORIZATION (IF CONTRACTOR EMPLOYEE). THESE DOCUMENTS SHOULD
INDICATE MISSION ESSENTIAL NATURE OF WORK.
5. SATISFACTORY DAILY SELF HEALTH CHECK.
E. COMMENCE WORK THROUGH WORK COMPLETION PERIOD. DAILY HEALTH
SCREENINGS WILL BE REQUIRED TO BE CONDUCTED BY EACH TRAVELER AND
REPORTED TO THEIR RESPECTIVE ONSITE LEAD OR SPONSOR, AND REPORTED TO
THE RMMCO OFFICE. ADDITIONAL SCREENINGS BY BASE OR SHIP PERSONNEL
ARE LIKELY AND MAY INCLUDE TEMPERATURE CHECKS. FACE MASKS ARE
MANDATORY TO BE WORN AT ALL TIMES WHILE ON BASE (CFAY OR CFAS), AND
HIGHLY ENCOURAGED TO BE WORN OFF BASE. IF AT ANY TIME A TRAVELER
SHOWS INDICATIONS OF ILI, THEY SHOULD RETURN OR REMAIN AT THEIR
TEMPORARY LODGING AND REPORT STATUS TO THEIR RESPECTIVE ONSITE
LEAD OR SPONSOR, TO BE REPORTED TO THE RMMCO OFFICE.
F. UPON COMPLETION OF WORK, TRAVELERS SHALL REPORT AND CHECKOUT
WITH THE RMMCO OFFICE TO VERIFY ANY ADDITIONAL PERMISSIONS REQUIRED
FOR EXITING JAPAN.
5. ADDITIONAL REQUIREMENTS:
A. IAW REF A, ALTERATION INSTALL TEAM (AIT)S ARE REQUIRED TO
START RMMCO CHECK-IN PROCESS PRIOR TO ARRIVAL IN JAPAN. RMMCO
YOKOSUKA POCS ARE MR. STEVEN FARRIS AND MR. RICHARD PETERS,
DSN (315)243-0994, EMAIL: DIST-RMMCO-YOKOSUKA(AT)SRF.NAVY.MIL.
RMMCO SASEBO POCS ARE MR. THOMAS BUCK AND MR. LEONARDERIC MANALO,
DSN (315)252-6602/2805, EMAIL: DIST-RMMCO-SASEBO(AT)SRF.NAVY.MIL.
RMMCO CVN POCS ARE MR. RENATO DACUMOS,
RENATO.DACUMOS(AT)SRF.NAVY.MIL, DSN (315)243-2282, AND
MS. SARAH BROWN, SARAH.BROWN.CTR(AT)SRF.NAVY.MIL, DSN (315)243-2290,
OR DIST-CVN76-RMMCO(AT)SRF.NAVY.MIL.
B. IAW REF C, COUNTRY CLEARANCE REQUESTS ARE TO BE SUBMITTED A
MINIMUM OF 30 DAYS PRIOR TO TRAVEL.
C. ANY TRAVELER ENTERING CFAY OR CFAS IS SUBJECT TO DEBARMENT
FROM BASE AND REVOCATION OF VISIT CLEARANCE IF FOUND IN VIOLATION
OF ROM AND OR LIBERTY REQUIREMENTS.
17. Information for Contractor Employees Seeking to Enter Japan
1. The following is provided for the information of contractors to the U.S. Navy whose employees need to enter Japan to perform contract requirements. The information is current as of April 4, 2020. While the information is believed to be accurate, policies and procedures are continuing to change on a regular basis.
2. In response to the COVID-19 outbreak, the Government of Japan has banned the entry of non-Japanese citizens into Japan who have visited a number of listed countries within the immediately preceding 14 days.
The United States is one of the listed countries. See https://www.japan.travel/en/coronavirus/ for a list of the current restrictions. Notwithstanding the list, Japan is permitting individuals to enter Japan who are covered by the Status of Forces Agreement (SOFA) between the U.S. and Japan. The SOFA covers employees of contractors to the U.S. Navy who are U.S. nationals, are not ordinarily resident in Japan, whose presence in Japan is at the official invitation of the United States Government, and who are in Japan solely for official purposes in connection with the U.S. armed forces.
3. Japan is allowing contractor employees within the scope of the SOFA to enter Japan so long as two conditions are met: First, travelers are not permitted to use public transportation from the initial point of entry to Japan, including domestic air travel. Second, the incoming traveler must be placed in a Restriction of Movement (ROM) status under U.S. control for the initial 14 days after they arrive in Japan.
4. All contractor personnel arriving in Japan should utilize the process outlined in the attached USFJ Instruction to ensure they are recognized as members of the civilian component under Article 1.b. of the SOFA. The process requires that a contractor contact the contracting officer for the contract on which its employee will perform in Japan prior to the employee traveling to Japan. Contact is made through the Synchronized Pre-deployment and Operational Tracker (SPOT) system. The contractor will provide information to the contracting officer about the traveling employee. Following review, the contracting officer will issue the contractor a Letter of Authorization (LOA). The incoming contractor employee will hand carry a copy of the LOA and show it to the Japanese immigration authority at the port of entry as evidence of SOFA status.
Contractors who do not have current access to SPOT should contact their contracting officer for information about accessing SPOT.
5. It is essential that contractors carefully manage each trip into Japan by a contractor employee to ensure that both of the conditions above are fully met. It is suggested that the best way for personnel to arrive in Japan for travel to Misawa, Iwakuni/Sasebo, or Okinawa is via the PATRIOT EXPRESS. This will allow for uninterrupted travel to their final destination. If going to Sasebo or to any base in Okinawa other than Kadena AB, travel from Iwakuni or Kadena AB will need to be by private conveyance or GOV. If a traveler headed outside the Kanto Plain arrives via commercial air, they will need to use government transportation to Yokota AB or NAF Atsugi and then do onward movement by milair - or do their 14 day ROM and then travel to their final destination by commercial transport. For personnel arriving on the Kanto Plain, they can travel via PATRIOT EXPRESS or by commercial air. However, travel from the airport to their place where they will satisfy the ROM requirement will need to be by private conveyance or GOV.
6. Some travelers have had difficulty with airlines allowing the travelers to get on flights or with Japan’s Ministry of Health allowing the SOFA persons to avoid quarantine in the immediate vicinity of the airport of initial arrival in Japan. Ensuring that each contractor employee has a copy of the SPOT LOA documenting their SOFA status should minimize these issues. Japan’s Ministry of Foreign Affairs issued a letter of 1 April 2020 describing the two conditions that must be met for those covered by the SOFA to be allowed access to Japan. A copy is attached. In addition to the LOA, it may be helpful for incoming contractor employees to bring a copy of the 1 April 2020 letter with them. The letter sets the conditions that apply for entrance but, by itself, doesn’t establish that the holder of the letter is covered by the SOFA. The separate LOA is necessary to confirm that the employee is covered by the SOFA. The letter of 1 April 2020 includes representation that US Forces Japan will provide transportation from an airport of port of entry to a US Forces japan facility. The letter should not be understood as changing the terms or conditions of any existing contract to require that the U.S. Navy or U.S.
Government provide contractor employees transportation where that transportation is not otherwise addressed in the relevant contract.
7. This memo is intended to provide current information for contractors whose employees need to enter Japan to perform contract requirements. Nothing in the memo should be understood to change the terms or conditions of an existing contract. Any such changes must be made by an authorized contracting officer.
Attachments:
1. USFJI 64-100, Contract Performance in Japan (25 Oct 2019)
2. Letter of April 1, 2020, Ministry of Foreign Affairs of Japan
CLAUSES INCORPORATED BY FULL TEXT
THE FOLLOWING NAVSUP LOCAL TEXT IS HEREBY MADE PART OF THE STATEMENT OF
WORK/PERFORMANCE WORK STATEMENT.
NAVSUP Fleet Logistics Center Puget Sound may utilize contractor support through the AbilityOne Program, as needed, to perform contract closeout functions for this acquisition. Information, including business sensitive/confidential or proprietary data, that the offeror provides to the Government or information already in the possession of the Government may be viewed and utilized by the AbilityOne Program support contractor personnel during the course of its contract performance. The information that may be made available to the support contractor may include, for example, pricing and technical proposals, historical contract, pricing and performance information, Commercial Asset Visibility (CAV) reporting information and similar data/information.
By submission of a proposal in response to this solicitation, the offeror and its subcontractors consent to a release of their business sensitive/confidential or proprietary data to the Government's AbilityOne Program support contractor personnel in order to perform close out services. Prior to the release of any such information to the support contractor, the support contractor will have in place with the Government a Non-Disclosure/Non-Use Agreement in accordance with the terms of the AbilityOne Program support contract.
Offerors may execute their own Non-Disclosure Agreement with the AbilityOne Program (AbilityOne contact information available from the contracting point of contact). The support contractor must provide copies of the executed agreements to the Contracting Officer and the Contracting Officer's Representative (COR) for the support contract; and the offeror/contractor for this acquisition must provide copies of the executed Agreement to the Contracting Officer for this acquisition. If the offeror/contractor seeks such a Non-Disclosure Agreement with the AbilityOne Program support contractor, the Agreement must be executed no later than the date of final delivery under the resulting NAVSUP Fleet Logistics Center Puget Sound contract.
THE FOLLOWING NAVSUP LOCAL TEXT IS HEREBY MADE PART OF THE STATEMENT OF
WORK/PERFORMANCE WORK STATEMENT.
Contractor Unclassified Access to Federally Controlled Facilities, Sensitive Information, Information Technology (IT) Systems or Protected Health Information
Executive Order 13467, Reforming Processes Related to Suitability for Government Employee, Fitness for Contractor Employees and Eligibility for Access to Classified National Security Information, Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The 5 CFR 32 Part 157 in concert with DoD Manual 1000.13, Vol 1, implements the Federal Standards.
APPLICABILITY
This text applies to all DoD sponsored individuals who require CAC eligibility (or login and P/W if acceptable per contract) for: Physical access to DoD facilities or non-DoD facilities on behalf of DoD; Logical access to information systems (whether on site or remotely); or remote access to DoD networks that use only the CAC logon for user authentication, or access to sensitive and protected information. This applies to the Office of the Secretary of Defense, the Military Departments, the Office of the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Combatant Commands, the Office of the Inspector General of the DoD, the Defense Agencies, the DoD Field Activities and all other organizational entities within the DoD (hereinafter referred to collectively as the "DoD Components").
Each contractor employee providing services at a Navy Command under this contract is required to obtain a Department of Defense Common Access Card (DoD CAC). Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.
ACCESS TO FEDERAL FACILITIES
Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Command’s Security Manager upon arrival to the Command and shall out-process prior to their departure at the completion of the individual’s performance under the contract.
START-UP PERIOD
All contractor resource onboarding documents must be submitted via the prime contractor. The prime contractor shall make all necessary preparations to assume full responsibility for productive performance of the performance start date.
Definition of “productive”:
a. Visit Authorization Request (VAR)
b. Contractor Information Sheet (CIS)
c. Completed EQIP (Electronic Investigation)
d. All contractor resource(s) must have an active JPAS profile.
e. Common Access Card (CAC)
Note (1): Invoicing by the contractor will begin as of the commencement of the performance period of services and no reimbrusement will be paid by the government for efforts expended during the start-up period.
Note (2): Foreign Nationals are not allowed access to the functional/system side of Enterprise Resource Planning
(ERP).
ACCESS TO DOD INFORMATION TECHNOLOGY ( IT) SYSTEMS
In accordance with (IAW) Secretary of the Navy (SECNAV) M-5510.30, contractor employees who require access to DoN or DoD networks are categorized as IT-I, IT-II, or IT-III. The IT-II level, defined in detail in SECNAV M- 5510.30, includes positions which require access to sensitive information. Sensitive information includes information protected under the Privacy Act, to include Protected Health Information (PHI). All contractor employees under this contract who require access to Privacy Act protected information are therefore categorized no lower than IT-II. IT Levels are determined by the requiring activity’s Command Information System Security Manager (ISSM)/Information Assurance Manager (IAM).
Contractor employees requiring privileged or IT-I level access, (when specified by the terms of the contract) require a Single Scope Background Investigation (SSBI) or T5 or T5R equivalent investigation , which is a higher level investigation than the National Agency Check with Law and Credit (NACLC)/T3/T3R described below. Due to the privileged system access, an investigation suitable for High Risk national security positions is required. Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance Technical Level 1, and must be trained and certified on the Operating System or Computing Environment they are required to maintain.
Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee’s duties, such employees shall in-process with the Navy Command’s CSM and ISSM/IAM upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual’s performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-N; therefore, the government employee with knowledge of the system/network access required or the COR shall sign the SAAR-N as the “supervisor”.
The SAAR-N shall be forwarded to the Command’s Security Manager at least 30 days prior to the individual’s start date. Failure to provide the required documentation at least 30 days prior to the individual’s start date may result in delaying the individual’s start date.
When required to maintain access to required IT systems or networks, the contractor shall ensure that all employees requiring access complete annual Cyber Awareness training, and maintain a current requisite background investigation. The Contractor’s Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.
INTERIM ACCESS
The Command's Security Manager may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.
DENIAL OR TERMINATION OF ACCESS
The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.
CONTRACTOR’S SECURITY REPRESENTATIVE
The contractor shall designate an employee to serve as the Contractor’s Security Representative. Within three work days after contract award, the contractor shall provide to the requiring activity’s Security Manager and the Contracting Officer, in writing, the name, title, address and phone number for the Contractor’s Security Representative. The Contractor’s Security Representative shall be the primary point of contact on any security matter. The Contractor’s Security Representative shall not be replaced or removed without prior notice to the Contracting Officer and Command Security Manager.
BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR
CONTRACTORS ASSIGNED TO NATIONAL SECURITY POSITIONS OR PERFORMING SENSITIVE
DUTIES
Navy security policy requires that all positions be given a sensitivity value based on level of risk factors to ensure appropriate protective measures are applied. Contractor employees under this contract are recognized as Non- Critical Sensitive [ADP/IT-II] positions when the contract scope of work require physical access to a federally controlled base, facility or activity and/or requiring access to a DoD computer/network, to perform unclassified sensitive duties. This designation is also applied to contractor employees who access Privacy Act and Protected Health Information (PHI), provide support associated with fiduciary duties, or perform duties that have been identified as National Security Positions. At a minimum, each contractor employee must be a US citizen and have a favorably completed NACLC or T3 or T3R equivalent investigation to obtain a favorable determination for assignment to a non-critical sensitive or IT-II position. The investigation consists of a standard NAC and a FBI fingerprint check plus law enforcement checks and credit check. Each contractor employee filling a non-critical sensitive or IT-II position is required to complete:
SF-86 Questionnaire for National Security Positions (or equivalent OPM investigative product) Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission) Original Signed Release Statements
Failure to provide the required documentation at least 30 days prior to the individual’s start date shall result in delaying the individual’s start date. Background investigations shall be reinitiated as required to ensure investigations remain current (not older than 10 years) throughout the contract performance period. The Contractor’s Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.
Regardless of their duties or IT access requirements ALL contractor employees shall in-process with the CSM upon arrival to the command and shall out-process prior to their departure at the completion of the individual’s performance under the contract. Employees requiring IT access shall also check-in and check-out with the Navy Command’s ISSM/IAM. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The SAAR-N shall be forwarded to the Navy Command’s Security Manager at least 30 days prior to the individual’s start date. Failure to provide the required documentation at least 30 days prior to the individual’s start date shall result in delaying the individual’s start date.
The contractor shall ensure that each contract employee requiring access to IT systems or networks complete annual Cyber Awareness training, and maintain a current requisite background investigation. Contractor employees shall accurately complete the required investigative forms prior to submission to the Command Security Manager. The Command’s Security Manager will review the submitted documentation for completeness prior to submitting it to the Office of Personnel Management (OPM); Potential suitability or security issues identified may render the contractor employee ineligible for the assignment. An unfavorable determination is final (subject to SF-86 appeal procedures) and such a determination does not relieve the contractor from meeting any contractual obligation under the contract. The Command’s Security Manager will forward the required forms to OPM for processing. Once the investigation is complete, the results will be forwarded by OPM to the DoD Central Adjudication Facility (CAF) for a determination.
If the contractor employee already possesses a current favorably adjudicated investigation, the contractor shall submit a Visit Authorization Request (VAR) via…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .