2.04 RFQ N6883623Q0068.pdf

SEE ADDENDUM

(No Collect Calls)

N6883623Q0068 22-Mar-2023

b. TELEPHONE NUMBER

904-542-0411

8. OFFER DUE DATE/LOCAL TIME

01:00 PM 05 Apr 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N688369. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JUSTIN A. WILLIAMSON

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

NAVSUP FLC JACKSONVILLE CONTRACTS DIV

JUSTIN WILLIAMSON

110 YORKTOWN AVE, 3RD FLOOR NAS

JACKSONVILLE FL 32212-0097

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N44466 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

N44466 TRIDENT REFIT FACILITY

JEFFREY WATKINS

990 USS THOMAS JEFFERSON DRIVE

KINGS BAY GA 31547

TEL: (912) 573-5929 FAX:

904-542-1095FAX:

TEL: 904-452-8351 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,000

NAICS:

325510

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF184

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N6883623Q0068

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES ESTIMATED

QUANTITY

UNIT UNIT PRICE ESTIMATED AMOUNT

ULTRA HIGH SOLIDS EPOXY

FFP

ULTRA HIGH SOLIDS EPOXY MIL-PRF-23236D, TYPE VII, CLASSES 9/18,

GRADE C, QPL 23236

a. TITLE, NUMBER AND DATE - COATING SYSTEMS FOR SHIP

STRUCTURES, MIL-PRF-23236D, DATED 15 SEPTEMBER 2009, QPL-23236

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type VII Class 9/18, Grade C,

c. TOXICITY: The coating components and mixed coating shall have no adverse effect on the health of personnel when used for its intended purpose in accordance with the manufacturer’s instructions.

d. PACKAGING: Paints should be packaged in cans or kits, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallon Catalyst Note all parts must be from the same lot and batch. A copy of the SDS and Company Product Data Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined Parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-inspection insert date 2 years after date of manufacture.

f. Items shall be stored and transported as required by the Description of Supply.

ESTIMATED

NET AMT

UNIT UNIT PRICE ESTIMATED AMOUNT

0001AA 20 Kit

ULTRA HIGH SOLID EPOXY WHITE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236. 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLON COMPONENT B, OAP CLEAR, CATALYST

FOB: Destination

SIGNAL CODE: A

PSC CD: 8010

UNIT UNIT PRICE ESTIMATED AMOUNT

0001AB 10 Kit

ULTRA HIGH SOLID EPOXY BLUE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: BLUE, MUST BE CERTIFIED

TO MIL-PRF-23236. 5 GALLONS COMPONENT A, BLUE, BASE AND 5

GALLON COMPONENT B, OAP CLEAR, CATALYST.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

ULTRA HIGH SOLIDS EPOXY

FFP

ULTRA-HIGH SOLIDS EPOXY MIL-PRF-23236D, TYPE VII, CLASSES 5, 7,

17, 5/18, 7/18, 13/18, GRADE C, QPL 23236

a. TITLE, NUMBER AND DATE: COATING SYSTEMS FOR SHIP

STRUCTURES, MIL-PRF-23236D, DATED 15 SEPTEMBER 2009, QPL-23236

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type VII Classes 5, 7, 17, 5/18, 7/18, 13/18, Grade C,

c. TOXICITY: The coating components and mixed coating shall have no adverse effect on the health of personnel when used for its intended purpose in accordance with the manufacturer’s instructions.

d. PACKAGING: Paints should be packaged in cans, kits or dual component cartridges, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallons Catalyst cartridges should be package in 300ML X 300ML dual component cartridges. Note all parts must be from the same lot and batch. A copy of the MSDS and Company Product Data/Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined Parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-

UNIT UNIT PRICE ESTIMATED AMOUNT

0002AA 25 Kit

ULTRA HIGH SOLID EPOXY WHITE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLONS COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0002AB 90 Kit

ULTRA HIGH SOLID EPOXY OAP BLUE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: OAP BLUE, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, OAP BLUE,

BASE AND 5 GALLONS COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0002AC 50 Kit

ULTRA HIGH SOLID EPOXY LIGHT GRAY

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: LIGHT GRAY, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLONS COMPONENT B, LIGHT GRAY, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0002AD 20 Can

ULTRA HIGH SOLID EPOXY CLEAR

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: CLEAR, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT B, CLEAR,

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0002AE 600 Cartridge

ULTRA HIGH SOLIDS EPOXY WHITE

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, WHITE, BASE AND 300ML

COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0002AF 1,800 Cartridge

ULTRA HIGH SOLIDS EPOXY OAP BLUE

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: OAP BLUE, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, OAP BLUE, BASE AND 300ML

COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0002AG 800 Cartridge

ULTRA HIGH SOLID LIGHT GRAY

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: LIGHT GRAY, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, WHITE, BASE AND 300ML

COMPONENT B, LIGHT GRAY, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

ANTICORROSIVE COATING

FFP

MIL-DTL-24441D(SH), TYPE III AND IV, QPL 24441

a. TITLE, NUMBER AND DATE: PAINT, EPOXY-POLYAMIDE, GENERAL

SPECIFICATIONS FOR, MIL-DTL-24441D(SH) 27 AUGUST 2009, QPL-24441

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type III and Type IV

c. TOXICITY: not applicable

d. PACKAGING: Paints should be packaged in cans, kits or dual component cartridges, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallons Catalyst, Cartridges should be packaged in 300ML X 300ML dual component cartridges.

Note all parts must be from the same lot and batch. A copy of the MSDS and Company Product Data/Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-inspection insert date 4 years after date of manufacture.

HAZARDOUS WARNINGS: Individual containers should have the following marking: CAUTION: This paint contains volatile solvents, with probable hazardous vapors. Use with adequate ventilation. Avoid prolonged breathing of vapors or spray mists. The solvents are highly flammable, avoid open flame and smoking.

Unit containers should be marked: This product is asbestos, lead, Chromium, cadmium free.

Type III containers should also be marked: This product is free of volatile organic hazardous air pollutants VOHAPs/HAPs.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AA 175 Kit

F150 TYPE IV GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE IV, FORMULA 150, 5 GALLONS BASE AND 5

GALLONS GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AB 125 Kit

F151 TYPE IV HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 151, 5 GALLONS BASE AND 5

GALLONS HAZE GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AC 120 Kit

F152 TYPE IV WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE IV, FORMULA 152, 5 GALLONS BASE AND 5 GALLONS

WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AD 220 Kit

F153 TYPE IV DARK GRAY

FFP

EPOXY COATING, COLOR: DARK GRAY-F.153, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 153, 5 GALLONS BASE AND 5

GALLONS DARK GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AE 800 Cartridge

F150 TYPE IV GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE IV, FORMULA 150, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AF 800 Cartridge

F151 TYPE IV HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 151, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML HAZE GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AG 504 Cartridge

F152 TYPE IV WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE IV, FORMULA 152, DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML BASE AND 300ML WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AH 800 Cartridge

F153 TYPE IV DARK GREY

FFP

EPOXY COATING, COLOR: DARK GRAY-F.153, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 153, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML DARK GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AJ 60 Kit

F150 TYPE III GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE III, FORMULA 150, 5 GALLONS BASE AND 5

GALLONS GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AK 60 Kit

F151 TYPE III HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE III, FORMULA 151, 5 GALLONS BASE AND 5

GALLONS HAVE GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AL 60 Kit

F152 TYPE III WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE III, FORMULA 152, 5 GALLONS BASE AND 5 GALLONS

WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AM 144 Cartridge

F150 TYPE III GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE III, FORMULA 150, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AN 144 Cartridge

F151 TYPE III HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE III, FORMULA 151, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML HAZE GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

0003AP 144 Cartridge

F152 TYPE III WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE III, FORMULA 152, DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML BASE AND 300ML WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

ANTIFOULING COATING

FFP

ANTIFOULING COATING, MIL-PRF-24647D(SH), TYPE II, CLASS 1,

GRADE B, APPL. 1, 2, 3, 4, QPL 24647

a. TITLE, NUMBER AND DATE: PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL, MIL-PRF-24647E NOTICE 1, 10 JUNE 2018,

QPL 24647 DATE 15-NOV-2022

b. ANTIFOULING PAINT: Type II, Class 1, Grade B, Application 1, 2, 3, 4.

c. TOXICITY- The paint shall contain no detectable asbestos, asbestos from pigments, benzene, toluene, chlorinated solvent, hydrolysable chlorine derivates, coal tar or coal tar derivatives, try-butyl tin compounds, or any ACGIH carcinogenic or ACGIH suspected carcinogenic compounds.

d. REQUIRED MARKING – HAZARDOUS WARNINGS -

- Marking should include bar codes.

(a) Labels should be in accordance with 29 CFR Parts 1910, 1915, 1917, 1918, 1926, and 1928, as well as PPP-P-1892.

(b) All individual containers should have the following markings: CAUTION: This paint contains volatile solvents, with probable hazardous vapors. Use with adequate ventilation. Avoid prolonged breathing of vapors or spray mists. The solvents are highly flammable, avoid open flame and smoking.

(c) Each component container, shipping container, and palletized load shall be marked with the appropriate hazardous symbol.

(d) Unit containers should be marked: This product is asbestos, lead, chromium, cadmium free, except for possible trace levels.

e. SHELF LIFE- Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-inspection insert date 2 years after date of manufacture.

f. LEVEL OF PACKAGING REQUIRED: Paints should be packaged in 5 Gallon cans.

g. REQUIREMENTS FOR ASTM F718: The manufacturer shall provide written directions on each container for the mixing and applying of the paint supplied and this direction shall include all information necessary to comply with the OSHA Hazard Communications ACT and FED-STD-313.

h. Items shall be stored and transported as required by the Description of Supply.

UNIT UNIT PRICE ESTIMATED AMOUNT

0004AA 300 Can

ANTIFOULING PAINT RED

FFP

ANTI-FOULING COATING, COLOR: RED, MUST BE CERTIFIED TO MIL-

PRF-24647, 5 GL PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

0004AB 300 Can

ANTIFOULING PAINT BLACK

FFP

ANTI-FOULING COATING, COLOR: BLACK, MUST BE CERTIFIED TO

MIL-PRF-24647, 5 GL PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

ENAMEL INTERIOR

FFP

ENAMEL, INTERIOR, NON-FLAMING (DRY), COATING MIL-DTL-24607B

a. TITLE, NUMBER AND DATE: ENAMEL, INTERIOR, NONFLAMING

(DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS, MIL-DTL-24607B

W/AMENDMENT 2, 10 SEPTEMBER 2013

b. COLOR: 20109, 22144, 22203, 24585, 27880, 26307, 20460

c. TOXICITY: n/a

d. REQUIRED MARKINGS: n/a

e. OFF-GASSING CONFORMANCE: The enamel should be certified for and assigned a usage category of either “PERMITTED” or “LIMITED” in accordance with NAVSEA S9510-AB-ATM-010 Chapter Titled “MATERIAL CONTROL

PROGRAM”.

f. SHELF LIFE MARKING: n/a

g. OSHA REQUIREMENTS: MSDS and ASTM F718 Data Sheets are required with each shipment.

h. LEVEL OF PACKAGING REQUIRED: The unit of procurement should be in One Gallon cans.

i. Items shall be stored and transported as required by the Description of Supply.

UNIT UNIT PRICE ESTIMATED AMOUNT

0005AA 120 Can

ENAMEL BRICK RED

FFP

BRICK RED ENAMEL, COLOR NUMBER: 20109, MUST BE CERTIFIED TO

MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

0005AB 120 Can

ENAMEL TILE RED

FFP

TILE RED ENAMEL, COLOR NUMBER: 22144, MUST BE CERTIFIED TO

MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

0005AC 120 Can

ENAMEL BURNT ORANGE

FFP

BURNT ORANGE ENAMEL, COLOR NUMBER: 22203, MUST BE

CERTIFIED TO MIL-DTL-24607, ONE GALLON CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

0005AD 380 Can

ENAMEL PASTEL GREEN

FFP

PASTEL GREEN ENAMEL, COLOR NUMBER: 24585, MUST BE CERTIFIED

TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

0005AE 380 Can

ENAMEL SOFT WHITE

FFP

SOFT WHITE ENAMEL, COLOR NUMBER: 27880, MUST BE CERTIFIED

TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

0005AF 480 Can

ENAMEL EQUIP GRAY

FFP

EQUIPMENT GRAY ENAMELBULKHD GRAY, COLOR NUMBER: 26307,

MUST BE CERTIFIED TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

0005AG 480 Can

ENAMEL MUSHROOM

FFP

MUSHROOM, ENAMEL,TAN, COLOR NUMBER: 20460, MUST BE

CERTIFIED TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

NONSKID COATING SYSTEM

FFP

NON-SKID COATING, MIL-PRF-24667C

a. TITLE, NUMBER AND DATE: COATING SYSTEM, NON-SKID, FOR

ROLL, SPRAY, OR SELF-ADHERING APPLICATION, MIL-PRF-24667C, 22

MAY 2008

b. TYPE: I, COMPOSITION: G

c. SPECIFIC ISSUE OR DOCUMENTATION: not applicale

d. COLOR REQUIRED: Black to match Color SHIP 37038 OF FED-STD-595

e. TOXICITY: not applicable

f. SHELF LIFE- Each unit container, intermediate container where applicable and shipping container shall be marked as follows: This coating has a one Year nonextendable shelf-life and shall not be used after insert the month and year which are one year later than the date of manufacture.

g. LEVEL OF PACKAGING REQUIRED: Non-skid coating system should be packaged in 5 Gallon kits.

UNIT UNIT PRICE ESTIMATED AMOUNT

0006AA 60 Kit

COATING NON-SKID

FFP

NON-SKID, COATING, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, FED-STD-595 COLOR CHIP 37038 BLACK, 5 GALLONS

PER KIT.

UNIT UNIT PRICE ESTIMATED AMOUNT

0006AB 60 Can

PRIMER NON-SKID

FFP

PRIMER NON SKID, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, COLOR: GRAY, 1 GALLON PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

0007 50 Drum

CLEANING SOLVENT

FFP

CLEANING SOLVENT FOR TYPE VII, CLASSES 5, 7, 17, 5/18, 7/18, 13/18,

GRADE C, ULTRA-HIGH SOLIDS EPOXY PAINTS, 55 GL PER DRUM.

ITEMS SHALL BE STORED AND TRANSPORTED AS STATED IN THE

DESCRIPTION OF SUPPLY.

UNIT UNIT PRICE ESTIMATED AMOUNT

0008 24 Can

COATING MINERAL SPIRITS

FFP

MINERAL SPIRITS, THINNER FOR ABLATIVE PAINTS, MUST BE

CERTIFIED TO A-A-2904 TYPE I, 5 GALLONS PER CAN. ITEMS SHALL BE

STORED AND TRANSPORTED AS STATED IN THE DESCRIPTION OF

SUPPLY.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ULTRA HIGH SOLIDS EPOXY

FFP

ULTRA HIGH SOLIDS EPOXY MIL-PRF-23236D, TYPE VII, CLASSES 9/18,

GRADE C, QPL 23236

a. TITLE, NUMBER AND DATE - COATING SYSTEMS FOR SHIP

STRUCTURES, MIL-PRF-23236D, DATED 15 SEPTEMBER 2009, QPL-23236

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type VII Class 9/18, Grade C,

c. TOXICITY: The coating components and mixed coating shall have no adverse effect on the health of personnel when used for its intended purpose in accordance with the manufacturer’s instructions.

d. PACKAGING: Paints should be packaged in cans or kits, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallon Catalyst Note all parts must be from the same lot and batch. A copy of the SDS and Company Product Data Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined Parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-

UNIT UNIT PRICE ESTIMATED AMOUNT

1001AA 20 Kit

OPTION ULTRA HIGH SOLID EPOXY WHITE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236. 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLON COMPONENT B, OAP CLEAR, CATALYST

UNIT UNIT PRICE ESTIMATED AMOUNT

1001AB 10 Kit

OPTION ULTRA HIGH SOLID EPOXY BLUE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: BLUE, MUST BE CERTIFIED

TO MIL-PRF-23236. 5 GALLONS COMPONENT A, BLUE, BASE AND 5

GALLON COMPONENT B, OAP CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ULTRA HIGH SOLIDS EPOXY

FFP

ULTRA-HIGH SOLIDS EPOXY MIL-PRF-23236D, TYPE VII, CLASSES 5, 7,

17, 5/18, 7/18, 13/18, GRADE C, QPL 23236

a. TITLE, NUMBER AND DATE: COATING SYSTEMS FOR SHIP

STRUCTURES, MIL-PRF-23236D, DATED 15 SEPTEMBER 2009, QPL-23236

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type VII Classes 5, 7, 17, 5/18, 7/18, 13/18, Grade C,

c. TOXICITY: The coating components and mixed coating shall have no adverse effect on the health of personnel when used for its intended purpose in accordance with the manufacturer’s instructions.

d. PACKAGING: Paints should be packaged in cans, kits or dual component cartridges, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallons Catalyst cartridges should be package in 300ML X 300ML dual component cartridges. Note all parts must be from the same lot and batch. A copy of the MSDS and Company Product Data/Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined Parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-

UNIT UNIT PRICE ESTIMATED AMOUNT

1002AA 25 Kit

OPTION ULTRA HIGH SOLID EPOXY WHITE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLONS COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1002AB 90 Kit

OPTION ULTRA HIGH SOLID EPOXY OAP BLUE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: OAP BLUE, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, OAP BLUE,

BASE AND 5 GALLONS COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1002AC 50 Kit

OPTION ULTRA HIGH SOLID EPOXY LIGHT GRAY

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: LIGHT GRAY, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLONS COMPONENT B, LIGHT GRAY, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1002AD 20 Can

OPTION ULTRA HIGH SOLID EPOXY CLEAR

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: CLEAR, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT B, CLEAR,

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1002AE 600 Cartridge

OPTION ULTRA HIGH SOLIDS EPOXY WHITE

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, WHITE, BASE AND 300ML

COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1002AF 1,800 Cartridge

OPTION ULTRA HIGH SOLIDS EPOXY OAP BLUE

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: OAP BLUE, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, OAP BLUE, BASE AND 300ML

COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1002AG 800 Cartridge

OPTION ULTRA HIGH SOLID LIGHT GRAY

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: LIGHT GRAY, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, WHITE, BASE AND 300ML

COMPONENT B, LIGHT GRAY, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ANTICORROSIVE COATING

FFP

MIL-DTL-24441D(SH), TYPE III AND IV, QPL 24441

a. TITLE, NUMBER AND DATE: PAINT, EPOXY-POLYAMIDE, GENERAL

SPECIFICATIONS FOR, MIL-DTL-24441D(SH) 27 AUGUST 2009, QPL-24441

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type III and Type IV

c. TOXICITY: not applicable

d. PACKAGING: Paints should be packaged in cans, kits or dual component cartridges, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallons Catalyst, Cartridges should be packaged in 300ML X 300ML dual component cartridges.

Note all parts must be from the same lot and batch. A copy of the MSDS and Company Product Data/Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-inspection insert date 4 years after date of manufacture.

HAZARDOUS WARNINGS: Individual containers should have the following marking: CAUTION: This paint contains volatile solvents, with probable hazardous vapors. Use with adequate ventilation. Avoid prolonged breathing of vapors or spray mists. The solvents are highly flammable, avoid open flame and smoking.

Unit containers should be marked: This product is asbestos, lead, Chromium, cadmium free.

Type III containers should also be marked: This product is free of volatile organic

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AA 175 Kit

OPTION F150 TYPE IV GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE IV, FORMULA 150, 5 GALLONS BASE AND 5

GALLONS GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AB 125 Kit

OPTION F151 TYPE IV HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 151, 5 GALLONS BASE AND 5

GALLONS HAZE GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AC 120 Kit

OPTION F152 TYPE IV WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE IV, FORMULA 152, 5 GALLONS BASE AND 5 GALLONS

WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AD 220 Kit

OPTION F153 TYPE IV DARK GRAY

FFP

EPOXY COATING, COLOR: DARK GRAY-F.153, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 153, 5 GALLONS BASE AND 5

GALLONS DARK GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AE 800 Cartridge

OPTION F150 TYPE IV GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE IV, FORMULA 150, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AF 800 Cartridge

OPTION F151 TYPE IV HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 151, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML HAZE GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AG 504 Cartridge

OPTION F152 TYPE IV WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE IV, FORMULA 152, DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML BASE AND 300ML WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AH 800 Cartridge

OPTION F153 TYPE IV DARK GREY

FFP

EPOXY COATING, COLOR: DARK GRAY-F.153, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 153, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML DARK GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AJ 60 Kit

OPTION F150 TYPE III GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE III, FORMULA 150, 5 GALLONS BASE AND 5

GALLONS GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AK 60 Kit

OPTION F151 TYPE III HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE III, FORMULA 151, 5 GALLONS BASE AND 5

GALLONS HAVE GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AL 60 Kit

OPTION F152 TYPE III WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE III, FORMULA 152, 5 GALLONS BASE AND 5 GALLONS

WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AM 144 Cartridge

OPTION F150 TYPE III GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE III, FORMULA 150, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AN 144 Cartridge

OPTION F151 TYPE III HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE III, FORMULA 151, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML HAZE GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003AP 144 Cartridge

OPTION F152 TYPE III WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE III, FORMULA 152, DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML BASE AND 300ML WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ANTIFOULING COATING

FFP

ANTIFOULING COATING, MIL-PRF-24647D(SH), TYPE II, CLASS 1,

GRADE B, APPL. 1, 2, 3, 4, QPL 24647

a. TITLE, NUMBER AND DATE: PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL, MIL-PRF-24647E NOTICE 1, 10 JUNE 2018,

QPL 24647 DATE 15-NOV-2022

b. ANTIFOULING PAINT: Type II, Class 1, Grade B, Application 1, 2, 3, 4.

c. TOXICITY- The paint shall contain no detectable asbestos, asbestos from pigments, benzene, toluene, chlorinated solvent, hydrolysable chlorine derivates, coal tar or coal tar derivatives, try-butyl tin compounds, or any ACGIH carcinogenic or ACGIH suspected carcinogenic compounds.

d. REQUIRED MARKING – HAZARDOUS WARNINGS -

- Marking should include bar codes.

(a) Labels should be in accordance with 29 CFR Parts 1910, 1915, 1917, 1918, 1926, and 1928, as well as PPP-P-1892.

(b) All individual containers should have the following markings: CAUTION: This paint contains volatile solvents, with probable hazardous vapors. Use with adequate ventilation. Avoid prolonged breathing of vapors or spray mists. The solvents are highly flammable, avoid open flame and smoking.

(c) Each component container, shipping container, and palletized load shall be marked with the appropriate hazardous symbol.

(d) Unit containers should be marked: This product is asbestos, lead, chromium, cadmium free, except for possible trace levels.

e. SHELF LIFE- Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-inspection insert date 2 years after date of manufacture.

f. LEVEL OF PACKAGING REQUIRED: Paints should be packaged in 5 Gallon cans.

g. REQUIREMENTS FOR ASTM F718: The manufacturer shall provide written directions on each container for the mixing and applying of the paint supplied and this direction shall include all information necessary to comply with the OSHA

UNIT UNIT PRICE ESTIMATED AMOUNT

1004AA 300 Can

OPTION ANTIFOULING PAINT RED

FFP

ANTI-FOULING COATING, COLOR: RED, MUST BE CERTIFIED TO MIL-

PRF-24647, 5 GL PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

1004AB 300 Can

OPTION ANTIFOULING PAINT BLACK

FFP

ANTI-FOULING COATING, COLOR: BLACK, MUST BE CERTIFIED TO

MIL-PRF-24647, 5 GL PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ENAMEL INTERIOR

FFP

ENAMEL, INTERIOR, NON-FLAMING (DRY), COATING MIL-DTL-24607B

a. TITLE, NUMBER AND DATE: ENAMEL, INTERIOR, NONFLAMING

(DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS, MIL-DTL-24607B

W/AMENDMENT 2, 10 SEPTEMBER 2013

b. COLOR: 20109, 22144, 22203, 24585, 27880, 26307, 20460

c. TOXICITY: n/a

d. REQUIRED MARKINGS: n/a

e. OFF-GASSING CONFORMANCE: The enamel should be certified for and assigned a usage category of either “PERMITTED” or “LIMITED” in accordance with NAVSEA S9510-AB-ATM-010 Chapter Titled “MATERIAL CONTROL

PROGRAM”.

f. SHELF LIFE MARKING: n/a

g. OSHA REQUIREMENTS: MSDS and ASTM F718 Data Sheets are required with each shipment.

h. LEVEL OF PACKAGING REQUIRED: The unit of procurement should be in

UNIT UNIT PRICE ESTIMATED AMOUNT

1005AA 120 Can

OPTION ENAMEL BRICK RED

FFP

BRICK RED ENAMEL, COLOR NUMBER: 20109, MUST BE CERTIFIED TO

MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

1005AB 120 Can

OPTION ENAMEL TILE RED

FFP

TILE RED ENAMEL, COLOR NUMBER: 22144, MUST BE CERTIFIED TO

MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

1005AC 120 Can

OPTION ENAMEL BURNT ORANGE

FFP

BURNT ORANGE ENAMEL, COLOR NUMBER: 22203, MUST BE

CERTIFIED TO MIL-DTL-24607, ONE GALLON CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

1005AD 380 Can

OPTION ENAMEL PASTEL GREEN

FFP

PASTEL GREEN ENAMEL, COLOR NUMBER: 24585, MUST BE CERTIFIED

TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

1005AE 380 Can

OPTION ENAMEL SOFT WHITE

FFP

SOFT WHITE ENAMEL, COLOR NUMBER: 27880, MUST BE CERTIFIED

TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

1005AF 480 Can

OPTION ENAMEL EQUIP GRAY

FFP

EQUIPMENT GRAY ENAMELBULKHD GRAY, COLOR NUMBER: 26307,

MUST BE CERTIFIED TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

1005AG 480 Can

OPTION ENAMEL MUSHROOM

FFP

MUSHROOM, ENAMEL,TAN, COLOR NUMBER: 20460, MUST BE

CERTIFIED TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION NONSKID COATING SYSTEM

FFP

NON-SKID COATING, MIL-PRF-24667C

a. TITLE, NUMBER AND DATE: COATING SYSTEM, NON-SKID, FOR

ROLL, SPRAY, OR SELF-ADHERING APPLICATION, MIL-PRF-24667C, 22

MAY 2008

b. TYPE: I, COMPOSITION: G

c. SPECIFIC ISSUE OR DOCUMENTATION: not applicale

d. COLOR REQUIRED: Black to match Color SHIP 37038 OF FED-STD-595

e. TOXICITY: not applicable

f. SHELF LIFE- Each unit container, intermediate container where applicable and shipping container shall be marked as follows: This coating has a one Year nonextendable shelf-life and shall not be used after insert the month and year which are one year later than the date of manufacture.

g. LEVEL OF PACKAGING REQUIRED: Non-skid coating system should be

UNIT UNIT PRICE ESTIMATED AMOUNT

1006AA 60 Kit

OPTION COATING NON-SKID

FFP

NON-SKID, COATING, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, FED-STD-595 COLOR CHIP 37038 BLACK, 5 GALLONS

PER KIT.

UNIT UNIT PRICE ESTIMATED AMOUNT

1006AB 60 Can

OPTION PRIMER NON-SKID

FFP

PRIMER NON SKID, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, COLOR: GRAY, 1 GALLON PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

1006AC 60 Kit

OPTION COATING NON-SKID

FFP

NON-SKID, COATING, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, FED-STD-595 COLOR CHIP 37038 BLACK, 5 GALLONS

PER KIT.

UNIT UNIT PRICE ESTIMATED AMOUNT

1007 50 Drum

OPTION CLEANING SOLVENT

FFP

CLEANING SOLVENT FOR TYPE VII, CLASSES 5, 7, 17, 5/18, 7/18, 13/18,

GRADE C, ULTRA-HIGH SOLIDS EPOXY PAINTS, 55 GL PER DRUM.

ITEMS SHALL BE STORED AND TRANSPORTED AS STATED IN THE

DESCRIPTION OF SUPPLY.

UNIT UNIT PRICE ESTIMATED AMOUNT

1008 24 Can

OPTION COATING MINERAL SPIRITS

FFP

MINERAL SPIRITS, THINNER FOR ABLATIVE PAINTS, MUST BE

CERTIFIED TO A-A-2904 TYPE I, 5 GALLONS PER CAN. ITEMS SHALL BE

STORED AND TRANSPORTED AS STATED IN THE DESCRIPTION OF

SUPPLY.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ULTRA HIGH SOLIDS EPOXY

FFP

ULTRA HIGH SOLIDS EPOXY MIL-PRF-23236D, TYPE VII, CLASSES 9/18,

GRADE C, QPL 23236

a. TITLE, NUMBER AND DATE - COATING SYSTEMS FOR SHIP

STRUCTURES, MIL-PRF-23236D, DATED 15 SEPTEMBER 2009, QPL-23236

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type VII Class 9/18, Grade C,

c. TOXICITY: The coating components and mixed coating shall have no adverse effect on the health of personnel when used for its intended purpose in accordance with the manufacturer’s instructions.

d. PACKAGING: Paints should be packaged in cans or kits, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallon Catalyst Note all parts must be from the same lot and batch. A copy of the SDS and Company Product Data Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined Parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-

UNIT UNIT PRICE ESTIMATED AMOUNT

2001AA 20 Kit

OPTION ULTRA HIGH SOLID EPOXY WHITE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236. 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLON COMPONENT B, OAP CLEAR, CATALYST

UNIT UNIT PRICE ESTIMATED AMOUNT

2001AB 10 Kit

OPTION ULTRA HIGH SOLID EPOXY BLUE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: BLUE, MUST BE CERTIFIED

TO MIL-PRF-23236. 5 GALLONS COMPONENT A, BLUE, BASE AND 5

GALLON COMPONENT B, OAP CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ULTRA HIGH SOLIDS EPOXY

FFP

ULTRA-HIGH SOLIDS EPOXY MIL-PRF-23236D, TYPE VII, CLASSES 5, 7,

17, 5/18, 7/18, 13/18, GRADE C, QPL 23236

a. TITLE, NUMBER AND DATE: COATING SYSTEMS FOR SHIP

STRUCTURES, MIL-PRF-23236D, DATED 15 SEPTEMBER 2009, QPL-23236

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type VII Classes 5, 7, 17, 5/18, 7/18, 13/18, Grade C,

c. TOXICITY: The coating components and mixed coating shall have no adverse effect on the health of personnel when used for its intended purpose in accordance with the manufacturer’s instructions.

d. PACKAGING: Paints should be packaged in cans, kits or dual component cartridges, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallons Catalyst cartridges should be package in 300ML X 300ML dual component cartridges. Note all parts must be from the same lot and batch. A copy of the MSDS and Company Product Data/Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined Parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-

UNIT UNIT PRICE ESTIMATED AMOUNT

2002AA 25 Kit

OPTION ULTRA HIGH SOLID EPOXY WHITE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLONS COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2002AB 90 Kit

OPTION ULTRA HIGH SOLID EPOXY OAP BLUE

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: OAP BLUE, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, OAP BLUE,

BASE AND 5 GALLONS COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2002AC 50 Kit

OPTION ULTRA HIGH SOLID EPOXY LIGHT GRAY

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: LIGHT GRAY, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT A, WHITE,

BASE AND 5 GALLONS COMPONENT B, LIGHT GRAY, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2002AD 20 Can

OPTION ULTRA HIGH SOLID EPOXY CLEAR

FFP

ULTRA HIGH SOLID EPOXY PAINT, COLOR: CLEAR, MUST BE

CERTIFIED TO MIL-PRF-23236, 5 GALLONS COMPONENT B, CLEAR,

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2002AE 600 Cartridge

OPTION ULTRA HIGH SOLIDS EPOXY WHITE

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: WHITE, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, WHITE, BASE AND 300ML

COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2002AF 1,800 Cartridge

OPTION ULTRA HIGH SOLIDS EPOXY OAP BLUE

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: OAP BLUE, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, OAP BLUE, BASE AND 300ML

COMPONENT B, CLEAR, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2002AG 800 Cartridge

OPTION ULTRA HIGH SOLID LIGHT GRAY

FFP

ULTRA HIGH SOLIDS EPOXY PAINT, COLOR: LIGHT GRAY, MUST BE

CERTIFIED TO MIL-PRF-23236. DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML COMPONENT A, WHITE, BASE AND 300ML

COMPONENT B, LIGHT GRAY, CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ANTICORROSIVE COATING

FFP

MIL-DTL-24441D(SH), TYPE III AND IV, QPL 24441

a. TITLE, NUMBER AND DATE: PAINT, EPOXY-POLYAMIDE, GENERAL

SPECIFICATIONS FOR, MIL-DTL-24441D(SH) 27 AUGUST 2009, QPL-24441

DATE 15-NOV-2022

b. TYPE, CLASS AND GRADE: Type III and Type IV

c. TOXICITY: not applicable

d. PACKAGING: Paints should be packaged in cans, kits or dual component cartridges, 10 Gallon kits, 1 to 1 ration 5 Gallons Base, 5 Gallons Catalyst, Cartridges should be packaged in 300ML X 300ML dual component cartridges.

Note all parts must be from the same lot and batch. A copy of the MSDS and Company Product Data/Procedure Sheet should be attached to the shipping document for each destination. VOC Certification sheets will be provided by manufacturer for each batch of combined parts A & B for each coat of the coating system.

e. SHELF LIFE MARKING: Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-inspection insert date 4 years after date of manufacture.

HAZARDOUS WARNINGS: Individual containers should have the following marking: CAUTION: This paint contains volatile solvents, with probable hazardous vapors. Use with adequate ventilation. Avoid prolonged breathing of vapors or spray mists. The solvents are highly flammable, avoid open flame and smoking.

Unit containers should be marked: This product is asbestos, lead, Chromium, cadmium free.

Type III containers should also be marked: This product is free of volatile organic

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AA 175 Kit

OPTION F150 TYPE IV GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE IV, FORMULA 150, 5 GALLONS BASE AND 5

GALLONS GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AB 125 Kit

OPTION F151 TYPE IV HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 151, 5 GALLONS BASE AND 5

GALLONS HAZE GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AC 120 Kit

OPTION F152 TYPE IV WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE IV, FORMULA 152, 5 GALLONS BASE AND 5 GALLONS

WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AD 220 Kit

OPTION F153 TYPE IV DARK GRAY

FFP

EPOXY COATING, COLOR: DARK GRAY-F.153, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 153, 5 GALLONS BASE AND 5

GALLONS DARK GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AE 800 Cartridge

OPTION F150 TYPE IV GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE IV, FORMULA 150, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AF 800 Cartridge

OPTION F151 TYPE IV HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 151, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML HAZE GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AG 504 Cartridge

OPTION F152 TYPE IV WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE IV, FORMULA 152, DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML BASE AND 300ML WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AH 800 Cartridge

OPTION F153 TYPE IV DARK GREY

FFP

EPOXY COATING, COLOR: DARK GRAY-F.153, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE IV, FORMULA 153, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML DARK GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AJ 60 Kit

OPTION F150 TYPE III GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE III, FORMULA 150, 5 GALLONS BASE AND 5

GALLONS GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AK 60 Kit

OPTION F151 TYPE III HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE III, FORMULA 151, 5 GALLONS BASE AND 5

GALLONS HAVE GRAY CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AL 60 Kit

OPTION F152 TYPE III WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE III, FORMULA 152, 5 GALLONS BASE AND 5 GALLONS

WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AM 144 Cartridge

OPTION F150 TYPE III GREEN

FFP

EPOXY COATING, COLOR: GREEN PRIMER-F.150, MUST BE CERTIFIED

TO MIL-DTL-24441, TYPE III, FORMULA 150, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML GREEN CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AN 144 Cartridge

OPTION F151 TYPE III HAZE GRAY

FFP

EPOXY COATING, COLOR: HAZE GRAY-F.151, MUST BE CERTIFIED TO

MIL-DTL-24441, TYPE III, FORMULA 151, DUAL COMPONENT

CARTRIDGE SYSTEM, 300ML BASE AND 300ML HAZE GRAY

CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003AP 144 Cartridge

OPTION F152 TYPE III WHITE

FFP

EPOXY COATING, COLOR: WHITE-F.152, MUST BE CERTIFIED TO MIL-

DTL-24441, TYPE III, FORMULA 152, DUAL COMPONENT CARTRIDGE

SYSTEM, 300ML BASE AND 300ML WHITE CATALYST.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ANTIFOULING COATING

FFP

ANTIFOULING COATING, MIL-PRF-24647D(SH), TYPE II, CLASS 1,

GRADE B, APPL. 1, 2, 3, 4, QPL 24647

a. TITLE, NUMBER AND DATE: PAINT SYSTEM, ANTICORROSIVE AND

ANTIFOULING, SHIP HULL, MIL-PRF-24647E NOTICE 1, 10 JUNE 2018,

QPL 24647 DATE 15-NOV-2022

b. ANTIFOULING PAINT: Type II, Class 1, Grade B, Application 1, 2, 3, 4.

c. TOXICITY- The paint shall contain no detectable asbestos, asbestos from pigments, benzene, toluene, chlorinated solvent, hydrolysable chlorine derivates, coal tar or coal tar derivatives, try-butyl tin compounds, or any ACGIH carcinogenic or ACGIH suspected carcinogenic compounds.

d. REQUIRED MARKING – HAZARDOUS WARNINGS -

- Marking should include bar codes.

(a) Labels should be in accordance with 29 CFR Parts 1910, 1915, 1917, 1918, 1926, and 1928, as well as PPP-P-1892.

(b) All individual containers should have the following markings: CAUTION: This paint contains volatile solvents, with probable hazardous vapors. Use with adequate ventilation. Avoid prolonged breathing of vapors or spray mists. The solvents are highly flammable, avoid open flame and smoking.

(c) Each component container, shipping container, and palletized load shall be marked with the appropriate hazardous symbol.

(d) Unit containers should be marked: This product is asbestos, lead, chromium, cadmium free, except for possible trace levels.

e. SHELF LIFE- Each unit container, intermediate container where applicable, and shipping container shall be marked as follows: Date of first re-inspection insert date 2 years after date of manufacture.

f. LEVEL OF PACKAGING REQUIRED: Paints should be packaged in 5 Gallon cans.

g. REQUIREMENTS FOR ASTM F718: The manufacturer shall provide written directions on each container for the mixing and applying of the paint supplied and this direction shall include all information necessary to comply with the OSHA

UNIT UNIT PRICE ESTIMATED AMOUNT

2004AA 300 Can

OPTION ANTIFOULING PAINT RED

FFP

ANTI-FOULING COATING, COLOR: RED, MUST BE CERTIFIED TO MIL-

PRF-24647, 5 GL PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

2004AB 300 Can

OPTION ANTIFOULING PAINT BLACK

FFP

ANTI-FOULING COATING, COLOR: BLACK, MUST BE CERTIFIED TO

MIL-PRF-24647, 5 GL PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION ENAMEL INTERIOR

FFP

ENAMEL, INTERIOR, NON-FLAMING (DRY), COATING MIL-DTL-24607B

a. TITLE, NUMBER AND DATE: ENAMEL, INTERIOR, NONFLAMING

(DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS, MIL-DTL-24607B

W/AMENDMENT 2, 10 SEPTEMBER 2013

b. COLOR: 20109, 22144, 22203, 24585, 27880, 26307, 20460

c. TOXICITY: n/a

d. REQUIRED MARKINGS: n/a

e. OFF-GASSING CONFORMANCE: The enamel should be certified for and assigned a usage category of either “PERMITTED” or “LIMITED” in accordance with NAVSEA S9510-AB-ATM-010 Chapter Titled “MATERIAL CONTROL

PROGRAM”.

f. SHELF LIFE MARKING: n/a

g. OSHA REQUIREMENTS: MSDS and ASTM F718 Data Sheets are required with each shipment.

h. LEVEL OF PACKAGING REQUIRED: The unit of procurement should be in

UNIT UNIT PRICE ESTIMATED AMOUNT

2005AA 120 Can

OPTION ENAMEL BRICK RED

FFP

BRICK RED ENAMEL, COLOR NUMBER: 20109, MUST BE CERTIFIED TO

MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

2005AB 120 Can

OPTION ENAMEL TILE RED

FFP

TILE RED ENAMEL, COLOR NUMBER: 22144, MUST BE CERTIFIED TO

MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

2005AC 120 Can

OPTION ENAMEL BURNT ORANGE

FFP

BURNT ORANGE ENAMEL, COLOR NUMBER: 22203, MUST BE

CERTIFIED TO MIL-DTL-24607, ONE GALLON CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

2005AD 380 Can

OPTION ENAMEL PASTEL GREEN

FFP

PASTEL GREEN ENAMEL, COLOR NUMBER: 24585, MUST BE CERTIFIED

TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

2005AE 380 Can

OPTION ENAMEL SOFT WHITE

FFP

SOFT WHITE ENAMEL, COLOR NUMBER: 27880, MUST BE CERTIFIED

TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

2005AF 480 Can

OPTION ENAMEL EQUIP GRAY

FFP

EQUIPMENT GRAY ENAMELBULKHD GRAY, COLOR NUMBER: 26307,

MUST BE CERTIFIED TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

2005AG 480 Can

OPTION ENAMEL MUSHROOM

FFP

MUSHROOM, ENAMEL,TAN, COLOR NUMBER: 20460, MUST BE

CERTIFIED TO MIL-DTL-24607, ONE GALLON CANS.

UNIT UNIT PRICE ESTIMATED AMOUNT

OPTION NONSKID COATING SYSTEM

FFP

NON-SKID COATING, MIL-PRF-24667C

a. TITLE, NUMBER AND DATE: COATING SYSTEM, NON-SKID, FOR

ROLL, SPRAY, OR SELF-ADHERING APPLICATION, MIL-PRF-24667C, 22

MAY 2008

b. TYPE: I, COMPOSITION: G

c. SPECIFIC ISSUE OR DOCUMENTATION: not applicale

d. COLOR REQUIRED: Black to match Color SHIP 37038 OF FED-STD-595

e. TOXICITY: not applicable

f. SHELF LIFE- Each unit container, intermediate container where applicable and shipping container shall be marked as follows: This coating has a one Year nonextendable shelf-life and shall not be used after insert the month and year which are one year later than the date of manufacture.

g. LEVEL OF PACKAGING REQUIRED: Non-skid coating system should be

UNIT UNIT PRICE ESTIMATED AMOUNT

2006AA 60 Kit

OPTION COATING NON-SKID

FFP

NON-SKID, COATING, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, FED-STD-595 COLOR CHIP 37038 BLACK, 5 GALLONS

PER KIT.

UNIT UNIT PRICE ESTIMATED AMOUNT

2006AB 60 Can

OPTION PRIMER NON-SKID

FFP

PRIMER NON SKID, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, COLOR: GRAY, 1 GALLON PER CAN.

UNIT UNIT PRICE ESTIMATED AMOUNT

2006AC 60 Kit

OPTION COATING NON-SKID

FFP

NON-SKID, COATING, MUST BE CERTIFIED TO MIL-PRF-24667C, TYPE 1,

COMPOSITION G, FED-STD-595 COLOR CHIP 37038 BLACK, 5 GALLONS

PER KIT.

UNIT UNIT PRICE ESTIMATED AMOUNT

2007 50 Drum

OPTION CLEANING SOLVENT

FFP

CLEANING SOLVENT FOR TYPE VII, CLASSES 5, 7, 17, 5/18, 7/18, 13/18,

GRADE C, ULTRA-HIGH SOLIDS EPOXY PAINTS, 55 GL PER DRUM.

ITEMS SHALL BE STORED AND TRANSPORTED AS STATED IN THE

DESCRIPTION OF SUPPLY.

UNIT UNIT PRICE ESTIMATED AMOUNT

2008 24 Can

OPTION COATING MINERAL SPIRITS

FFP

MINERAL SPIRITS, THINNER FOR ABLATIVE PAINTS,…