2.01 RFP SPRMM121RRA93.pdf

PDF 2 MB Posted Feb 14, 2022

Attached to: 5 YEAR INDEFINITE DELIVERY/INDEFINITE QUANTITY (IDIQ) CONTRACT FOR HAND PUMPS IN SUPPORT OF THE GENERAL PURPOSE ELECTRONIC TEST EQUIPMENT (GPETE)
Solicitation number: SPRMM1-21-R-RA93
Issued by: Defense Logistics Agency Land and Maritime

View the file

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

252.204-7001 BE FURNISHED

SECTION A - COVER SHEET

(See Section L of the Table of Contents in

You are cautioned to note the "Certification of Non-Segregated Facilities" in the solicitation. Failure to agree to the certification will render your reply nonresponsive to the terms of solicitations involving awards of contracts exceeding $25,000 which are not exempt from the provisions of the Equal Opportunity clause.

"Fill-ins" are provided on the face and reverse of Standard Form 18 and Parts I and IV of Standard Form 33, or other solicitation documents and Sections of Table of Contents in this solicitation and should be examined for applicability.

See the provision of this solicitation entitled "Late Bids, Modifications of Bids or Withdrawal of Bids" or "Late Proposals, Modifications of Proposals and Withdrawals of Proposals."

When submitting your reply,the envelope used must be plainly marked with the Solicitation Number, as shown above and the date and local time set forth for bid opening or receipt of proposals in the solicitation document.

If NO RESPONSE is to be submitted, detach this sheet from the solicitation, complete the information requested on reverse,fold, affix postage, and mail. NO ENVELOPE IS NECESSARY.

Replies must set forth full, accurate, and complete information as required by this solicitation The penalty for making false statements is prescribed in 18 U.S.C.1001.

(X one).

a. SEALED BID

c. NEGOTIATED (RFQ)

INSTRUCTIONS

NOTE THE AFFIRMATIVE ACTION REQUIREMENT OF THE EQUAL OPPORTUNITY CLAUSE WHICH MAY APPLY TO THE CONTRACT

RESULTING FROM THIS SOLICITATION.

3. ISSUING OFFICE

(including attachments).

4. ITEMS TO BE PURCHASED

5 PROCUREMENT INFORMATION

a. THIS PROCUREMENT IS UNRESTRICTED

b. THIS PROCUREMENT IS A ______% SET-ASIDE FOR ONE OF THE FOLLOWING

1. SOLICITATION NUMBER

INFORMATION TO OFFERORS OR QUOTERS

6. ADDITIONAL INFORMATION

(1) Small Business (2) Labor Surplus Area Concerns (3) Combined Small Business/Labor Area Concerns

DD Form 1707, MAR 89 Previous editions are obsolete.

(Brief description)

(Complete mailing address, including Zip Code)

(X one) this solicitation for details of the set-aside.)

(X and complete as applicable)

461/089

b. NEGOTIATED (RFP)

7. POINT OF CONTACT FOR INFORMATION

a. NAME (Last, First, Middle Initial) b. ADDRESS (Include Zip Code)

c. TELEPHONE NUMBER (Include Area Code and Extension) (NO COLLECT CALLS)

NOTE : IT IS REQUESTED THAT THE INFORMATION REQUIRED BY CLAUSES 52.204-4 AND

NOTE THE CLAUSE 52.232-25 ENTITLED "PROMPT PAYMENT" IN THE SOLICITATION.

NOTE : IT IS THE POLICY OF THE DOD TO MAXIMIZE THE NUMBER OF SMALL AND

DISADVANTAGED (SDB) CONCERNS PARTICIPATING IN DEFENSE PRIME AND SUBCONTRACTS.

IT IS REQUIRED THAT PRIME CONTRACTORS' SUBCONTRACT PLANS, WHEN REQUIRED

BY THE SOLICITATION, REFLECT A SDB GOAL OF 5% OR GREATER .

SPRMM1-21-R-RA93

21034-0030 (LTC* )

DLA MARITIME - MECHANICSBURG

DLR PROCUREMENT OPS DLA-ZI

P. O. BOX 2020, 5450 CARLISLE PIKE

MECHANICSBURG PA 17055-0788

SEE SCHEDULE

* THIS PROCUREMENT IS SET-ASIDE FOR SMALL BUSINESSES

A.E. PUCHALSKY ZIBA11

DLA MARITIME - MECHANICSBURG

(717) 550-3120 MECHANICSBURG PA 17055-0788

KKKKKKKKKKKKKKKKKKKJ

e. OTHER

8. REASONS FOR NO RESPONSE

DD Form 1707 Reverse, MAR 89

(1) Typed or Printed Name

d. DO NOT REGULARLY MANUFACTURE OR SELL THE TYPE OF ITEMS INVOLVED

b. CANNOT MEET DELIVERY REQUIREMENT

c. UNABLE TO IDENTIFY THE ITEM(S)

a. CANNOT COMPLY WITH SPECIFICATIONS

9. MAILING LIST INFORMATION

WE DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF ITEM(S) INVOLVEDYES NO

10. RESPONDING FIRM

a. COMPANY NAME b. ADDRESS

c. ACTION OFFICER

(4) Date Signed

AFFIX

STAMP

HERE

(X all that apply)

FROM

DATE (YYMMDD)

SOLICITATION NUMBER

LOCAL TIME TO

(Last, First, Middle Initial) (YYMMDD)

(2) Title (3) Signature

FOLDFOLD

FOLD FOLD

(Specify)

(X one)

(INCLUDE ZIP CODE)

SPRMM1-21-R-RA93

2022 MAR 14 02:00 P.M.

or if handcarried, in the depository located in until local time (Date)

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, IV

III

INSTRS., CONDS., AND NOTICES TO OFFERORS

21. ACCOUNTING AND APPROPRIATION20. AMOUNT19. ACCEPTED AS TO ITEMS NUMBERED

SOLICITATION

Prescribed by GSA FAR (48 CFR) 53.214(c)

EVALUATION FACTORS FOR AWARD

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

LIST OF ATTACHMENTS

CONTRACT CLAUSES

M L

SEC. DESCRIPTION PAGE(S)

SPECIAL CONTRACT REQUIREMENTS

CONTRACT ADMINISTRATION DATA

DELIVERIES OR PERFORMANCE

INSPECTION AND ACCEPTANCE

H G F E D C B A

PACKAGING AND MARKING

DESCRIPTION/SPECS./WORK STATEMENT

SUPPLIES OR SERVICES AND PRICES/COSTS

SOLICITATION/CONTRACT FORM

14. ACKNOWLEDGMENT OF AMENDMENTS

opposite each item, delivered at the designated point(s), within the time specified in the schedule.

from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set

(60 calendar days unless a different12. In compliance with the above, the undersigned agrees, if this offer is accepted within ______ calendar days

CODE

(Signature of Contracting Officer)

10. FOR INFORMATION

CALL:

(Type or print)

11. TABLE OF CONTENTS

33-132

(If other than Item 7)24. ADMINISTERED BY

CODE

STANDARD FORM 33

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

25. PAYMENT WILL BE MADE BY

8. ADDRESS OFFER TO

(If other than Item 7)

NSN 7540-01-152-8064

PREVIOUS EDITION NOT USABLE

7. ISSUED BY

RATING PAGE OF

PAGESSOLICITATION, OFFER AND AWARD

2. CONTRACT NO. 5. DATE ISSUED 6. REQUISITION/PURCHASE NO.4. TYPE OF SOLICITATION

A. NAME B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

15A. NAME

AND

ADDRESS

OFFEROR

16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(TYPE OR PRINT)

18. OFFER DATE17. SIGNATURE15B. TELEPHONE NO. (Include areacode) 15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE

27. UNITED STATES OF AMERICA 28. AWARD DATE

AWARD

(Hour)

NEGOTIATED (RFP)

CODE CODE

FACILITY

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

26. NAME OF CONTRACTING OFFICER

13. DISCOUNT FOR PROMPT PAYMENT

3. SOLICITATION NO.

period is inserted by the offeror)

(See Section I, Clause No. 52-232-8)

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related doc-uments numbered and dated:

10 CALENDAR DAYS 20 CALENDAR DAYS 30 CALENDAR DAYS CALENDAR DAYS

AMENDMENT NO. DATE AMENDMENT NO. DATE

SEC. PAGE(S)DESCRIPTION

(To be completed by Government)

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

SEALED BID (IFB)

NOTE: In sealed bid solicitations "offer" and "offeror": mean "bid" and "bidder".

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-10. All offers are subject to all terms and conditions contained in this solicitation.

(REV. 4-85)

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

M ITEM23. SUBMIT INVOICES TO ADDRESS SHOWN IN(4 copies unless otherwise specified)41 U.S.C. 253(c)( )10 U.S.C. 2304(c)( )

OFFER (Must be fully completed by offeror)

PART - THE SCHEDULE PART - CONTRACT CLAUSES

PART - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

PART - REPRESENTATIONS AND INSTRUCTIONS

DO-A3 1 46

SPRMM1-21-R-RA93 X 2022 FEB 11 21034-0030 (LTC* )

SPRMM1

DLA MARITIME - MECHANICSBURG

DLR PROCUREMENT OPS DLA-ZI

P. O. BOX 2020, 5450 CARLISLE PIKE

MECHANICSBURG PA 17055-0788

BLDG.410, SOUTH END, CODE N7, BAY B-29 02:00PM 2022 MAR 28228

A.E. PUCHALSKY ZIBA11 (717) 550-3120

X 1 X 23 X 2 X 4 X 30

X 7 X 17

X 18 X 30 X 19 X 44 X 21 X 45

EST UNIT OF UNIT

ITEM NO. QTY ISSUE PRICE AMOUNT

THE ISSUE DATE FOR THIS SOLICITATION IS

0001 NSN: 7Z 6625-01-645-0987 INDEFINITE

PUMP, HAND ORANGE

P/N 3750-011-005

0002 NSN 7Z 6625-01-645-4407 INDEFINITE

PUMP, HAND WHITE

P/N 3750-011-007

0003 NSN 7Z 6625-01-646-7624 INDEFINITE

PUMP, HAND BLUE

SEE SCHEDULE B PRICING SPREADSHEET

INSPECTION AT ORIGIN

ACCEPTANCE AT ORIGIN

EMAIL: AMY.PUCHALSKY@DLA.MIL

SEE SCHEDULE B PRICING SPREADSHET

(07 JAN 2023 THRU 06 JAN 2024)

POC: AMY PUCHALSKY

SEE SCHEDULE B PRICING SPREADSHEET

CONTINUATION SHEET

SUPPLIES/SERVICES

P/N 3750-011-003

CORRECTED TO READ 14 FEB 2022 AND THE

CLOSING DATE IS CORRECTED TO READ 14 MAR 2022

PACKAGING IAW MIL-STD 2073

CONTINUATION SHEET

Page 2A of 46

(PLEASE NOTE THAT SECTIONS B THROUGH H MAY NOT BE IN ALPHABETICAL ORDER.

PLEASE READ SOLICITATION IN ITS ENTIRETY).

SECTION A - GENERAL INFORMATION FOR OFFERORS

1. The purpose of this solicitation is to establish an indefinite-delivery type contract for the supplies listed in Section B, that will provide stock coverage for customers both overseas and in the United States, including Alaska and Hawaii, and our possessions.

2. Under this solicitation, the resulting contract will be a Firm-Fixed-Price, Indefinite-Quantity Contract issued under FAR Part 12, with three (3) one year base periods and two (2) one year option periods. The total contract period will be five years. The terms “year” or “contract year,” as used in this solicitation, mean a period of 365 days beginning on the contract start date and every 365 days thereafter, except for a leap year, in which the contract year shall be 366 days.

3. The method used to place orders under this contract will be: Delivery Orders placed by DLA Maritime at Mechanicsburg (DLA-Mech). DLA-Mech will issue delivery orders with the awardee for the supplies cited in Section B. This contract is not obligating any funds. Funding will be provided on each delivery order placed under the contract.

4. Award will be made to the responsible offeror submitting the lowest priced, technically acceptable offer.

A technically acceptable offer is one in which the offeror complies with the instructions contained in Section L of the solicitation and does not take exception, nor object, to any of the terms of this solicitation. Offers that are not technically acceptable will not be considered for award.

5. Some clauses/provisions may not appear in the correct section (D-M), due to system constraints.

6. The stated contract minimum and maximum is as follows:

a. Stated Contract Minimum: 2 units

b. Stated Contract Maximum: $808,695.00

The maximum value is calculated as seven hundred and fifty (750) percent of the estimated ADV.

*Note: Contract period as defined in this clause means the extended contract shall be inclusive of any/all option periods.

7. **See Attachment 3 regarding MIL-STD-129, MIL-STD-130, and IUID marking**

CONTINUED ON NEXT PAGE

CONTINUATION SHEET

Page 2B of 46

10. Upon award the contractor shall affix a calibration label to each unit of General Purpose Electronic Test Equipment (GPETE), deliverable under the resulting contract. The calibration label shall include the date the instrument was calibrated by the contractor, and the correctness of calibration shall be certified by proposed signature thereon. Further, the contractor shall affix the next due date for calibration in accordance with the following interval: Minimum 12 months.

11. Upon award the contractor shall affix a warranty label to each unit of General Purpose Electronic Test Equipment (GPETE), deliverable under the resulting contract. The warranty label shall indicate the Nomenclature, Manufacturer, CAGE, Model Number, NSN, Contract Number, and Warranty expiration date.

12. One of more of the following Post Award conferences may be held at NAVSUP WSS Mechanicsburg at the discretion of the Contracting Officer: Guidance Conference and/or Provisioning Conference:

a. GUIDANCE CONFERENCE REQUIREMENTS – The contractor shall attend a Guidance Conference conducted at NAVSUPWSS Mechanicsburg. The purpose of this conference is review of provisioning requirements as outlined in MIL-PRF-49506. This conference is to be held no later than 120 days after award of contract and will normally be one day in duration.

b. PROVISIONING CONFERENCE REQUIREMENTS – The contractor will ensure that one unit deliverable under this contract will be available for the provisioning conference. The contractor will ensure that the unit is at the provisioning conference, and will provide a representative capable of disassembling/reassembling the unit to answer support/repair questions. In addition, the contractor will provide an administrative/contractual representative capable of answering administrative and/or contractual questions. The contractor shall also be responsible for the refurbishment/recalibration of the unit before delivering the unit to the Navy. The cost for supplying technical documentation and the cost of the last deliverable unit will be withheld until these requirements are satisfied.

SECTION B – SCHEDULE OF SUPPLIES

This solicitation is for the acquisition of items manufactured per stated specifications. Award will be made on an all or none basis.

1. Offerors shall provide their prices in the Section B Pricing Spreadsheet found below.

2. Section B Spreadsheet Information/Instructions.

CLIN NSN ITEM DESCRIPTION UM P/N

0001 6625-01-645-0987 PARTS KIT, PRV 3750 EA 3750-011-005

0002 6625-01-645-4407 PARTS KIT, PRV 3750 EA 3750-011-007

0003 6625-01-646-7624 PARTS KIT, PRV 3750 EA 3750-011-003

CONTINUED ON NEXT PAGE

CONTINUATION SHEET SPRMM1-21-R-RA93

Page 2C of 46

3. Section B – Pricing Spreadsheet.

CLIN NSN ADQ Quantity Ranges

FROM

Quantity Ranges

Base Year

Option Year 1

Option Year 2

0001 6625-01-645-0987 20 1 9 10 19 20 29 30 39

0002 6625-01-645-4407 4 1 3 4 6 7 9 10+

0003 6625-01-646-7624 15 1 6 7 12 13 18 19 24

ADQ: Estimated Annual Demand Quantity

Quantity Ranges: Self-Explanatory (Offeror is authorized to quote alternate quantity ranges considered to be more advantageous to the Government)

Base Year One – Option Year Two: Offeror shall fill in each base year and each option year unit price for each quantity range. All unit prices shall be priced as FOB Origin. Unit prices proposed shall not include shipping costs.

4. Please identify the following, if different from your facility/cage. If locations are the same as offeror’s address, offeror can indicate “SAME”.

CAGE for performance: ________________ CAGE for inspection: ________________ CAGE for acceptance: ________________

SECTION D – PACKAGING AND MARKING

Packaging shall be in accordance with MIL-STD-2073 unless otherwise specified in the delivery order, as certain immediate use requirements may allow for commercial packaging in accordance with ASTM-D-3951

– Standard Practice for Commercial items. The MIL-STD-2073 packaging shall be in conformance with the Packaging Requirements Code as shown below:

Page 2D of 46

PACKAGING REQUIREMENT CODE

PCK CTGY CD: ZZZ0

HM QUP ICQ PMT CD PM WM CUD CT UC LP IC UCL SP MK PACK UNIT PKWT

N 001 000 ZZ 1 00 ZZ ZZ Z ZZ A ZZ A ZZ EFF

UNIT PKCU OPI CAGE SPI NUMBER REV SPI DATE CONTAINER NSN

UNIQUE: N SUPPLEMENTAL INSTRUCTIONS

ZZ = PACK PER MIL-STD-2073-1E APPENDIX D

PPPM LEVEL: SHELF LIFE CD: 0 SHELF LIFE ACTION CD: 00

SECTION E – INSPECTION AND ACCEPTANCE

SECTION F – DELIVERIES

1. Place of Delivery: The place of delivery for all items to be acquired hereunder will be specified in individual delivery orders issued under the resultant Indefinite-Delivery Indefinite-Quantity contract.

2. Desired/Required Delivery:

DLA desires delivery of a quantity range up to Qty 20 units (0001), up to Qty 4 units (0002) and up to Qty 15 units (0003) to be delivered within 175 days after receipt of a delivery order.

If the offeror is unable to meet the desired delivery schedule stated above, it may, without prejudicing evaluation of its offer, propose a delivery schedule below. However the offeror’s proposed delivery schedule must not extend the delivery beyond the time for delivery in the Government’s required delivery schedule as follows:

DLA requires delivery of a quantity range up to Qty 20 units (0001), up to Qty 4 (0002) and up to Qty 15 (0003) to be delivered within 175 days after receipt of a delivery order.

Contractor’s proposed delivery schedule: _______________________________________________

1. ACCELERATED DELIVERIES: Accelerated deliveries in advance of the specified delivery schedule are authorized. Any accelerated delivery will be at no additional expense to the Government, unless specifically authorized by the Procuring or Administrative Contracting Officer.

2. PARTIAL SHIPMENTS: Shipments of item quantities less than each line item quantity specified in the delivery order schedule are authorized. Multiple shipments to one destination are authorized. Any partial shipment will be at no additional expense to the Government, unless specifically authorized by the Procuring or Administrative Contracting Officer.

SPRMM1-21-R-RA93 PAGE 4 OF 46

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

52.212-1

INSTRUCTIONS TO OFFERORS -- COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 21

WSSTERMBZ03

COMMERCIAL ITEM PROCUREMENT NOTICE - SOLICITATION

The NAVSUP WSS has been granted a class deviation (CL-00-203) that permits us to use the solicitation and award forms currently available in our automated procurement system instead of the SF 1449 when conducting procurements for commercial items. This procurement is being conducted in accordance with FAR Part 12, Acquisition of Commercial Items.

Information appearing on the face of the DD Form 1707, SF 18, or SF 33 that c onflicts with clauses or provisions contained elsewhere in this solicitation shall be disregarded.

CENTRAL CONTRACTOR REGISTRATION:

To be eligible for award, you must have an active registration in the DoD Cent ral Contractor Registration (CCR) database (See DFARS 204.73). Registration in CCR can be accomplished at: http://www.ccr.gov.

FOB:

Quotes/Offers shall be submitted on an:

( < > ) FOB Destination basis ( <X> ) FOB Origin basis

ACCEPTANCE OF MATERIAL:

Acceptance shall occur:

( < > ) By the ACO at the contractor's facility based on an executed Certificate of Conformance.

( < > ) By the consignee at Destination.

( < > ) Fast Pay procedures apply.

TAILORING OF CLAUSES:

The following clauses have been tailored.

52.212-1, Instructions to Offerors - Commercial Items 52.212-4, Contract Terms and Conditions - Commercial Items Paragraph (b) of 52.212-3 is inapplicable to this procurement. (02-02)

PART I - THE SCHEDULE

SECTION C

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

CLIN: 0001

NIIN: 016450987 ACTIVITY USE ONLY: TDP VERSION NO.: 006

ITEM NAME: PUMP, HAND ORANGE

SPRMM1-21-R-RA93 PAGE 5 OF 46

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the PUMP, HAND ORANGE .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The PUMP, HAND ORANGE furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no.

<13859 3750-011-005>

3.2 Marking - This item shall be physically identified in accordance with <MIL-STD-129, REV R, 27 SEP 2019> .

3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements:

Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number.

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new.

Code 6: Part redesigned - Parts not interchangeable.

3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection.

If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part.

The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard.

If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned.

These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall

SPRMM1-21-R-RA93 PAGE 6 OF 46

insure SubContractor compliance with these requirements.

Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided:

Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere.

CLIN: 0002

NIIN: 016454407 ACTIVITY USE ONLY: TDP VERSION NO.: 002

ITEM NAME: PUMP, HAND, WHITE

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the PUMP, HAND, WHITE .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The PUMP, HAND, WHITE furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no.

<13859 3750-011-007>

3.2 Marking - This item shall be physically identified in accordance with <MIL-STD-130, REV N, 16 NOV 2012> .

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new.

Code 6: Part redesigned - Parts not interchangeable.

CLIN: 0003

NIIN: 016467624 ACTIVITY USE ONLY: TDP VERSION NO.: 004

ITEM NAME: PUMP, HAND BLUE

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements

SPRMM1-21-R-RA93 PAGE 7 OF 46

for the PUMP, HAND BLUE .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The PUMP, HAND BLUE furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no.

<13859 3750-011-003>

3.2 Marking - This item shall be physically identified in accordance with <MIL-STD-130, REV N, 16 NOV 2012> .

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new.

Code 6: Part redesigned - Parts not interchangeable.

PART I - THE SCHEDULE

SECTION D

PACKAGING AND MARKING

CLIN: 0001

NIIN: 016450987 ACTIVITY USE ONLY: TDP VERSION NO.: 006

ITEM NAME: PUMP, HAND ORANGE

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

CLIN: 0002

NIIN: 016454407 ACTIVITY USE ONLY: TDP VERSION NO.: 002

ITEM NAME: PUMP, HAND, WHITE

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

SPRMM1-21-R-RA93 PAGE 8 OF 46

CLIN: 0003

NIIN: 016467624 ACTIVITY USE ONLY: TDP VERSION NO.: 004

ITEM NAME: PUMP, HAND BLUE

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

252.211-7003

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier' means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

SPRMM1-21-R-RA93 PAGE 9 OF 46

252.211-7003 (CONT)

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used.

The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more; except for the following line items" Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, Or Exhibit Line Item Number Item Description

SPRMM1-21-R-RA93 PAGE 10 OF 46

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(If items are identified in the Schedule, insert (See Schedule" in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number < > .

(iv)Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storagefor a Major Defense Acquisition Program as specified in Attachment Number < > .

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that --

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs)(Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and.

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent; (e.g. Vehicle Identification Number):

and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number: DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only:

original part, lot or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version:

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i)(ii) or (iv) of this clause, or when item unique identification is provided under paragraph (c)(1)(v) in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number)

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

SPRMM1-21-R-RA93 PAGE 11 OF 46

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause, or when item unique identification is provided under paragraph (c)(1(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used)**

(6) Original part number.**(if there is serialization within the original part number).**

(7) Lot or batch number.(if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used**)**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area Work Flow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http:/dodprocurementtoolbox.com/site/ uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number < > , Unique Item Identifier

Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g) in the applicable subcontract(s) including subcontracts for commercial items.

252.211-7006

PASSIVE RADIO FREQUENCY IDENTIFICATION (DEC 2019)

(a) Definitions. As used in this clause--

"Advance shipment notice" means an electronic notification used to list the contntents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency identification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

"Bulk commodities" means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

"Case" means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

"Electronic Product Code (EPC)" means an identification scheme for universally identifying physical objects via RFID tags and other means. The standardized EPC data consists of an EPC (or EPC identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC tags. In addition to this standardized data, certain classes of EPC tags will allow user-defined data. The EPC Tag Data Standards will define the length and position of this data, without defining its content.

SPRMM1-21-R-RA93 PAGE 12 OF 46

252.211-7006 (CONT)

PASSIVE RADIO FREQUENCY IDENTIFICATION (DEC 2019)

"EPCglobal" means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

"Exterior container" means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

"Palletized unit load" means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

"Passive RFID tag" means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive RFID tags that meet the EPCglobal Class 1 Geneeration 2 standard.

"Radio frequency identification (RFID)" means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

"Shipping container" means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., woodenboxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that --

(i) Are in any of the following classes of supply, as defined in DoD Manual 4140.01, Volume 6, DoD Supply Chain Materiel Management Procedures: Materiel Returns, Retention, and Disposition:

(A) Subclass of Class I - Packaged operational rations.

(B) Class II - Clothing, individual equipment, tentage, organizationnal tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(D) Class IV - Construction and barrier materials.

(E) Class VI - Personal demand items (non-military sales items).

(F) Subclass of Class VIII - Medical materials (excluding pharmaceuticals, biologicals, and reagents -suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX - Repair parts and components including kits, assembliees and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and:

(ii) Are being shipped to one of the locations listed at https://www.acq.osd.mil/log/sci/RFID_ship-to-locations.html or to--

(A) A location outside the contiguous United States when the shipment has been assigned Transportation

Priority 1, or to--

(B) The following location(s) deemed necessary by the requiring activity:

Contract Line, Subline, or Exhibit Line Item Number Location City State DoDAAC

(2) The following are excluded from the requirements of paragraph (b)(1)of this…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Feb 14, 2022.