2.01 N6883624Q0184.pdf

SEE ADDENDUM

(No Collect Calls)

N6883624Q0184 19-Aug-2024

b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

12:00 AM 06 Sep 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N688369. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

ROBERT S. EDWARDS

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

1301177283

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

NAVSUP FLC JACKSONVILLE CONTRACTS DIV

ROBERT EDWARDS

110 YORKTOWN AVE, 3RD FLOOR

JACKSONVILLE FL 32212-0097

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N65971 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

NAVAL CONSTRUCTION TRAINING CENTER

PAMELA SIMMONS

5510 CBC 8TH STREET

BUILDING 443

GULFPORT MS 39501-5003

TEL: 228-871-2977 FAX:

FAX:

TEL: 904-542-1099 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

334290

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF77

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N6883624Q0184

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 4 Each

NEMA ENCLOSURE

FFP

NEMA ENCLOSURE IAW the PWS.

4 unit - PC/ABS Alloy Plastic Waterproof Outdoor Junction Box, 16.4"x12.4"x7.1" IP66 Electrical Enclosure with Mounting Plate, Wall Brackets, Grey Hinged Door Weatherproof for Projects. Waterproof junction boxes are made from flame resistance PC/ABS alloy plastic, which has demonstrated flame resistance through a rigorous 850? hot wire test, offering numerous advantages over traditional ABS plastic. This premium material provides enhanced durability, superior resistance to high temperatures and pressures, and longevity that's second to none. It's the perfect solution for high-end projects that demand the highest-quality equipment. The electrical enclosure boxes feature an IP66 waterproof and weatherproof design, they offer superior protection against water, rain, dust, snow, oil, UV rays, and other environmental elements. This robust design makes it ideal for use in both indoor and outdoor settings, ensuring that your electrical equipment is protected from harsh conditions. The EXTERNAL size is 16.4"x12.4"x7.1" (415x315x180mm) for the weatherproof box.

FOB: Destination

NSN: 99991000000880

MILSTRIP: 1301177283

PURCHASE REQUEST NUMBER: 1301177283

PSC CD: 9999

NET AMT

0003 23 Each

INTERIOR DOME CAMERA - QNV8010R

FFP

BRAND NAME OR EQUAL TO Samsung Model #QNV8010R. 5MP/2.8 MM fixed lens 30fps vandal resistant dome camera – 23 units. 5 Megapixel Outdoor Vandal Resistant Dome network camera featuring WiseStream II, Samsung's compression technology, triple codec H.265/H.264/MJPEG, 2.8mm lens, IR, IP66, IK10, PoE/12VDC, 120dB True WDR, Intelligent Video Analytics, Hallway View, one-way audio and SD card slot (SD/SDHC/SDXC up to 128GB).

Features

• 5 Megapixel resolution

• Built-in 2.8mm fixed lens

• 30fps@all resolutions (H.265/H.264)

• H.265, H.264, MJPEG codec supported, Multiple streaming

• Day & Night (ICR), WDR (120dB)

• Defocus detection, Directional detection, Motion detection, Enter/Exit, Tampering, Virtual line

• micro SD (128GB) memory slot, PoE / 12V DC

• IR viewable length 20m, IP66, IK10

• Hallway view support

• Analog video out

• LDC support (Lens Distortion Correction)

FOB: Destination

NSN: 99991000000880

MILSTRIP: 1301177283

0004 11 Each

EXTERIOR CAMERA - QNO7082R

FFP

Exterior bullet camera – BRAND NAME OR EQUAL TO Samsung Model #QNO7082R 4MP/2-10MM varifocal lens 30fps vandal resistant bullet camera – 11 units – Max 4MP resolution, up to 30fps, Color: 0.1Lux(F1.6, 1/30sec), B/W:

0Lux (IR LED On), 3.2 – 10mm (3.1x) motorized varifocal, IR viewable length:

30m(98.42ft), Day & Night (ICR), WDR(120dB), H.265,H.264, MJPEG, Multiple streaming supported. Motion detection, Tampering, Defocus detection, Hallway view (90*/270*), LDC support, Micro SD/SDHC/SDXC memory slot (Max.

128GB), IP66, IK10.

FOB: Destination

NSN: 99991000000880

MILSTRIP: 1301177283

0005 1 Each

CAMERA SERVER - MODEL XRN6410RB264

FFP

Camera server is a 64 channels 4K network video recorder, 64TB. – BRAND NAME OR EQUAL TO WISENET Model #XRN6410RB264 8K NVR 64TB Intel Based 64 channel nvr– 1 unit - • Up to 64CH, 32MP Resolution • Max.

400Mbps network camera recording • HDMI out • User friendly UI / UX • AI search support when working with Wisenet AI camera • Dynamic Event support - New event function of cameras is available without software update • Bookmark management (Up to 100 set) • H.265, H.264, MJPEG compression support • SATA 8ea (Up to 80TB, Non-RAID mode) • RAID 5/6 support.

FOB: Destination

NSN: 99991000000880

MILSTRIP: 1301177283

0006 1 Each

MISC HARDWARE

FFP

Misc hardware – screws, cabling, zip ties, Velcro.

FOB: Destination

NSN: 99991000000880

MILSTRIP: 1301177283

0007 4 Each

16 PORT SWITCH

FFP

16 port Poe+switch – 4 units – 16 x Gigabit PoE+ ports

• 2 x Shared Gigabit ports (RJ-45 or SFP)

• 220W PoE power budget

• Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping

• Extend PoE+ signal up to 656 ft./200m at 10Mbps

• Front panel 4-digit LED display provides PoE power statistics

• Surveillance mode GUI for simplified configuration and network monitoring

• Device discovery for ONVIF compliant IP cameras and NVRs

• Capability to upload building floorplans to create an E-map of surveillance devices

• Capability to change IP camera IP address settings

• Upgrade IP camera firmware

• Change IP camera administrator user name and password

• Bandwidth control per port

• 802.1Q, MAC, Surveillance, and Voice VLAN support

• IEEE 802.1p QoS with queue scheduling support

• Smart Fan

• 36Gbps switching capacity

• NDAA / TAA compliant (U.S. and Canada only) FOB: Destination

NSN: 99991000000880

MILSTRIP: 1301177283

PERFORMANCE WORK STATEMENT

CLOSED CIRCUIT TV (CCTV) DIGITAL SECURITY CAMERA SYSTEMS FOR NAVAL

CONSTRUCTION TRAINING CENTER

PART 1

GENERAL INORMATION

1. Background. The Naval Construction Training Center (NCTC), Gulfport is a Naval shore activity in an active operating status. An Echelon V Command, NCTC's Commanding Officer reports to the Center for Seabees and Facilities Engineering (CSFE); the Naval Education and Training Command (NETC); and ultimately, to the Chief of Naval Operations (CNO), respectively. NCTC Gulfport is subject to the regional area coordination authority of the Commanding Officer, Naval Construction Battalion Center (NCBC), Gulfport on which it is located.

NCTC Gulfport provides support to the CSFE Detachment Sheppard Air Force Base, Texas; and CSFE Detachment Fort Leonard Wood, Missouri as their responsible Training Systems Detachment.

Requirements:

If an item in this solicitation is identified as "brand name or equal," the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation.

To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must-

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by-

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an "equal" product, the offeror shall provide the brand name product referenced in the solicitation.

0001. Nema Enclosure – 4 unit - PC/ABS Alloy Plastic Waterproof Outdoor Junction Box, 16.4"x12.4"x7.1" IP66 Electrical Enclosure with Mounting Plate, Wall Brackets, Grey Hinged Door Weatherproof for Projects.

Waterproof junction boxes are made from flame resistance PC/ABS alloy plastic, which has demonstrated flame resistance through a rigorous 850℃ hot wire test, offering numerous advantages over traditional ABS plastic. This premium material provides enhanced durability, superior resistance to high temperatures and pressures, and longevity that's second to none. It's the perfect solution for high-end projects that demand the highest-quality equipment. The electrical enclosure boxes feature an IP66 waterproof and weatherproof design, they offer superior protection against water, rain, dust, snow, oil, UV rays, and other environmental elements. This robust design makes it ideal for use in both indoor and outdoor settings, ensuring that your electrical equipment is protected from harsh conditions. The EXTERNAL size is 16.4"x12.4"x7.1" (415x315x180mm) for the weatherproof box.

0002. 16 port Poe+switch – 4 units – 16 x Gigabit PoE+ ports

2 x Shared Gigabit ports (RJ-45 or SFP) 220W PoE power budget Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping Extend PoE+ signal up to 656 ft./200m at 10Mbps Front panel 4-digit LED display provides PoE power statistics Surveillance mode GUI for simplified configuration and network monitoring Device discovery for ONVIF compliant IP cameras and NVRs Capability to upload building floorplans to create an E-map of surveillance devices Capability to change IP camera IP address settings Upgrade IP camera firmware Change IP camera administrator user name and password Bandwidth control per port 802.1Q, MAC, Surveillance, and Voice VLAN support IEEE 802.1p QoS with queue scheduling support Smart Fan 36Gbps switching capacity NDAA / TAA compliant (U.S. and Canada only)

0003. Interior dome camera – BRAND NAME OR EQUAL TO Samsung Model #QNV8010R. 5MP/2.8 MM fixed lens 30fps vandal resistant dome camera – 23 units. 5 Megapixel Outdoor Vandal Resistant Dome network camera featuring WiseStream II, Samsung's compression technology, triple codec H.265/H.264/MJPEG, 2.8mm lens, IR, IP66, IK10, PoE/12VDC, 120dB True WDR, Intelligent Video Analytics, Hallway View, one-way audio and SD card slot (SD/SDHC/SDXC up to 128GB).

Features

5 Megapixel resolution Built-in 2.8mm fixed lens 30fps@all resolutions (H.265/H.264) H.265, H.264, MJPEG codec supported, Multiple streaming Day & Night (ICR), WDR (120dB) Defocus detection, Directional detection, Motion detection, Enter/Exit, Tampering, Virtual line micro SD (128GB) memory slot, PoE / 12V DC IR viewable length 20m, IP66, IK10 Hallway view support Analog video out LDC support (Lens Distortion Correction)

0004. Exterior bullet camera – BRAND NAME OR EQUAL TO Samsung Model #QNO7082R 4MP/2-10MM varifocal lens 30fps vandal resistant bullet camera – 11 units – Max 4MP resolution, up to 30fps, Color:

0.1Lux(F1.6, 1/30sec), B/W: 0Lux (IR LED On), 3.2 – 10mm (3.1x) motorized varifocal, IR viewable length:

30m(98.42ft), Day & Night (ICR), WDR(120dB), H.265,H.264, MJPEG, Multiple streaming supported. Motion detection, Tampering, Defocus detection, Hallway view (90*/270*), LDC support, Micro SD/SDHC/SDXC memory slot (Max. 128GB), IP66, IK10.

0005. Camera server is a 64 channels 4K network video recorder, 64TB. – BRAND NAME OR EQUAL TO WISENET Model #XRN6410RB264 8K NVR 64TB Intel Based 64 channel nvr– 1 unit - • Up to 64CH, 32MP Resolution • Max. 400Mbps network camera recording • HDMI out • User friendly UI / UX • AI search support when working with Wisenet AI camera • Dynamic Event support - New event function of cameras is available without software update • Bookmark management (Up to 100 set) • H.265, H.264, MJPEG compression support • SATA 8ea (Up to 80TB, Non-RAID mode) • RAID 5/6 support.

0006. Misc hardware – screws, cabling, zip ties, Velcro.

0007. Ceiling Tiles – replacement of tiles where removal of old hardware is done.

1.1. Scope This Performance Work Statement (PWS) describes Contractor services that include all labor required for the removal of existing cameras and hardware, installation and upgrade of Closed Circuit TV (CCTV) Digital Security Camera Systems and other electronic equipment peripherals required to include interior and exterior cameras, DVR server, Power Over Ethernet (Poe) switch, CAT6e cabling, screws, cabling, zip ties, replacement ceiling tiles, etc. Contractor and technicians SHALL possess sufficient knowledge and work experience to complete the installation of new equipment, diagnose respective problems, troubleshoot source of problems and make necessary repairs to effectively correct deficiencies for all CCTV equipment being installed/upgraded in the building. The Contractor shall train personnel on how to save video files to an external media device (DVD or external HDD) and open and view the files. Contractor SHALL provide verifiable validating ability to provide services described in this PWS.

The CCTV equipment is located at BLDG 460 and includes the inside, four floors of the living quarters, as well as around the exterior and parking lot area of BLDG 460 located at Naval Construction Battalion Center, Gulfport, Mississippi.

A commercial warranty, of no less than one-year, to include service and parts shall begin upon completion and acceptance of the completed work as stated in the contract.

1.2. Period of Performance The work should be performed within 60 days of award of contract. Contractor shall guarantee and provide one-year of service/maintenance on new CCTV equipment.

1.3. Hours of Operation Work shall ve performed during the core business hours of 0700 (7:00 a.m.) through 1600 (4:00 p.m.) Monday thru Friday and shall not include after-hours, weekends and holidays.

1.4. Federal Government Holidays

a. New Years Day 1st day of January Martin Luther King Jr.'s Birthday 3rd Monday of January Presidents Day 3rd Monday of February Memorial Day Last Monday of May Juneteenth National Independence Day 19th day of June Independence Day 4th day of July Labor Day 1st Monday of September Columbus Day 2nd Monday of October Veterans Day 11th day of November Thanksgiving Day 4th Thursday of November Christmas Day 25th day of December

b. When one of the above designated legal holidays falls on a Sunday, the following Monday will be observed as a legal holiday. When a legal holiday falls on a Saturday, the proceeding Friday is observed as a legal holiday. This list of holidays relates to Government duty days and is not intended to supplement or otherwise alter the provisions of any Wage Determination regarding applicable paid holidays.

c. It is understood and agreed between the Government and the Contractor that observance of such days by Government personnel shall not be a reason for an additional period of performance, or entitlement of compensation except as set forth within the contract.

d. When the Department of Defense grants excused absence to its employees, the Contractor agrees to continue to provide sufficient personnel to perform critical tasks already in operation or scheduled, and shall be guided by the instructions issued by the Contracting Officer (KO) or the Contracting Officer’s Representative (COR). Changes in employee work schedules shall comply with the terms and conditions of the contract, to include payment provisions.

e. Contractor shall furnish all labor, tools, transportation, supervision, and equipment to perform the work required herein. Upon completion of the contract services, a visual inspection of the work completed will be signed by the DGR.

1.5. Place of Performance The work to be performed under this contract will be performed at located at 332 Fifth St, NCBC Gulfport, MS 39501-5003, Facility 460.

1.6. Designated Government Representative (DGR) This acquisition is not technically complex and, for that reason, it does not require a Contracting Officer Representative (COR). However, a DGR will report to the Contracting Officer that all products and/or services from the contractor have been delivered and accepted. The Designated Government Representative and Technical POC for this contract will be provided at time of award.

1.7. Motor Vehicle Operators Contractor’s personnel, whose tasks involve operation of any vehicles, shall possess a valid U.S. state driver’s license, certificates and permits, applicable for the type and class of vehicle being operated.

1.7.1 Contractor Vehicles

a. All Contractor vehicles shall be readily identifiable. Identification shall include displaying Contractor’s name in a clear and unobstructed location on the vehicle.

b. Motor vehicles entering Naval Construction Battalion Center (CBC) Gulfport Operational Area shall be properly licensed, insured, and registered with the Installation Access Pass Office.

1.8. Contractor Access and Use of Premises. The Contractor shall be responsible for securing the necessary permits and base access passes for contractor personnel, vehicles, and equipment for the duration of the contract. CBC Security Forces reserve the right to refuse issuance of a pass to an employee of the Contractor for any reason deemed valid by the Government.

Contractors shall identify themselves as either a U.S. Owned or a Foreign Owned, Controlled or Influenced (FOCI) entity.

Citizenship. Visitors must be U.S. citizens. Foreign nationals are rarely granted access unless certain arrangements have been made with CBC Security Forces.

U.S. citizen personnel of a Foreign Owned, Controlled or Influenced (FOCI) entity shall be required to provide the security forces at the Pass and ID office located at 4701 Marvin Shields Blvd, Bldg 1, Gulfport MS 39501-5003 with vehicle registration, proof of insurance, driver’s license, and a second form of picture ID. A Visit / Access Request on company letterhead is also required at least 48 hours (recommend at least five days) in advance of VI maintenance/repair service.

U.S. Owned company personnel shall be required to provide the security forces with vehicle registration, proof of insurance, and driver’s license.

Infrequent Access (<30 days/year): Unless the Contractor/visitor is registered in the Defense Biometric Identification System (DBIDS), all infrequent visitors of less than 30 consecutive days will be required to stop at the Pass and Decal office every day to obtain a one-day pass until work is completed. Information regarding how to obtain the day passes will be provided by the DGR.

1.9. Non-Personal Service Statement Contractor management shall ensure that employees properly comply with the performance work standards outlined in this Performance Work Statement. Contractor employees shall perform their duties independent of, and without the supervision of, any Government official or other Defense Contractor.

The tasks, duties, and responsibilities set forth in this project may not be interpreted or implemented in any manner that results in any Contractor employee creating or modifying Federal policy, obligating the appropriated funds of the United States Government, overseeing the work of Federal employees, providing direct personal services to any Federal employee, or otherwise violating the prohibitions set forth in Parts 7.5 and 37.1 of the Federal Acquisition Regulation (FAR). The Government will control access to the facility and will perform the inspection and acceptance of the completed work.

1.10. Employment of Federal Employees The contractor shall not employ or enter into a contract with any person to perform work under this contract who is an employee of the United States Government, either military or civilian, unless such person receives approval IAW applicable Federal and DOD regulations.

1.11. Personnel Compliance The Contractor shall ensure that Contractor employees observe and comply with all local and higher authority policies, regulations, and procedures concerning fire, safety, environmental protection, sanitation, security, traffic, parking, energy conservation, flag courtesy, “off -limits” areas, and possession of firearms or other lethal weapons. When two or more directives or instructions apply, the Contractor shall comply with the more stringent of the directives or instructions.

1.12. Identification (ID) Badge The Contractor (to include subcontractors) shall provide each employee an Identification (ID) Badge, which includes at a minimum, the Company Name, Employee Name and a color photo of the employee. ID Badges shall be worn at all times during which the employee is performing work under this contract. Each Contractor (to include subcontractors) employee shall wear the ID Badge in a conspicuous place on the front of exterior clothing and above the waist except when safety or health reasons prohibit. The Contractor (to include subcontractors) shall be responsible for collection of ID Badges upon completion of the contract or termination of employee. A listing of issued identification cards shall be furnished to the KO prior to the contract performance date and updated as needed to reflect Contractor and subcontractor personnel changes.

1.13. Smoking/Drug/Alcohol Policy. The Contractor shall comply with local command smoking policies and workforce requirements. The Contractor shall also comply with all Federal statues, laws, and regulations to implement a Drug Free Workplace Program (DFWP) as well as work force requirements and local command policies.

1.14. Personnel Conduct. The selection, assignment, reassignment, transfer, supervision, management, and control of Contractor personnel employed to perform the work specified herein shall be the responsibility of the Contractor.

The contractor shall be responsible for the performance and conduct of Contractor and subcontractor employees at all times. The Contractor shall ensure that personnel present a professional appearance. Personnel employed by the Contractor in the performance of this contract, or any representative of the Contractor entering the installation shall abide by the security regulations listed in the contract and shall be subject to such checks by the Government as deemed necessary. The Contractor shall not employ for performance under this contract any person whose employment would result in a conflict of interest with the Government’s standards of conduct.

1.15. Personnel Removal Government rules, regulations, laws, directives, and requirements that are issued during the term of the performance period relating to law and order, installation administration, and security shall be applicable to all Contractor employees and representatives who enter the installation. Violation of such rules, regulations, laws, directives, or requirements shall be grounds for removal (permanently or temporarily as the Government determines) from the work site or installation. Removal of employees does not relieve the Contractor from the responsibility for the work defined in this performance work statement. The Contractor is expected to provide support services despite personnel removal or other unforeseen condition(s). Should replacement become necessary, the government reserves the right to review all resumes of proposed candidates.

• Removal by Installation Commander: The Installation Commander may, at his/her discretion, bar an individual from the installation under the authority of 18 U.S.C. 1382 (1972), for conduct that is determined to be contrary to good order, discipline, or installation security and safety.

• Removal Requested by Designated Government Representative (DGR): The DGR may require the Contractor to remove an employee working under this contract for reasons of misconduct or security violations.

Contractor employees shall be subject to dismissal from the premises upon determination by the DGR that such action is necessary in the interest of the Government.

• Removal by Military Police: Contractor employees may be denied entry to or may be removed from the installation by Military Police if it is determined that the employee’s presences on the installation may be contrary to good order, discipline, or installation security and safety.

• Removal for Unsatisfactory Performance: The Government reserves the right to require the Contractor to remove and replace any personnel who provide unsatisfactory performance, demonstrate insufficient knowledge, or possess inadequate skill levels necessary to complete assigned tasks. The skill level of the staff provided shall be current and consistent with new technologies.

1.16. Interaction With Other Activities Government and Contractor personnel will be working in common areas during working hours. Contractor performance shall not interfere with Government work in the area where any service or maintenance work is being performed. In the event the Contractor believes that Government and other Contractor personnel are interfering with the performance of the tasks described in this PWS, the Contractor shall notify the Designated Government Representative immediately. The Contractor is obligated to continue performance of the effort described in this contract unless there is authorization from the KO or Designated Government Representative to stop work. Failure by the Contractor to notify the Designated Government Representative and receive necessary instructions could result in denial of any additional costs incurred in performance of the contract under such conditions. Other Government Contractors may be performing required services in areas that interrelate with the requirements of this contract. The Government will facilitate initial contact between Contractors performing other contracts and this contract. The Contractor shall provide all further required coordination between other Contractors for any task specified in this contract that relates to or impacts on any other contracted work.

1.17. Safety The Contractor is solely responsible for compliance of all safety regulations of employees while working on Government owned facilities. All accidents which may arise out of, or in connection with, performance of services required herein which result in injury, death, or property damage, shall be reported in writing to the Contracting Officer and Designated Government Representative within twenty-four hours of such occurrence.

Reports shall provide full details of the accident, including statements from witnesses. The foregoing procedures shall also apply to any claim made by a third-party against the Contractor as a result of any accident that occurs in connection with performance under this contract.

PART 2

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

2. Government Furnished Items and Services.

2.1. Services The Government will provide the following services to facilitate Contractor access to NCBC Gulfport.

2.2. Facilities The Government will provide access to facilities for the Contractors use in support of this contract.

Any alterations to facilities shall be approved prior in writing and property shall be returned to its original condition prior to completion of this contract. Contractor shall be responsible for any damages or loss of use due to their negligence. Any signage shall conform to standard Navy/Installation signs/format and must be approved by the KO and DGR in writing prior to placement and may not be permanently affixed to any Government property or structure.

PART 3

CONTRACTOR FURNISHED ITEMS AND SERVICES

3. Contractor Furnished Items and Responsibilities.

3.1. General The Contractor shall provide all skilled personnel, labor, supervision, equipment, supplies, tools, materials, vehicles, transportation, supervision, and other items necessary to perform this prescribed project as defined in this PWS to meet the performance requirements, except for those items specified as Government furnished property and services.

3.1.1. The Contractor shall disconnect (if necessary) and remove existing equipment in accordance with local, state and Federal laws and regulations.

3.1.2. The Contractor shall ensure the delivery of all parts to the DGR at the place of performance in new and working condition.

3.1.3. The Contractor shall be responsible for all cost of damages, repairs, or replacement of Government property before final invoicing.

3.1.4. The Contractor shall coordinate all utility outages with the DGR.

3.1.5. The Contractor shall replace, as necessary, any damaged/missing ceiling tiles. The replacement tiles shall match the existing.

3.1.6. The Contractor shall be responsible for disposing of debris, trash, packing materials in their own containers.

3.2. Responsibilities of the Contractor

3.2.1. The Contractor shall provide a safe working environment for key consultants and all persons in his/her employ as prescribed by Engineering Manual (EM) 385-1-1, “General Safety Requirements” and 29 CFR 1910 “Occupational Health and Safety”. The Contractor shall be responsible for all damages to persons and property that occur in connection with the work and service under this contract, without recourse against the Government.

3.2.2. Contractor shall exercise extreme caution to protect building finishes, private property, military property, etc., from damage during the performance of these contract requirements. Contractor shall be responsible for all loss or damage or whatsoever kind and nature to all Government property, while in the performance of these contract requirements, which result in whole or in part from the negligence or omissions of Contractor, any of his Subcontractors or any employee, agent or any representative of the Contractor or Subcontractor(s).

3.2.3. The Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses and permits, and for complying with any Federal, State, and municipal laws, codes, and regulations applicable to the performance of the work.

3.2.4. . The Contractor shall be responsible for all materials delivered and work performed until completion and acceptance of the entire work, except for any completed unit of work which may have been accepted under the contract.

PART 4

SITE VISIT

4. Site Visit A site visit will be conducted on 27-Aug-2024 at 0900 (9:00 a.m.) CT.

4.1. The Primary Point of Contact for this site visit will be Kenneth Parker (kenneth.l.parker16.civ@us.navy.mil) and Rob Edwards (robert.s.edwards42.civ@us.navy.mil). All attendees shall email both POCs no later than 1200 (12:00 p.m.) CT, 22-Aug-2024.

4.2. Location 332 Fifith Street Facility 460, NCBC Gulfport, MS 39501

PART 5

CONTRACT TEXT FOR CERTAIN ACTIONS

5.1 SUPTXT204-9400(8-22) Prescription and Alternative Language

Contractor and all Contractor employees with access to or responsibility for this contract shall comply with DoD Directive 8500.1E IA, DoDI 8510.01 Risk Management Framework (RMF) for DoD IT, DoD Directive 5400.11 DoD Privacy Program, DoD 5200.2-R Personnel Security Program and HSPD 12

1. Be CAC ready at the properly designated IT System Level

2. At minimum, all contractor employees must possess/maintain the required background investigation as determined by the PDT and/or IT access user level. This requirement is critical in order to access the government data base systems It is the contractor’s responsibility to ensure that 100% of the contractor employees have the ability to acquire a favorably adjudicated background investigation. In addition, interim approval of clearances is not authorized.

3. Be citizens of the U.S

4. If at any time, any contractor employee requiring a Common Access Card (CAC) is unable to possess/maintain the required adjudicated background investigation, the contractor shall immediately notify the NAVSUP COR to coordinate removal of such a person from work under this contract.

5. Contractor employees with access to or responsibility for nonpublic government data under this contract must comply with HSPD-12 Personal Identity Verification (PIV) issuance requirements, known as the

CAC.

5.2 SUPTXT204-9400(4-22) CONTRACTOR UNCLASSIFIED ACCESS TO FEDERALLY CONTROLLED

FACILITIES, SENSITIVE INFORMATION, INFORMATION TECHNOLOGY (IT) SYSTEMS OR

PROTECTED HEALTH INFORMATION

The security text does not apply in cases where the contractor/vendor does not have access to Navy Marine Corps Intranet (NMCI) computers, is not issued a Common Access Card (CAC) and is involved in training or other short term duties of less than 30 days duration that allow for the use of a visitor request. In these cases, the government employee must submit a Visitor Access Request (VAR) to the main gate or applicable processing entity for your facility and assume responsibility to escort those without CAC Credentials.

This local text does not apply to non-United States (U.S.) Nationals (foreign nationals) who are contactor employees performing work overseas. This text is applicable to the U.S. Nationals living in the U.S. or overseas who are performing work on a Navy contract.

The investigation of a non-U.S. national at a foreign location must be consistent with a National Agency Check with Written Inquiries (NACI), to the extent possible and include a fingerprint check against the Federal Bureau of Investigation (FBI) criminal history database, an FBI investigations file (name check) search and a name check against the terrorist screening database. Also, the above cited reference notes that Foreign Nationals may not be granted CAC credentials until completion of their investigation and not in the interim.

Per Department of Defense Memorandum (DoDM) 5200.2, Department of Defense (DoD) components must initiate and ensure completion of a background investigation before applying the credentialing standards to a non-U.S.

national at a foreign location. The background investigation must be favorably adjudicated before a CAC can be issued to a non-U.S. national at a foreign location. The type of background investigation may vary based on standing reciprocity treaties concerning identity assurance and information exchanges that exist between the U.S. and its allies or agency agreements with the host country.

CONTRACTOR UNCLASSIFIED ACCESS TO FEDERALLY CONTROLLED FACILITIES, SENSITIVE

INFORMATION, IT SYSTEMS OR PROTECTED HEALTH INFORMATION

Executive Order 13467, Reforming Processes Related to Suitability for Government Employee, Fitness for Contractor Employees and Eligibility for Access to Classified National Security Information, Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The 5 CFR 32 Part 157 in concert with DoD Manual 1000.13, Vol 1, implements the Federal Standards.

APPLICABILITY

This text applies to all DoD sponsored individuals who require CAC eligibility (or login and P/W if acceptable per contract) for: Physical access to DoD facilities or non-DoD facilities on behalf of DoD; Logical access to information systems (whether on site or remotely); or remote access to DoD networks that use only the CAC logon for user authentication, or access to sensitive and protected information. This applies to the Office of the Secretary of Defense (OSD), the Military Departments, the Office of the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Combatant Commands, the Office of the Inspector General of the DoD, the Defense Agencies, the DoD Field Activities and all other organizational entities within the DoD (hereinafter referred to collectively as the "DoD Components").

Each contractor employee providing services at a Navy command under this contract is required to obtain a DoD CAC. Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.

ACCESS TO FEDERAL FACILITIES

Definition. As used in this clause - Military installation means a base, camp, post, station, yard, center, or other activity under the jurisdiction of the Secretary of a military department, or, in the case of an activity in a foreign country, under the operational control of the Secretary of a military department or the Secretary of Defense (see 10 U.S.C. 2801(c)(4)).

Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Command's Security Manager (CSM) upon arrival to the command and shall out-process prior to their departure at the completion of the individual's performance under the contract.

Training. Contractor employees who require routine physical access to a Federally controlled facility or military installation shall complete “Level I Antiterrorism Awareness Training” prior to gaining access to a facility and annually thereafter in accordance with DoDI O-2000.16 Vol. 1. In accordance with Department of Defense Instruction O-2000.16 Volume 1, DoD Antiterrorism (AT) Program Implementation: DoD AT Standards, Level I Antiterrorism Awareness Training shall be completed by:

1. Completion of “Level I Antiterrorism Awareness Training” available at https://jkodirect.jten.mil/pdf/atl1/launch.html; or

2. Under the instruction of a qualified Level I Antiterrorism Awareness instructor; or

3. By providing a training certificate for “Level I Antiterrorism Awareness Training” training showing completion within the last calendar year.

The contractor will submit certificates of completion for each affected contractor employee and subcontractor employee to the COR or to the contracting officer, if a COR is not assigned, prior to being granted access to a Federally controlled facility or military installation.

Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (d), in subcontracts, including subcontracts for commercial items, when subcontractor performance requires routine physical access to a Federally-controlled facility or military installation.

OPERATION SECURITY (OPSEC)

It is DoD policy according to DoD Directive 5205.02E, “DoD Operations Security (OPSEC) Program,” June 20, 2012, as amended to establish and maintain OPSEC programs to ensure national security-related missions and functions are protected.

Training: Contractor employees shall comply with all DoD OPSEC requirements and complete “OPSEC Awareness for Military Members, DoD Employees and Contractor” training within 30 days of onboarding the contract and annual refresher training thereafter. Training shall be completed through a DoD sponsored and certified computer or web-based learning instruction available at https://securityawareness.usalearning.gov/opsec/index.htm.

The contractor will submit certificates of completion for each affected contractor employee and subcontractor employee to the COR or to the contracting officer, if a COR is not assigned, within 30 calendar days after training is completed by all employees and subcontractor personnel.

START-UP PERIOD

All contractor resource onboarding documents must be submitted via the prime contractor. The prime contractor shall make all necessary preparations to assume full responsibility for productive performance as of the performance start date.

Definition of "productive":

a. OF-306 signed by contractor employee

b. FD-258 Fingerprint Card (Contingent upon availability of electronic fingerprinting submission)

c. Completed Electronic Investigation (e-QIP)

d. All contractor employees with need for a Common Access Card (CAC) must have an active Defense Information System for Security (DISS) profile.

e. Common Access Card (CAC)

f. DISS Visit Request submitted (Contingent upon classification of work being performed, Confidential, Secret, Top Secret).

Note (1): Invoicing by the contractor will begin as of the commencement of the performance period of services and no reimbursement will be paid by the government for efforts expended during the start-up period.

Note (2): Foreign Nationals are not allowed access to the functional/system side of Enterprise Resource Planning

(ERP).

ACCESS TO DOD INFORMATION TECHNOLOGY (IT) SYSTEM

In accordance with DON CIO Memorandum (IT LEVEL DESIGNATION ON DD FORM 2875 SYSTEM AUTHORIZATION ACCESS REQUEST) 08 September 2020, contractor employees who require access to Department of the Navy (DoN) or DoD networks are categorized as Privileged, Enhanced, or Authorized users. All user level accesses may include positions which require access to Controlled Unclassified Information (CUI). CUI includes sensitive information protected under the Privacy Act, to include Protected Health Information (PHI). IT System levels are determined by the requiring activity's Command Information System Security Manager (ISSM)/Information Assurance Manager (IAM).

Contractor employees requiring privileged access, (when specified by the terms of the contract) require a Tier 5 (T5) or T5R equivalent investigation, which is a higher level investigation than the Tier 3 (T3) and T3R described below.

Due to the privileged system access, an investigation suitable for High Risk national security positions is required.

Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance (IA) Technical Level 1, and must be trained and certified on the Operating System or Computing Environment they are required to maintain.

Contractors requiring Enhanced access, (when specified by the terms of the contract) require a T3, T3R, or equivalent investigation, which is a higher level investigation than the Tier 1 (T1) described below. Due to the enhanced system access, an investigation suitable for Moderate Risk national security positions is required.

Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee's duties, such employees shall in-process with the Navy CSM and ISSM/IAM manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual's performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy IT resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-N; therefore, the government employee with knowledge of the system/network access required or the Contracting Officers Representative (COR) shall sign the SAAR-N as the supervisor.

The SAAR-N shall be forwarded to the CSM upon contractor employee acquiring a Common Access Card (CAC) credential. Failure to obtain a CAC credential may result in delaying the individual's start date.

When required to maintain access to required IT systems or networks, the contractor shall ensure that all contractor employees requiring access complete annual Cyber Awareness training and maintain a current requisite background investigation. The contractor's security representative shall contact the CSM for guidance when reinvestigations are required.

INTERIM ACCESS

The CSM may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.

DENIAL OR TERMINATION OF ACCESS

The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.

ACCESS TO CONTROLLED UNCLASSIFIED INFORMATION

Safeguarding sensitive unclassified information is critical to achieve NAVSUP Modernization efforts and deliver cutting-edge and uncompromised capabilities. The Secretary of Defense’s operations security (OPSEC) campaign plan stresses the importance of protecting controlled unclassified information (CUI). CUI encompasses OPSEC, critical technology, intelligence, and personally identifiable information that, if not properly identified, marked, and controlled, could impair NAVSUP’s ability to conduct its mission. Contractor employees with access to Controlled Unclassified Information (CUI) shall comply with DoDI 5200.48 - Controlled Unclassified Information (CUI) and complete DoD approved initial and annual refresher CUI training.

a. Whenever Government provides CUI to, or CUI is generated by, non-DoD entities, all CUI records must be handled as required by the approved mandatory disposition authority.

b. All CUI records must follow the approved mandatory disposition authority whenever the Government provides CUI to, or CUI is generated by, non-DoD entities in accordance with Section 1220-1236 of Title 36, CFR, Section 3301a of Title 44, U.S.C., and the DoDI 5200.48.

c. Contractor employees shall monitor CUI aggregation and compilation based on the potential to generate classified information pursuant to security classification guidance addressing the accumulation of unclassified data or information

d. Contractor employees shall submit unclassified government information for review and approval for release in accordance with the Standard DoD Component Processes, DoDI 5230.09, and DoDM 5205.07, Volume 1.

CONTRACTOR'S SECURITY REPRESENTATIVE

The contractor shall designate an employee to serve as the contractor's security representative. Within three (3) work days after contract award, the contractor shall provide to the requiring activity's Security Manager and the Contracting Officer, in writing, the name, title, address and phone number for the contractor's security representative. The contractor's security representative shall be the primary point of contact on any security matter.

The contractor's security representative shall not be replaced or removed without prior notice to the Contracting Officer and CSM.

BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR

CONTRACTORS ASSIGNED TO NATIONAL SECURITY POSITIONS OR PERFORMING SENSITIVE

DUTIES

Navy security policy requires that all positions be given a sensitivity value based on level of risk factors to ensure appropriate protective measures are applied.