2 - Data Requirements.pdf
PDF 1006 KB Posted
- Attached to
- Pipette Calibration System
- Solicitation number
- FA226326Q0003
About this file
This document is a Contract Data Requirements List (CDRL) consisting of three data items required under a federal contract for the Pipeline Calibration System. The contract is referenced as PD 26M-632A-MA Atch, with the requiring office listed as AFI CMC/ROMM. The contractor must submit all deliverables on CD/DVD in indexed Portable Document Format (iPDF) unless otherwise specified.
The first data item (A001) is the Commercial-Off-The-Shelf (COTS) Manual, governed by specification DI-TMSS-80527D. The manual must contain all technical information on assembly, installation, operation, parts, and maintenance of commercial equipment. The contractor shall furnish one copy of the final manual concurrent with delivery of the first production unit, with submission required as of Block 16 date. The second data item (A002) is a Technical Data Package (TDP) per specification DI-SESS-80776B, to be delivered concurrent with the first production unit. The TDP must include two-dimensional (2D) engineering drawings in accordance with MIL-STD-31000B paragraph 5.4.1.4, submitted on CD/DVD in iPDF format. The third data item (B001) is an additional COTS Manual per DI-TMSS-80527D, requiring three copies to be shipped with each production unit. All deliverables must comply with the stated technical standards and submission formats, with maximum copy quantities subject to modification through contract change orders.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
a. ADDRESSEE Draft
Reg
PREVIOUS EDITION MAY BE USED. Page ofDD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ 9. DIST STATEMENT
REQUIRED
10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
8. APP CODE 11. AS OF DATE 13. DATE OF SUBSEQUENT
SUBMISSION Draft
Final
Reg Repro
16. REMARKS
15. TOTAL
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
18. ESTIMATED
TOTAL PRICE
17. PRICE GROUP
Attachment 2
DATA ITEM DESCRIPTION
Title: COMMERCIAL OFF-THE-SHELF (COTS) MANUALS AND
ASSOCIATED SUPPLEMENTAL DATA
Number: DI-TMSS-80527D AMSC Number: 10283 DTIC Applicable: No Office of Primary Responsibility: TM
Applicable Forms: None
Approval Date: 20211203 Limitation: No GIDEP Applicable: No
Use/relationship: Commercial Off-the-Shelf Manuals may be used as-is or with supplementation to support COTS equipment used by DOD. This DID is used to:
a. Acquire sample COTS manuals for evaluation.
b. Acquire COTS manuals that have been evaluated and found to be acceptable.
c. Acquire associated supplemental data, if required.
This DID contains format, content, and intended use information for the data deliverable(s) resulting from the work described in MIL-PRF-32216.
This DID supersedes DI-TMSS-80527C, dated 12 Aug 2011.
Requirements:
1. Content. The manual shall contain all technical information on the assembly, installation, operation, parts, and maintenance of commercial equipment.
2. Evaluation. The manual shall be evaluated using the criteria found in MIL-PRF-32216.
3. Supplementation. The manual may be supplemented with additional data to comply with contract.
Supplemental data shall be prepared in accordance with MIL-PRF-32216.
4. Format. The basic manual shall be presented in the contractor's format. Supplemental data shall be presented in the format specified by the acquiring activity.
5. Digital files. Interactive Electronic Technical Manuals (IETMs) or PDFs are preferred for electronic COTS manuals.
6. PDF Files. PDF files shall be searchable, capable of having links added, and have fonts embedded.
7. IETMs. IETMs shall meet the general style and format and user interface requirements in MIL- STD-40051-1 (Army only) or MIL-STD-3031 (Army only).
8. Paper manuals. If paper manuals are acquired, the data shall be clearly legible and on paper of sufficient quality for long term use.
9. Quick Reference Guides (QRGs). QRGs shall meet the requirements of MIL-PRF-32614.
End of DI-TMSS-80527D
DATA ITEM DESCRIPTION
Title: TECHNICAL DATA PACKAGE (TDP)
Number: DI-SESS-80776B Approval Date: 20190801
AMSC Number: 10057 Limitation:
DTIC Applicable: No GIDEP Applicable: No Preparing Activity: MI Project Number: SESS-2019-028 Applicable Forms:
Use/relationship: A TDP is the authoritative technical description of an item which is clear, complete, and accurate, and in a form adequate for its intended use. This technical description supports the acquisition, production, inspection, engineering, and logistics of the item. The description defines the design, configuration, performance requirements, and procedures necessary to ensure essential interface and effective item performance. It consists of applicable technical data, such as: models, drawings, associated lists, engineering design data, specifications, standards, performance requirements, quality assurance provisions, software documentation, and packaging detail.
a. This Data Item Description (DID) contains the format, content, and intended use information for the data deliverable resulting from the work task described in paragraph 5.4 TDP elements, MIL-STD- 31000B, Technical Data Packages (available online at https://quicksearch.dla.mil), to the extent required by the contract.
b. This DID supersedes DI-SESS-80776A.
Requirements:
1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.
2. Format. Deliverable TDP elements shall be in the Government’s format as specified on the TDP Option Selection Worksheet incorporated into the contractor or purchase order, or contractor format.
3. Content. The TDP shall include one or more of the following elements:
a. Conceptual engineering design data in accordance with MIL-STD-31000B paragraph 5.4.1.1,
b. Developmental engineering design data and associated lists in accordance with MIL-STD- 31000B paragraph 5.4.1.2,
c. Product engineering design data and associated lists in accordance with MIL-STD-31000B paragraph
5.4.1.3. The product design data shall document directly or by reference the following, as applicable:
(1) Details of unique processes, i.e., not published or generally available to industry, when essential to design and manufacture.
(2) Performance ratings.
(3) Dimensional and tolerance data.
(4) Critical manufacturing processes and assembly sequences.
(5) Toleranced Input and output characteristics
Source: http://assist.dla.mil -- Downloaded: 2024-10-29T12:45Z Check the source to verify that this is the current version before use.
( 6) Diagrams
(7) Mechanical and electrical connections.
(8) Physical characteristics, including: form, finishes, and protective coatings.
(9) Details of material identification, including material condition, and mandatory treatments and coatings.
(10) Inspection, test, and evaluation criteria.
( 11) Equipment calibration requirements.
(12) Quality assurance requirements.
(13) Qardware marking requirements.
( 14) All required certifications, special inspections, and other environmental, operational and functional testing necessary to ensure intended performance.
(15) Vendor substantiation data.
(16) Requirements for programming software into devices or assemblies including: a description of the input media and procedures for validating that the software has been installed correctly.
(17) Special consideration items and processes.
d. Commercial engineering design data and associated lists in accordance with MIL
STD-31000B paragraph 5.4.1.4,
e. Special Inspection Equipment, (SIE) engineering design data and associated lists in accordance with MILSTD-3 l000B paragraph 5.4.2.
f. Special Tooling (ST) engineering design data and associated lists in accordance with MIL
STD-3 lO00B paragraph 5.4.3,
g. Specifications in accordance with MIL-STD-3 lO00B paragraph 5.4.4,
h. Software documentation in accordance with MIL-STD-31 000B paragraph 5 .4.5,
1. Special Packaging Instructions (SPI) engineering design data and associated lists in accordance with
MIL-STD-31000B paragraph 5.4.6,
j. Quality Assurance Provisions (QAPs) in accordance with MIL-STD-3 lO00B paragraph 5.4.7.
End of DI-SESS-80776B.
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages Attachment 2
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages Attachment 2
| CDRL A001 |
| CDRL A002 |
| CDRL B001 |
File details come from the government source that posted it. Updated .