2 Combined Synopsis Attachment NRMA00002300922.pdf

NRMA00002300922SML

COMBINED SYNOPSIS/SOLICITATION

Non-personal Services for Engine Installation on National Oceanic and Atmospheric Administration (NOAA) Vessel R5503

(I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

(II) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number NRMA00002300922SML.

(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04 (JUN 2023) (Deviation 2023-09) (JUN 2023).

(IV) This solicitation is being issued as a total Small Business Set-Aside. The associated NAICS code is 336611. The small business size standard is 1,300 employees.

(V) This combined solicitation/synopsis is for purchase of the following commercial services:

CLIN 0001

Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for Engine Installation on National Oceanic and Atmospheric Administration (NOAA) Vessel R5503 for the Great Lakes Environmental Research Laboratory (GLERL) located in Muskegon, MI, in accordance with the Statement of Work. Period of Performance date of award through May 1, 2024.

(VI) Description of requirements is as follows:

See attached Statement of Work, and Department of Labor Wage Rates: WD 2015-4833, Revision No.

23, dated 06/30/2023, which can be found on: https://sam.gov/content/wage-determinations

STATEMENT OF WORK

National Oceanic and Atmospheric Administration (NOAA) Oceanic and Atmospheric Research (OAR)

Great Lakes Environmental Research Laboratory (GLERL)

PURPOSE:

The NOAA/OAR/GLERL needs non-personal services to install NOAA vessel R5503 with new engines, marine gears, and control systems.

SCOPE OR MISSION:

We are a multidisciplinary environmental research laboratory that provides scientific understanding to inform the use and management of Great Lakes and coastal marine environments. The R/V 5503 is an integral part of our research on the Great Lakes.

BACKGROUND:

These items will replace the existing engines, gears and controls on the R5503 research vessel. Due to the age of the existing engines, gears and controls, the critical research operations conducted aboard the RV 5503 have been hampered due to the speed of the vessel, as well as down time incurred due to age.

https://sam.gov/content/wage-determinations

OBJECTIVES:

To repower R5503 with new equipment, enhancing the overall efficiency of the research vessel. The Contractor shall install engines previously purchased for this project with the necessary controls and connections to vessel infrastructure.

NOAA R5503 GENERAL CHARACTERISTICS:

Length: (LOA) 58’4” Beam 16’9” Draft 5’10” Displacement 74,066 lbs

Design: USCG ANB

Builder: Director 1994

NOAA conversion – 2007

SPECIFIC TASKS:

1. Vessel Staging

1.1 Vessel is currently in operational condition and will be supporting operations until Oct 15 2023. NOAA will transit vessel to the contractors facility.

1.2 Move vessel to indoor facility or temporary enclosure for the duration of the project to ensure security and protection from elements.

2. Project Management

2.1 Provide project management tools and coordinate regular meetings to communicate project timeline, milestones, completion and cost tracking.

2.2 Provide timely notification of conditions found that impact the completion of this project or the integrity of the vessel and its systems. Provide suggested corrective actions and alternatives for consideration and approval from the government contracting officer.

2.3 Develop an engineering plan that encompasses all elements of the project scope.

2.4 Provide drawings, manuals and technical data for contractor supplied equipment or assemblies.

3. Systems Disconnect and Removal of Existing Engines

3.1 Use the aft deck hatches for ER access and equipment removal. Any additional modifications or removal of interferences must be returned to as found conditions.

3.2 Existing Glendinning engine controls must be carefully removed and returned for use on other vessels. Remove wiring and gauges associated with existing engines.

3.3 Connections with existing fire suppression, fuel, raw water, AC / DC electrical, hydraulics and exhaust must be maintained for potential reuse and integration with new equipment.

3.4 Engines and marine gears must be properly disposed of, or staged for shipment as directed by Government representatives. Contractor shall provide the weight removed engine and gear assemblies.

3.5 Propellers shall be loaded on a government truck for service off site during the repower project. Propellers shall be returned to meet contractors project timeline.

3.6 Upon removal of shafts, load on a Government truck for service off site during the repower project. Shafts shall be returned to meet the contractors project timeline.

3.7 Upon removal of the rudders, provide a condition report on the rudder shafts and bearings.

3.8 Upon removal of the shafts, remove strut and stern tube bearings. Provide required bearing dimensions to the Government for procurement of replacement bearings. Prepare surfaces for installation of new bearings. Bearings will be provided by the Government.

3.9 Bilges, bulkheads and overheads shall be cleaned. Any nonessential legacy wiring, plumbing and brackets shall be removed. Acoustic insulation shall be replaced if damaged or removed.

4. New Engine Installation and Connections

4.1 Engineering, workmanship and materials shall be in accordance with applicable industry standards, USCG regulations and best management practices.

4.1 Modify the existing bed rails to accommodate the new engine mounts and shaft angle.

4.3 Modify foundations to accommodate new marine gears.

4.4 Fabricate and install a frame to hold ballast plates under each engine. Procure and install steel ballast plates and proper isolation material. Ballast weights is 500# under each engine.

4.5 Install Government provided strut bearings. Replace stern tube hose and packing. Materials provided by the Government.

4.6 Set and align engines/gears to engine manufacturer’s approval and isolator mount specifications. Final documentation of alignment and isolator mount installation shall be provided. Final alignment must be documented after launch.

4.7 Machine companion flanges to accept shafts.

4.8 Reconnect to the fuel system. New lines will be required from the filters to engines and engines to return piping.

4.9 Reconnect to raw water sea chest. New 2 ½ ID Trident reinforced hose shall be installed from strainers to engines. ( approximately 12’ run ea.)

4.10 Cooling water from the engines shall be run in 2 ½” Trident hose. After existing the oil cooler, a 2” inch hose overboard discharge and throttling valve shall be installed. Location of the discharge shall be determined by the Government Representative.

4.11 Reconnect to existing exhaust silencers. Fabricate exhaust piping to minimize back pressure and allow for flex couplings. Government will provide flex hump hoses at silencer connection.

Contractor shall provide exhaust flex coupling at turbo. Isolation hangers shall be used in supporting the exhaust assembly. Provide a drawing and dimensions of exhaust runs to support GOV acquisition of insulation lagging blankets.

4.12 Reconnect to fire suppression system, alarms and GOV provided engine shutdown system.

4.13 Reconfigure existing 24V starting batteries to meet the requirements of the engine manufacturer and EC600 controls. Include automatic power transfer switches as required.

4.14 Install power switches on each engine at port and starboard engine bed rails. Batteries are located on centerline under grating.

4.15 Reconnect the GOV provided steering hydraulic pump to PTO drive on the starboard engine.

Provide new hydraulic hoses and secure.

4.16 Restore any impacted ER grating, bulk heads, over heads, support and ancillary equipment that may have been altered or impacted in the scope of this project.

5. Engines, Gears and Controls

5.1 The Government will supply the engines, gears, mounts and controls as detailed in the attachment.

5.2 Contractor shall review the engine, gear and controls detailed in the attachment and provide government rep with recommendations, deficiencies and concerns with that equipment list.

5.3 Upon engineering review, contractor shall work with equipment manufactures to ensure that installation meets OEM requirements and industry standards. This includes torque values on engine brackets and compliance to isolation mount specifications.

5.4 Engine controls shall be routed, installed and integrated at the helm and aft station to industry standards and government approval. Government will provide the EC600 control package and interconnecting cables. Junction boxes shall be located on the shop space aft bulkhead, forward of the ER.

5.5 Installation, testing and sea trial performance must meet the equipment manufacturer’s approval.

6. Launch

6.1 Contractor shall coordinate launch date with Government crews, engine and gear manufacturer representatives.

6.2 Upon launch, engine alignment must be documented. Contactor shall confirm proper installation and operation of all impacted and newly installed equipment prior to scheduled sea trials.

6.3 Contractor shall provide a schedule of activities and provide access to the vessel so that Government crew and install and inspect safety and navigation equipment prior to underway trials.

7. Sea Trials and Commissioning

7.1 The Government shall provide fuel, engine coolant, lubrication and hydraulic oils as needed.

7.2 Conduct dockside and sea trails that test all vessel systems that were impacted in the scope of this project. This shall be done in a coordinated effort with the equipment manufacturer representatives and Government crew.

7.3 Contractor shall participate in sea trials to test and document the performance of installed equipment and must meet manufacturer's stated specifications and industry standards. This shall include engine loading, horse power, and heat / vibration measures across the RPM range. TVA testing is covered in the engine supplier package. All engine and gear parameters shall be tested, recorded and must meet manufacturer’s approval.

7.4 Safety, fire suppression and control systems shall be tested and verified. Any deficiencies impacted by the scope of this project shall be corrected.

7.5 The vessel shall be measured for dead weight after all systems are installed and in operational condition. This can be provided by the lift crane load instrumentation.

7.6 Training on all installed systems shall be provided to government crews. This shall include system configuration, operation and maintenance. Support documentation, drawings and manuals for installed equipment shall be provided.

SPECIAL REQUIREMENTS:

After final installation of the engines, the provider of the engines will be required to conduct a vibration analysis (TVA).

GOVERNMENT SUPPLIED MATERIALS:

1. John Deere / TwinDisc package - 6135ASM85/MGX5126A (2)

2. EC 600 control system - engine, helm and aft stations w/ interconnecting cables

3. Stern Tube and strut Bearings - NSN 3120-01-131-3692 (4)

4. Stuffing Box hose - NSN 4720-01-412-7811 (2)

5. Steering pump (1)

6. Engine oil, coolant and hydraulic oil

7. Exhaust hump hose connection (2)

(VII) Date(s) and place(s) of delivery and acceptance:

Period of performance shall be Date of Award through May 1, 2024.

Place of Performance: Work is to be performed at other than the Government facility. (E.g., at the vendor’s facility)

(VIII) FAR 52.212-1, INSTRUCTIONS TO OFFERORS – COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAR 2023), applies to this acquisition.

NOTICE TO OFFERORS: Instructions for submitting quotations under this request for quote must be followed. Failure to provide all information to aid in the evaluation may be considered non-responsive.

Offers that are non-responsive may be excluded from further evaluation and rejected without further notification to the offeror.

1. Submit PDF or Microsoft Word format quotations to the office specified in this solicitation at or before the time specified in the solicitation. Email quotes are required and can be sent to Stephanie.Long@noaa.gov.

2. Offeror shall have an active registration in the System for Award Management (SAM found at https://sam.gov/content/home) in order to provide a quote and be eligible for award. Must provide their UEID/CAGE CODE with their quote.

3. Offerors shall assume that the Government has no prior knowledge of them or their capability.

4. Offerors must provide all evaluation criteria in accordance with FAR 52.212-2. Offerors who do not provide all evaluation criteria will not be accepted.

https://sam.gov/content/home

1. Technical Approach and Capability.

The Offeror’s overall technical approach will be evaluated to assess the Government's level of confidence in the Offeror’s understanding of, approach to, and ability to successfully perform the requirements as described in the Statement of Work. Provide a detailed description of the company’s experience performing similar services. A detailed technical approach write-up describing how the Offeror will perform this service is required to be submitted with the quote regardless of whether a site visit was made or not. The technical approach write-up must not be a reiteration of the Statement of Work, but how your company plans on performing the tasks listed in the attached Statement of Work. (i.e. performance checklists, anticipated number of employees, anticipated hours at the facility and/or confirmation of supplies being provided, etc.)

2. Past Performance.

The Offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the Offeror, the agency’s knowledge of Offeror performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services. Quote shall include at least two references for similar and relevant services including the phone number, full address, and e-mail address.

Offerors lacking relevant past performance history, or for whom past performance information is either not available or has not been submitted to the Government, will receive a neutral rating for past performance.

3. Price.

The Government will evaluate the price quote for completeness and reasonableness in relation to the RFQ requirements. Quoted prices must be entirely compatible with the Non- Price Technical Solution.

(IX) FAR 52.212-2, EVALUATION- COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(NOV 2021), applies to this acquisition. Offers will be evaluated based on price and the factors set forth in paragraph (a).

The evaluation will consider the Non-Price Technical Solution (Technical Approach and Past Performance) to be significantly more important than price. However, as quotes are determined to be more equal in the non-price evaluation factor, price becomes more important and may become the determining factor for award. If, at any stage of the evaluation, all vendors are determined to have submitted equal, or virtually equal, Non-Price Technical Solutions, price could become the factor in determining which vendor will receive the award.

The Government intends to evaluate the quotes and award a purchase order based on the Offeror’s initial quote; therefore, the Offeror’s initial quote should contain the Offeror’s best terms from a Non-Price Technical Solution and price standpoint.

The Government reserves the right not to award a purchase order depending on the quality of the quote(s) submitted and the availability of funds. Furthermore, the Government may waive informalities and minor irregularities or omissions in quotes received.

The Government may make award to other than the lowest-priced Offeror or the Offeror with the highest technical rating if the Contracting Officer determines that to do so would result in the best value to the Government. The Government will not make an award at a significantly higher overall price to achieve only slightly superior performance capability.

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered.

Paragraph (a) is hereby completed as follows: Evaluation will be based on the following:

1. Technical Approach and Capability.

The Offeror’s overall technical approach will be evaluated to assess the Government's level of confidence in the Offeror’s understanding of, approach to, and ability to successfully perform the requirements as described in the Statement of Work. Provide a detailed description of the company’s experience performing similar services. A detailed technical approach write-up describing how the Offeror will perform this service is required to be submitted with the quote regardless of whether a site visit was made or not. The technical approach write-up must not be a reiteration of the Statement of Work, but how your company plans on performing the tasks listed in the attached Statement of Work. (i.e. performance checklists, anticipated number of employees, anticipated hours at the facility and/or confirmation of supplies being provided, etc.)

2. Past Performance.

The Offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the Offeror, the agency’s knowledge of Offeror performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services. Quote shall include at least two references for similar and relevant services including the phone number, full address, and e-mail address.

Offerors lacking relevant past performance history, or for whom past performance information is either not available or has not been submitted to the Government, will receive a neutral rating for past performance.

3. Price.

The Government will evaluate the price quote for completeness and reasonableness in relation to the RFQ requirements. Quoted prices must be entirely compatible with the Non- Price Technical Solution.

The Government intends to award a trade-off, single firm fixed-price purchase order on an all or none basis with payment terms of Net 30.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

"THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NON-RECEIPT OF QUOTES.

IT IS THE OFFEROR'S RESPONSIBILITY TO REQUEST AND RECEIVE A CONFIRMATION OF

THE QUOTE RECEIPT".

CAR 1352.215-72 INQUIRIES (APR 2010)

OFFERORS MUST SUBMIT ALL QUESTIONS CONCERNING THIS SOLICITATION IN WRITING

VIA EMAIL TO STEPHANIE.LONG@NOAA.GOV. QUESTIONS SHOULD BE RECEIVED NO

LATER THAN 12:00PM MST/MDT ON AUGUST 1, 2023. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation.

Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.

(End of clause)

(X) FAR 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES (DEC 2022) (DEVIATION 2023-03) (DEC 2022),

applies to this acquisition.

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision—

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204- 25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

https://www.sam.gov/ https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/section-127.300

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110- 174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title6-section395&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_204_25

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"—

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veteransor, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16).

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships.

SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section101&num=0&edition=prelim https://www.ecfr.gov/current/title-13/part-121 https://www.ecfr.gov/current/title-13/part-121

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $850,000 (DEVIATION 2023-03) after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name.

The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C.

101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women

Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) https://www.ecfr.gov/current/title-13/part-127 https://www.ecfr.gov/current/title-13/section-127.300 http://www.sam.gov/ https://www.acquisition.gov/far/part-52#FAR_52_212_3 referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that—

(i) It □ is, □ is not a small business concern; or

(ii) It □ is, □ is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: __.]

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it □ is, □ is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [ Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that—

(i) It □ is, □ is not a service-disabled veteran-owned small business concern; or

(ii)It □ is, □ is not a joint venture that complies with the requirements of 13 CFR 125.18(b)(1) and (2). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: __.] Each service-disabled veteran-owned small business concern participating in the joint venture shall provide representation of its service-disabled veteran-owned small business concern status.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it □ is, □ is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is, □ is not a women-owned small business concern.

(6) WOSB joint venture eligible under the WOSB Program. The offeror represents that it □ is, □ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c).

[ The offeror shall enter the name and unique entity identifier of each party to the joint venture: __.]

(7) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it □ is, □ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: __.] https://www.acquisition.gov/far/part-4#FAR_4_1201 https://www.acquisition.gov/far/part-19#FAR_Part_19 https://www.acquisition.gov/far/part-19#FAR_19_000 https://www.ecfr.gov/current/title-13/section-121.103#p-121.103(h) https://www.ecfr.gov/current/title-13/section-121.103#p-121.103(h) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(a) https://www.ecfr.gov/current/title-13/section-125.8#p-125.8(b) https://www.ecfr.gov/current/title-13/section-125.18#p-125.18(b)(1) https://www.ecfr.gov/current/title-13/section-125.18#p-125.18(b)(1) https://www.ecfr.gov/current/title-13/section-125.18#p-125.18(b)(2) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(a) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(c) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(a) https://www.ecfr.gov/current/title-13/section-127.506#p-127.506(c)

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it □ is a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–

(i) It □ is, □ is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It □ is, □ is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: __.] Each HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(d) Representations required to implement provisions of Executive Order11246-

(1) Previous contracts and compliance. The offeror represents that-

(i) It □ has, □ has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It □ has, □ has not filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that-

(i) It □ has developed and has on file, □ has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It □ has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 http://uscode.house.gov/ U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.)

By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants.

The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

https://www.ecfr.gov/current/title-13/section-126.200 https://www.ecfr.gov/current/title-13/section-126.616#p-126.616(a) https://www.ecfr.gov/current/title-13/section-126.616#p-126.616(a) https://www.ecfr.gov/current/title-13/section-126.616#p-126.616(c) http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.)

(1)

(i) The Offeror certifies that each end product and that each domestic end product listed in paragraph (f)(3) of this provision contains a critical component, except those listed in paragraph (f)(2) of this provision, is a domestic end product.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(iii) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(iv) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” “domestic end product,” "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(2) Foreign End Products:

Line Item No. Country of Origin Exceeds 55% domestic content (yes/no)

[List as necessary]

(3) Domestic end products containing a critical component:

Line Item No. ___

[List as necessary]

(4) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(g)

(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.)

(i)

(A) The Offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (iii) of this provision, is a domestic end product and that each domestic end product listed in paragraph (g)(1)(iv) of this provision contains a critical component.

(B) The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end https://www.acquisition.gov/far/part-52#FAR_52_225_1 https://www.acquisition.gov/far/part-25#FAR_Part_25 https://www.acquisition.gov/far/part-52#FAR_52_225_3 product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements- Israeli Trade Act."

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

Line Item No. Country of Origin

[List as necessary]

(iii) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American- Free Trade Agreements-Israeli Trade Act." The Offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

Other Foreign End Products:

Line Item No. Country of Origin Exceeds 55% domestic content (yes/no)

[List as necessary]

(iv) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

Line Item No. ___

[List as necessary]

(v) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

https://www.acquisition.gov/far/part-25#FAR_25_105 https://www.acquisition.gov/far/part-52#FAR_52_225_3

Israeli End Products:

Line Item No.

[List as necessary]

(3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III.

If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

Line Item No. Country of Origin

[List as necessary]

(4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements."

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products:

Line Item No. Country of Origin

[List as necessary]

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-https://www.acquisition.gov/far/part-52#FAR_52_225_3 https://www.acquisition.gov/far/part-52#FAR_52_225_5 made or designated country end products without regard to the restrictions of the Buy American statute.

The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals–

(1) □ Are, □ are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(2) □ Have, □ have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property;

(3) □ Are, □ are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and

(4) □ Have, □ have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds the threshold at 9.104-5(a)(2) for which the liability remains unsatisfied.

(i) Taxes are considered delinquent if both of the following criteria apply:

(A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted.

(B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded.

(ii) Examples.

(A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability.