The file's text, extracted by GovTribe without its formatting.
SECTION A
SEE SF-1442 ATTACHED
SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS
B.1
SCOPE OF SERVICES
The Contractor shall provide personnel, supplies and equipment for all make-ready services for residences for U.S Embassy Lusaka as described in Sections B and C of this contract, and the exhibits in Section J.
B.2
TYPE OF CONTRACT
This is an indefinite-delivery, indefinite-quantity type contract for make-ready. The Contractor shall furnish services according to task orders issued by the Contracting Officer. Oral task orders maybe necessary for emergencies, however, they shall be issued in writing within three days after issuance of the oral instructions. The task orders shall specify the location and type of work requested (see Section B.4 and the example in Section J, Exhibit 2).
The contract will be for a one-year period from the date of the contract award, with 4 (four) one-year options. For each effective year of the contract, the U.S. Government guarantees a minimum order of one thousand United States dollars ($1,000.00) worth of services. The maximum amount of services ordered under each year of the contract will not exceed hundred and fifty thousand United States dollars ($150,000.00) worth of services.
B.3
PRICES/COSTS
The prices will include all work, including furnishing all labor, materials, equipment and services, unless otherwise specified in Section B.4.4. The prices listed below shall include all labor, materials, direct and indirect costs, insurance (see FAR 52.228-3 and 52.228-5), overhead, and profit.
B.3.1 VALUE ADDED TAX
VALUE ADDED TAX (VAT). The Government will not reimburse the Contractor for VAT under this contract. The Contractor shall not include a line for VAT on Invoices as the U.S. Embassy has a tax exemption certificate with the host government.
B.3.2
CURRENCY
All prices shall be in ______________________ (offeror to identify currency)
B.3.3 BASE YEAR PRICES (starting on the date stated in the Notice to Proceed and continuing for a period of 12 months)
| Item |
| Description |
| Unit |
| Quantity |
| Rate |
| Amount |
| 1.1 |
| Demolish existing concrete slab, remove debris from site and cart away to contractor's dump site(average thickness 150mm) |
| m³ |
| 7 |
| 1.2 |
| Demolish existing masonry wall including plaster, remove debris from site and cart away to contractor's dump site |
| m² |
| 70 |
| 1.3 |
| Carefully remove roof covering and all damaged purlin and roof structure, remove debris from site and cart away to contractor's dump site |
| m² |
| 60 |
| 1.4 |
| Remove existing gutters ,remove debris from and cart away to contractors dump site |
| m |
| 150 |
| 1.5 |
| Remove existing fascial board, remove debris from site and cart away to contractor’s dump site |
| m |
| 150 |
| 1.6 |
| Remove all existing wall tiles, remove debris from site and cart away to contractor's dump site |
| m |
| 60 |
| 1.7 |
| Remove all existing floor covering, remove debris from site and cart away to contractor's dump site |
| m² |
| 200 |
| 1.8 |
| Remove existing door frames including lintol , remove debris and hand over frame to client or cart away to contractor’s dump site |
| each |
| 15 |
| 1.9 |
| Remove existing window frames including lintol , remove debris and hand over frame to client or cart away to contractor's dump site |
| lot |
| 7 |
| 1.10 |
| Remove existing bathtub ,wash hand basin and toilet pan, clean drain and hand over to the COR |
| lot |
| 8 |
| 1.11 |
| Remove all plumbing piping , remove debris and cart away to contractor’s dump site |
| lot |
| 8 |
| 1.12 |
| Removing existing particle board/gypsum board ceiling including blundering, remove debris and cart away. |
| m² |
| 150 |
| 1.13 |
| Remove existing wall cabinets and hand over to the COR |
| lot |
| 7 |
| 1.14 |
| Remove existing curtain rails and supports. Hand over to the COR |
| m |
| 100 |
| 1.15 |
| Carefully remove all distribution panel boards including all cabling and take away from site |
| lot |
| 7 |
| 1.16 |
| Carefully remove all electrical light fittings including switches and cabling and take away from site |
| lot |
| 7 |
| 1.17 |
| Carefully remove all sockets including all cabling and take away from site |
| lot |
| 7 |
| 2.1 |
| Supply and cast plain concrete grade 20/20 mm aggregate. |
| m³ |
| 10 |
| 2.2 |
| Supply and cast vibrated reinforced concrete grade 25/20 mm aggregate. |
| m³ |
| 8 |
| 2.3 |
| Supply and lay deformed steel bars reinforcement (varies sizes) |
| kg |
| 100 |
| 2.4 |
| Supply and lay steel mesh fabric reinforcement conforce 257 allowing 200mm lap at joints |
| m² |
| 20 |
| 2.5 |
| Supply and lay steel mesh fabric reinforcement conforce 86 allowing 200mm lap at joints |
| m² |
| 25 |
| 2.6 |
| Formworks for sides of columns, steps edges of the beds |
| m² |
| 120 |
| 2.7 |
| Repair crack concrete screed chip off 25mm wide V joint seal with cement grout |
| m |
| 60 |
| 3.1 |
| Clear site of works of shrubs, bushes and trees |
| m² |
| 50 |
| 3.2 |
| Excavate around foundation not exceeding 1m deep |
| m³ |
| 10 |
| 3.3 |
| Excavate to remove top soil and load and cart away to contractors tipping site average depth 150mm |
| m² |
| 70 |
| 3.4 |
| load and cart away surplus spoil to contractor’s dump site |
| m³ |
| 60 |
| 3.5 |
| Backfill and compact in layers not exceeding 150mm |
| m³ |
| 90 |
| 3.6 |
| Supply and install 500 gauge polythene laid under surface beds |
| m² |
| 90 |
| 3.7 |
| Apply approved ant termite treatment |
| m² |
| 90 |
| 4 |
| MASONRY SERVICES (See section C.2.11) |
| 4.1 |
| Erect hollow block walling (3.5N/m2 crushing strength) in cement mortar allow for brick force reinforcement every 3 courses |
| 4.2 |
| Erect Solid block/brick walling (5.0N/m2 crushing strength) in cement mortar and allowing for brick force reinforcement every 3 courses |
| 4.3.1 |
| Cement/sand (1:4) external rendering 20mm thick in wood float finish |
| m² |
| 100 |
| 4.3.2 |
| Cement/sand (1:3) internal rendering 20mm thick in steel trowelled smooth finish |
| m² |
| 100 |
| 4.3.3 |
| Plaster to reveal and returns |
| m |
| 100 |
| 4.4 |
| Beam filling between wall and roof |
| m |
| 100 |
| 4.5 |
| Supply and install 14g standard pressed steel door frame, double rebated including hinges, masonry, jamps and striking plate. |
| each |
| 15 |
| 4.6 |
| Supply and install standard metal window frame size 1200x900mm complete with handle and stays |
| each |
| 15 |
| 4.7 |
| Supply and install standard metal window frame size 2400x900mm complete with handle and stays |
| each |
| 8 |
| 4.8 |
| Supply and install standard metal window frame size 900x600mm complete with handle and stays |
| each |
| 8 |
| 4.9 |
| Supply and install standard metal window frame size 1800x900mm complete with handle and stays |
| each |
| 8 |
| 4.10 |
| Supply and apply gypsum plaster in one coat skimming finish with a steel trowel |
| m² |
| 100 |
| 4.11 |
| Supply and install ceramic floor tiles (Grade AAA). Including grouting and sealing. |
| m² |
| 100 |
| 4.12 |
| Supply and install porcelain floor tiles. (Grade AAA) including grouting and grout sealing |
| m² |
| 100 |
| 4.13 |
| Supply and install ceramic wall tiles(Grade AAA) including grouting and sealing |
| m² |
| 300 |
| 4.14 |
| Cast and install 40mm floor screed in cement/ sand mix (1:3) |
| m² |
| 150 |
| 5 |
| CARPENTRY SERVICES (see Section C.2.8) |
| 5.1 |
| Supply and install 0.5mm IBR factory painted roof sheeting including nailing and insulation |
| m² |
| 100 |
| 5.2 |
| Supply and install clay/cement tiles including nailing |
| m² |
| 80 |
| 5.3 |
| Supply and install iron roof ridge |
| m |
| 100 |
| 5.4 |
| Supply and install roof ridge for clay/cement tiles |
| m |
| 25 |
| 5.5 |
| Supply and install metal gutter |
| m |
| 100 |
| 5.6 |
| Supply and install PVC ceiling including edge strips |
| m² |
| 150 |
| 5.7 |
| Supply and install 8mm particle board ceiling |
| m² |
| 100 |
| 5.8 |
| Supply and install sawn 50 x 50mm softwood blandering including supports |
| m |
| 300 |
| 5.9 |
| Supply and install wrought softwood 225x25 mm fascias board |
| m |
| 200 |
| 5.10 |
| Supply and install 100mm half round PVC gutter |
| m |
| 150 |
| 5.11 |
| Supply and install 150mm half round PVC gutter |
| m |
| 150 |
| 5.12 |
| Supply and install 100mm down pipes including connection to gutter ,end outlets and wall supports |
| m |
| 60 |
| 5.13 |
| Supply and install standard aluminum window complete with locking, flyscreen’s and 6mm glazing. |
| m² |
| 60 |
| 5.14 |
| Supply and install 45mm solid core flush doors |
| each |
| 30 |
| 5.15 |
| Supply and install 45mm hollow core flush doors |
| each |
| 15 |
| 5.16 |
| Supply and install 45mm mukwa/rosewood doors |
| each |
| 30 |
| 5.17 |
| Supply and install 3 lever mortice lock |
| each |
| 150 |
| 5.18 |
| Install government supplied dead bolt locks |
| each |
| 15 |
| 5.19 |
| Supply and install 150 X50mm rafters including painting with preservative |
| m |
| 200 |
| 5.20 |
| Supply and install 100 X 38mm rafters including painting with preservative and nailing |
| m |
| 200 |
| 5.21 |
| Supply and install 75 X50mm purlins including painting with preservative and nailing |
| m |
| 300 |
| 5.22 |
| Supply and Install shelving in cabinets using 18mm block boards |
| m² |
| 80 |
| 5.23 |
| Supply and Install double rod wooden curtain rails including supports size 2500m |
| each |
| 50 |
| 5.24 |
| Supply and Install double rod metal curtain rails including supports, |
| each |
| 50 |
| 5.25 |
| Supply and install suspended ceiling as 10mm rhinoboard or other equal approved plasterboard with skimmed plaster fixed already existing 50x50mm branders including joint tape and cornice |
| m² |
| 150 |
| 5.26 |
| Replace wooden framed screen door 2000 x900mm |
| each |
| 20 |
| 5.27 |
| Replace aluminum framed screen door 2000 x900mm |
| each |
| 20 |
| 5.28 |
| Replace fly screen including frame to windows 900x600mm |
| each |
| 60 |
| 5.29 |
| Supply and install door stopper |
| each |
| 200 |
| 5.30 |
| Supply and install parquet wood floor |
| m² |
| 200 |
| 5.31 |
| Supply and install 400x75x20mm teak wood floor |
| m² |
| 150 |
| 5.32 |
| Supply and install 400x75x20mm rosewood wood floor |
| m² |
| 100 |
| 5.33 |
| Supply and install 100mm x 20mm wood base board |
| m |
| 400 |
| 5.34 |
| Supply and install 75mm softwood cornice |
| m |
| 400 |
| 5.35 |
| Supply and install 40mm softwood cover strips |
| m |
| 250 |
| 5.36 |
| Supply install 100mm butt hinges complete with screws |
| each |
| 80 |
| 5.37 |
| Supply and install aluminum weather strips 900mm |
| each |
| 30 |
| 5.38 |
| Supply and install 6mm clear glass including putty |
| m² |
| 40 |
| 5.39 |
| Supply and install 3mm clear glass including putty |
| m² |
| 40 |
| 5.40 |
| Supply and install 6mm obscure glass including putty |
| m² |
| 15 |
| 5.41 |
| Supply and install 3mm obscure glass including putty |
| m² |
| 15 |
| 5.42 |
| Check and repair sticky hinges doors, drawers and sliding doors. Per house |
| lot |
| 14 |
| 5.43 |
| Clean chimneys and fireplaces per house |
| each |
| 10 |
| 5.44 |
| Replace 30mm granite counter tops 600mm |
| m |
| 25 |
| 5.45 |
| Replace cabinet hinges per house |
| each |
| 14 |
| 5.46 |
| Repair leaky roof using roof membrane /house |
| lot |
| 10 |
| 5.47 |
| Replace caulking around the bathtub and kitchen sink |
| m |
| 30 |
| 5.48 |
| Supply and install coat hooks |
| each |
| 20 |
| 5.49 |
| Supply and install soap holder |
| each |
| 20 |
| 5.50 |
| Supply and install toilet roll holder |
| each |
| 20 |
| 5.51 |
| Supply and install 25mm shower curtain rod complete with end brackets. |
| m |
| 25 |
| 5.52 |
| Supply and install insulation in the ceiling. |
| m² |
| 150 |
| 5.53 |
| Supply and install 1.6mm vinyl composition tile floor 300 x300mm including supply of adhesive. |
| m² |
| 80 |
| 5.54 |
| Supply and replace aluminum screen materials for doors or windows |
| m² |
| 80 |
| 5.55 |
| Supply and replace wooden door frame complete with trims |
| each |
| 20 |
| 5.56 |
| Supply and install quarter round wood mouldings |
| m |
| 100 |
| 6 |
| PLUMBING SERVICES (see Section C.2.5) |
| 6.1 |
| Check and test all plumbing fixtures and snake out all interior drain lines |
| lot |
| 8 |
| 6.2 |
| Replace 20mm CPVC water pipe complete with fittings fixed approved solvent |
| m |
| 500 |
| 6.3 |
| Replace 12mm CPVC water pipe complete with fittings fixed approved solvent |
| m |
| 500 |
| 6.4 |
| Replace kitchen double bowl sink |
| each |
| 8 |
| 6.5 |
| Replace swing kitchen faucet Cobra or similar quality |
| each |
| 10 |
| 6.6 |
| Replace P trap for kitchen sink |
| each |
| 20 |
| 6.7 |
| Replace wash hand basin of high quality |
| each |
| 15 |
| 6.8 |
| Supply and replace 12mm copper/flexi connector |
| each |
| 30 |
| 6.9 |
| Supply and replace 20mm copper/flexi connector |
| each |
| 30 |
| 6.10 |
| Supply and install 20mm CPVC gate valves |
| each |
| 150 |
| 6.11 |
| Supply and install 12mm CPVC gate valves |
| each |
| 150 |
| 6.12 |
| Supply and install connection from GI to CPVC 20mm |
| each |
| 40 |
| 6.13 |
| Supply and install connection from GI to CPVC 12mm |
| each |
| 40 |
| 6.14 |
| Supply and install 40mm PVC waste pipes complete with fitting. |
| m |
| 200 |
| 6.15 |
| Supply and install 50mm PVC waste pipes complete with fitting. |
| m |
| 200 |
| 6.16 |
| Supply and install 110mm PVC pipes complete with fittings |
| m |
| 400 |
| 6.17 |
| Supply and install telephone bath mixer 20mm |
| each |
| 20 |
| 6.18 |
| Supply and install 500x500 manhole cover |
| each |
| 15 |
| 6.19 |
| Supply and install shower valve and mixing assembly 20mm |
| each |
| 10 |
| 6.20 |
| Supply and install shower head |
| each |
| 20 |
| 6.21 |
| Supply and install toilet pan complete with cistern |
| each |
| 25 |
| 6.22 |
| Supply and install seat cover |
| each |
| 25 |
| 6.23 |
| Supply and install WHB mixer 12mm |
| each |
| 25 |
| 6.24 |
| Supply and install shower cubicle 1200x900 as supplied by Make a Home with tempered glass panels or similar |
| each |
| 10 |
| 6.25 |
| Supply and install bathtub 1700x600x450mm deep |
| each |
| 10 |
| 6.26 |
| Supply and install 6mm mirror complete with dome screws and caps |
| each |
| 20 |
| 6.27 |
| Chisel for piping in wall 50mm deep for pipes up 50mm |
| lot |
| 10 |
| 6.28 |
| Chisel for piping in slab 70mm deep for pipes up 50mm |
| lot |
| 10 |
| 6.29 |
| Chisel for piping through 100mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.30 |
| Chisel for piping through 150mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.31 |
| Chisel for piping through 200mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.32 |
| Supply and install 100 ltrs water heater |
| each |
| 20 |
| 6.33 |
| Service water heater by removing accumulation of scale, clean element with vinegar and re-install |
| lot |
| 10 |
| 6.34 |
| Supply and install 2KW heating element complete with thermostat. |
| each |
| 20 |
| 6.35 |
| Install valve labels |
| lot |
| 10 |
| 6.36 |
| Supply and install shut off valves 20mm |
| lot |
| 10 |
| 6.37 |
| Remove scale from mixers |
| lot |
| 10 |
| 7 |
| ELECTRICAL SERVICES (see Section C.2.6) |
| 7.1 |
| Replace existing light switches |
| each |
| 150 |
| 7.2 |
| Replace existing electrical outlets |
| each |
| 250 |
| 7.3 |
| Replace MCBs single pole 20Amps |
| each |
| 100 |
| 7.4 |
| Replace MCBs single pole 10Amps |
| each |
| 100 |
| 7.5 |
| Replace MCBs single pole 30Amps |
| each |
| 100 |
| 7.6 |
| Replace MCBs single pole 40Amps |
| each |
| 100 |
| 7.7 |
| Replace MCBs single pole 60Amps |
| each |
| 60 |
| 7.8 |
| Replace MCBs single pole 80Amps |
| each |
| 60 |
| 7.9 |
| Replace MCBs tripple pole 20Amps |
| each |
| 20 |
| 7.10 |
| Replace MCBs tripple pole 60Amps |
| each |
| 20 |
| 7.11 |
| Replace MCBs tripple pole 80Amps |
| each |
| 20 |
| 7.12 |
| Supply and install 1.5mm 2 cable red |
| m |
| 4000 |
| 7.13 |
| Supply and install 2.5mm 2 cable red |
| m |
| 4000 |
| 7.14 |
| Supply and install 4mm 2 cable red |
| m |
| 2500 |
| 7.15 |
| Supply and install 6mm 2 cable red |
| m |
| 1000 |
| 7.16 |
| supply and install 4 ft single fluorescent light fitting |
| each |
| 200 |
| 7.17 |
| supply and install 2 ft single fluorescent light fitting |
| each |
| 20 |
| 7.18 |
| supply and install 4 ft double fluorescent light fitting |
| each |
| 200 |
| 7.19 |
| supply and install 2 ft double fluorescent light fitting |
| each |
| 20 |
| 7.20 |
| supply and install recessed vapor barrier light fixture |
| each |
| 80 |
| 7.21 |
| Supply and install 6" spherical light fitting |
| each |
| 80 |
| 7.22 |
| Supply and install 8" spherical light fitting |
| each |
| 80 |
| 7.23 |
| Install government supplied chandelier |
| each |
| 20 |
| 7.24 |
| Install government supplied ceiling fan |
| each |
| 30 |
| 7.25 |
| Install government supplied GFCI socket outlets |
| each |
| 30 |
| 7.26 |
| Install government supplied door bell |
| each |
| 15 |
| 7.27 |
| Supply and install 20mm PVC electrical conduits |
| m |
| 1000 |
| 7.28 |
| Supply and install 25mm PVC electrical conduits |
| m |
| 1000 |
| 7.29 |
| Supply and install metal boxes 3"x3" |
| each |
| 300 |
| 7.30 |
| Supply and install metal boxes 6"x3" |
| each |
| 300 |
| 7.31 |
| Supply and install junction boxes complete with covers |
| each |
| 300 |
| 7.32 |
| Replace geyser switches |
| each |
| 30 |
| 7.33 |
| Supply and install light bulbs |
| each |
| 300 |
| 7.34 |
| supply and install lightening arrestors |
| each |
| 60 |
| 7.35 |
| Label distribution panel |
| lot |
| 10 |
| 7.36 |
| Install dead front panel |
| lot |
| 10 |
| 8 |
| PAINTING SERVICES (See Section C.2.1.4) |
| 8.1 |
| Clean old paint, repair plaster, prime and smooth surface, apply (1) coat of interior undercoat paint to walls and ceiling |
| m² |
| 2500 |
| 8.2 |
| Colored painting walls, two coats, (semi-gloss) paint, no surface preparation |
| m² |
| 4000 |
| 8.3 |
| Painting ceilings, two coats, (PVA) paint, no surface preparation |
| m² |
| 3000 |
| 8.4 |
| Paint, exterior oil 2 coat |
| m² |
| 800 |
| 8.5 |
| Paint, exterior latex, 2coat |
| m² |
| 2000 |
| 8.6 |
| Paint, exterior enamel,2coats |
| m² |
| 1000 |
| 8.7 |
| Paint, interior latex, 2 coat |
| m² |
| 2000 |
| 8.8 |
| Painting trim/baseboards, one coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 8.9 |
| Varnishing of woodwork, following surface preparation |
| m² |
| 1000 |
| 8.10 |
| Textured Surfaces preparatory work |
| m² |
| 1000 |
| 8.11 |
| Painting of textured surfaces, one coat, (latex semi-gloss, spray application incl. Floor coverings, etc.) |
| m² |
| 1000 |
| 8.12 |
| Prepare surface and apply ceiling texture (spray application incl. Floor coverings, etc.) |
| m² |
| 600 |
| 8.13 |
| Painting wood surfaces, two coat, (lead-free) paint, gloss finish, following surface preparation |
| m² |
| 600 |
| 8.14 |
| Painting metal surfaces, two coat, (lead-free) paint, gloss finish, following surface preparation |
| m² |
| 200 |
| 8.15 |
| Painting wood surfaces( narrow surfaces not exceeding 300mm wide),two coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 8.16 |
| Painting metal surfaces ( narrow surfaces not exceeding 300mm wide),two coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 9 |
| HVAC SERVICES (see Section C.2.7) |
| 9.1 |
| Install indoor Evaporator units. |
| each |
| 40 |
| 9.2 |
| Install outside condensing units |
| each |
| 40 |
| 9.3 |
| Install refrigeration lines/pipes between the inside and outside units. The refrigeration lines/pipes between the inside and outside units must be installed following a route and in a manner acceptable to the Contracting Officer Representative. Insulate all pipes with Armaflex |
| each |
| 40 |
| 9.4 |
| Install all pipes in Trunkings and provide for Air-conditioning drain. |
| each |
| 40 |
| 9.5 |
| Install thermostat holder. The location where the thermostat will be installed will be coordinated with the contracting Officer Representative. |
| each |
| 40 |
| 9.6 |
| Provide for an Isolation switch for the indoor and outdoor unit |
| each |
| 40 |
| 9.7 |
| Install electrical power and signal cable between indoor and outdoor unit. |
| each |
| 40 |
| 9.8 |
| The new AC units must be tested for proper operation. The contractor must demonstrate to the Contracting Officer Representatives that the system functions properly before the project will be accepted. |
| each |
| 40 |
| 9.9 |
| Carry out full service of the existing ACs as described in C.2.4 (c ) |
| each |
| 40 |
Total of all line-item prices:
Base year total
*m² – square meter The estimated amounts are based on total estimated Government requirements. This means that if more than one award is made, the estimated amount of work awarded under task order(s) to any single contractor will be less than the amount shown.
B.3.4
FIRST OPTION YEAR PRICES
| Item |
| Description |
| Unit |
| Quantity |
| Rate |
| Amount |
| 1.1 |
| Demolish existing concrete slab, remove debris from site and cart away to contractor's dump site(average thickness 150mm) |
| m³ |
| 7 |
| 1.2 |
| Demolish existing masonry wall including plaster, remove debris from site and cart away to contractor's dump site |
| m² |
| 70 |
| 1.3 |
| Carefully remove roof covering and all damaged purlin and roof structure, remove debris from site and cart away to contractor's dump site |
| m² |
| 60 |
| 1.4 |
| Remove existing gutters ,remove debris from and cart away to contractors dump site |
| m |
| 150 |
| 1.5 |
| Remove existing fascial board, remove debris from site and cart away to contractor’s dump site |
| m |
| 150 |
| 1.6 |
| Remove all existing wall tiles, remove debris from site and cart away to contractor's dump site |
| m |
| 60 |
| 1.7 |
| Remove all existing floor covering, remove debris from site and cart away to contractor's dump site |
| m² |
| 200 |
| 1.8 |
| Remove existing door frames including lintol , remove debris and hand over frame to client or cart away to contractor’s dump site |
| each |
| 15 |
| 1.9 |
| Remove existing window frames including lintol , remove debris and hand over frame to client or cart away to contractor's dump site |
| lot |
| 7 |
| 1.10 |
| Remove existing bathtub ,wash hand basin and toilet pan, clean drain and hand over to the COR |
| lot |
| 8 |
| 1.11 |
| Remove all plumbing piping , remove debris and cart away to contractor’s dump site |
| lot |
| 8 |
| 1.12 |
| Removing existing particle board/gypsum board ceiling including blundering, remove debris and cart away. |
| m² |
| 150 |
| 1.13 |
| Remove existing wall cabinets and hand over to the COR |
| lot |
| 7 |
| 1.14 |
| Remove existing curtain rails and supports. Hand over to the COR |
| m |
| 100 |
| 1.15 |
| Carefully remove all distribution panel boards including all cabling and take away from site |
| lot |
| 7 |
| 1.16 |
| Carefully remove all electrical light fittings including switches and cabling and take away from site |
| lot |
| 7 |
| 1.17 |
| Carefully remove all sockets including all cabling and take away from site |
| lot |
| 7 |
| 2.1 |
| Supply and cast plain concrete grade 20/20 mm aggregate. |
| m³ |
| 10 |
| 2.2 |
| Supply and cast vibrated reinforced concrete grade 25/20 mm aggregate. |
| m³ |
| 8 |
| 2.3 |
| Supply and lay deformed steel bars reinforcement (varies sizes) |
| kg |
| 100 |
| 2.4 |
| Supply and lay steel mesh fabric reinforcement conforce 257 allowing 200mm lap at joints |
| m² |
| 20 |
| 2.5 |
| Supply and lay steel mesh fabric reinforcement conforce 86 allowing 200mm lap at joints |
| m² |
| 25 |
| 2.6 |
| Formworks for sides of columns, steps edges of the beds |
| m² |
| 120 |
| 2.7 |
| Repair crack concrete screed chip off 25mm wide V joint seal with cement grout |
| m |
| 60 |
| 3.1 |
| Clear site of works of shrubs, bushes and trees |
| m² |
| 50 |
| 3.2 |
| Excavate around foundation not exceeding 1m deep |
| m³ |
| 10 |
| 3.3 |
| Excavate to remove top soil and load and cart away to contractors tipping site average depth 150mm |
| m² |
| 70 |
| 3.4 |
| load and cart away surplus spoil to contractor’s dump site |
| m³ |
| 60 |
| 3.5 |
| Backfill and compact in layers not exceeding 150mm |
| m³ |
| 90 |
| 3.6 |
| Supply and install 500 gauge polythene laid under surface beds |
| m² |
| 90 |
| 3.7 |
| Apply approved ant termite treatment |
| m² |
| 90 |
| 4 |
| MASONRY SERVICES (See section C.2.11) |
| 4.1 |
| Erect hollow block walling (3.5N/m2 crushing strength) in cement mortar allow for brick force reinforcement every 3 courses |
| 4.2 |
| Erect Solid block/brick walling (5.0N/m2 crushing strength) in cement mortar and allowing for brick force reinforcement every 3 courses |
| 4.3.1 |
| Cement/sand (1:4) external rendering 20mm thick in wood float finish |
| m² |
| 100 |
| 4.3.2 |
| Cement/sand (1:3) internal rendering 20mm thick in steel trowelled smooth finish |
| m² |
| 100 |
| 4.3.3 |
| Plaster to reveal and returns |
| m |
| 100 |
| 4.4 |
| Beam filling between wall and roof |
| m |
| 100 |
| 4.5 |
| Supply and install 14g standard pressed steel door frame, double rebated including hinges, masonry, jamps and striking plate. |
| each |
| 15 |
| 4.6 |
| Supply and install standard metal window frame size 1200x900mm complete with handle and stays |
| each |
| 15 |
| 4.7 |
| Supply and install standard metal window frame size 2400x900mm complete with handle and stays |
| each |
| 8 |
| 4.8 |
| Supply and install standard metal window frame size 900x600mm complete with handle and stays |
| each |
| 8 |
| 4.9 |
| Supply and install standard metal window frame size 1800x900mm complete with handle and stays |
| each |
| 8 |
| 4.10 |
| Supply and apply gypsum plaster in one coat skimming finish with a steel trowel |
| m² |
| 100 |
| 4.11 |
| Supply and install ceramic floor tiles (Grade AAA). Including grouting and sealing. |
| m² |
| 100 |
| 4.12 |
| Supply and install porcelain floor tiles. (Grade AAA) including grouting and grout sealing |
| m² |
| 100 |
| 4.13 |
| Supply and install ceramic wall tiles(Grade AAA) including grouting and sealing |
| m² |
| 300 |
| 4.14 |
| Cast and install 40mm floor screed in cement/ sand mix (1:3) |
| m² |
| 150 |
| 5 |
| CARPENTRY SERVICES (see Section C.2.8) |
| 5.1 |
| Supply and install 0.5mm IBR factory painted roof sheeting including nailing and insulation |
| m² |
| 100 |
| 5.2 |
| Supply and install clay/cement tiles including nailing |
| m² |
| 80 |
| 5.3 |
| Supply and install iron roof ridge |
| m |
| 100 |
| 5.4 |
| Supply and install roof ridge for clay/cement tiles |
| m |
| 25 |
| 5.5 |
| Supply and install metal gutter |
| m |
| 100 |
| 5.6 |
| Supply and install PVC ceiling including edge strips |
| m² |
| 150 |
| 5.7 |
| Supply and install 8mm particle board ceiling |
| m² |
| 100 |
| 5.8 |
| Supply and install sawn 50 x 50mm softwood blandering including supports |
| m |
| 300 |
| 5.9 |
| Supply and install wrought softwood 225x25 mm fascias board |
| m |
| 200 |
| 5.10 |
| Supply and install 100mm half round PVC gutter |
| m |
| 150 |
| 5.11 |
| Supply and install 150mm half round PVC gutter |
| m |
| 150 |
| 5.12 |
| Supply and install 100mm down pipes including connection to gutter ,end outlets and wall supports |
| m |
| 60 |
| 5.13 |
| Supply and install standard aluminum window complete with locking, flyscreen’s and 6mm glazing. |
| m² |
| 60 |
| 5.14 |
| Supply and install 45mm solid core flush doors |
| each |
| 30 |
| 5.15 |
| Supply and install 45mm hollow core flush doors |
| each |
| 15 |
| 5.16 |
| Supply and install 45mm mukwa/rosewood doors |
| each |
| 30 |
| 5.17 |
| Supply and install 3 lever mortice lock |
| each |
| 150 |
| 5.18 |
| Install government supplied dead bolt locks |
| each |
| 15 |
| 5.19 |
| Supply and install 150 X50mm rafters including painting with preservative |
| m |
| 200 |
| 5.20 |
| Supply and install 100 X 38mm rafters including painting with preservative and nailing |
| m |
| 200 |
| 5.21 |
| Supply and install 75 X50mm purlins including painting with preservative and nailing |
| m |
| 300 |
| 5.22 |
| Supply and Install shelving in cabinets using 18mm block boards |
| m² |
| 80 |
| 5.23 |
| Supply and Install double rod wooden curtain rails including supports size 2500m |
| each |
| 50 |
| 5.24 |
| Supply and Install double rod metal curtain rails including supports, |
| each |
| 50 |
| 5.25 |
| Supply and install suspended ceiling as 10mm rhinoboard or other equal approved plasterboard with skimmed plaster fixed already existing 50x50mm branders including joint tape and cornice |
| m² |
| 150 |
| 5.26 |
| Replace wooden framed screen door 2000 x900mm |
| each |
| 20 |
| 5.27 |
| Replace aluminum framed screen door 2000 x900mm |
| each |
| 20 |
| 5.28 |
| Replace fly screen including frame to windows 900x600mm |
| each |
| 60 |
| 5.29 |
| Supply and install door stopper |
| each |
| 200 |
| 5.30 |
| Supply and install parquet wood floor |
| m² |
| 200 |
| 5.31 |
| Supply and install 400x75x20mm teak wood floor |
| m² |
| 150 |
| 5.32 |
| Supply and install 400x75x20mm rosewood wood floor |
| m² |
| 100 |
| 5.33 |
| Supply and install 100mm x 20mm wood base board |
| m |
| 400 |
| 5.34 |
| Supply and install 75mm softwood cornice |
| m |
| 400 |
| 5.35 |
| Supply and install 40mm softwood cover strips |
| m |
| 250 |
| 5.36 |
| Supply install 100mm butt hinges complete with screws |
| each |
| 80 |
| 5.37 |
| Supply and install aluminum weather strips 900mm |
| each |
| 30 |
| 5.38 |
| Supply and install 6mm clear glass including putty |
| m² |
| 40 |
| 5.39 |
| Supply and install 3mm clear glass including putty |
| m² |
| 40 |
| 5.40 |
| Supply and install 6mm obscure glass including putty |
| m² |
| 15 |
| 5.41 |
| Supply and install 3mm obscure glass including putty |
| m² |
| 15 |
| 5.42 |
| Check and repair sticky hinges doors, drawers and sliding doors. Per house |
| lot |
| 14 |
| 5.43 |
| Clean chimneys and fireplaces per house |
| each |
| 10 |
| 5.44 |
| Replace 30mm granite counter tops 600mm |
| m |
| 25 |
| 5.45 |
| Replace cabinet hinges per house |
| each |
| 14 |
| 5.46 |
| Repair leaky roof using roof membrane /house |
| lot |
| 10 |
| 5.47 |
| Replace caulking around the bathtub and kitchen sink |
| m |
| 30 |
| 5.48 |
| Supply and install coat hooks |
| each |
| 20 |
| 5.49 |
| Supply and install soap holder |
| each |
| 20 |
| 5.50 |
| Supply and install toilet roll holder |
| each |
| 20 |
| 5.51 |
| Supply and install 25mm shower curtain rod complete with end brackets. |
| m |
| 25 |
| 5.52 |
| Supply and install insulation in the ceiling. |
| m² |
| 150 |
| 5.53 |
| Supply and install 1.6mm vinyl composition tile floor 300 x300mm including supply of adhesive. |
| m² |
| 80 |
| 5.54 |
| Supply and replace aluminum screen materials for doors or windows |
| m² |
| 80 |
| 5.55 |
| Supply and replace wooden door frame complete with trims |
| each |
| 20 |
| 5.56 |
| Supply and install quarter round wood mouldings |
| m |
| 100 |
| 6 |
| PLUMBING SERVICES (see Section C.2.5) |
| 6.1 |
| Check and test all plumbing fixtures and snake out all interior drain lines |
| lot |
| 8 |
| 6.2 |
| Replace 20mm CPVC water pipe complete with fittings fixed approved solvent |
| m |
| 500 |
| 6.3 |
| Replace 12mm CPVC water pipe complete with fittings fixed approved solvent |
| m |
| 500 |
| 6.4 |
| Replace kitchen double bowl sink |
| each |
| 8 |
| 6.5 |
| Replace swing kitchen faucet Cobra or similar quality |
| each |
| 10 |
| 6.6 |
| Replace P trap for kitchen sink |
| each |
| 20 |
| 6.7 |
| Replace wash hand basin of high quality |
| each |
| 15 |
| 6.8 |
| Supply and replace 12mm copper/flexi connector |
| each |
| 30 |
| 6.9 |
| Supply and replace 20mm copper/flexi connector |
| each |
| 30 |
| 6.10 |
| Supply and install 20mm CPVC gate valves |
| each |
| 150 |
| 6.11 |
| Supply and install 12mm CPVC gate valves |
| each |
| 150 |
| 6.12 |
| Supply and install connection from GI to CPVC 20mm |
| each |
| 40 |
| 6.13 |
| Supply and install connection from GI to CPVC 12mm |
| each |
| 40 |
| 6.14 |
| Supply and install 40mm PVC waste pipes complete with fitting. |
| m |
| 200 |
| 6.15 |
| Supply and install 50mm PVC waste pipes complete with fitting. |
| m |
| 200 |
| 6.16 |
| Supply and install 110mm PVC pipes complete with fittings |
| m |
| 400 |
| 6.17 |
| Supply and install telephone bath mixer 20mm |
| each |
| 20 |
| 6.18 |
| Supply and install 500x500 manhole cover |
| each |
| 15 |
| 6.19 |
| Supply and install shower valve and mixing assembly 20mm |
| each |
| 10 |
| 6.20 |
| Supply and install shower head |
| each |
| 20 |
| 6.21 |
| Supply and install toilet pan complete with cistern |
| each |
| 25 |
| 6.22 |
| Supply and install seat cover |
| each |
| 25 |
| 6.23 |
| Supply and install WHB mixer 12mm |
| each |
| 25 |
| 6.24 |
| Supply and install shower cubicle 1200x900 as supplied by Make a Home with tempered glass panels or similar |
| each |
| 10 |
| 6.25 |
| Supply and install bathtub 1700x600x450mm deep |
| each |
| 10 |
| 6.26 |
| Supply and install 6mm mirror complete with dome screws and caps |
| each |
| 20 |
| 6.27 |
| Chisel for piping in wall 50mm deep for pipes up 50mm |
| lot |
| 10 |
| 6.28 |
| Chisel for piping in slab 70mm deep for pipes up 50mm |
| lot |
| 10 |
| 6.29 |
| Chisel for piping through 100mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.30 |
| Chisel for piping through 150mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.31 |
| Chisel for piping through 200mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.32 |
| Supply and install 100 ltrs water heater |
| each |
| 20 |
| 6.33 |
| Service water heater by removing accumulation of scale, clean element with vinegar and re-install |
| lot |
| 10 |
| 6.34 |
| Supply and install 2KW heating element complete with thermostat. |
| each |
| 20 |
| 6.35 |
| Install valve labels |
| lot |
| 10 |
| 6.36 |
| Supply and install shut off valves 20mm |
| lot |
| 10 |
| 6.37 |
| Remove scale from mixers |
| lot |
| 10 |
| 7 |
| ELECTRICAL SERVICES (see Section C.2.6) |
| 7.1 |
| Replace existing light switches |
| each |
| 150 |
| 7.2 |
| Replace existing electrical outlets |
| each |
| 250 |
| 7.3 |
| Replace MCBs single pole 20Amps |
| each |
| 100 |
| 7.4 |
| Replace MCBs single pole 10Amps |
| each |
| 100 |
| 7.5 |
| Replace MCBs single pole 30Amps |
| each |
| 100 |
| 7.6 |
| Replace MCBs single pole 40Amps |
| each |
| 100 |
| 7.7 |
| Replace MCBs single pole 60Amps |
| each |
| 60 |
| 7.8 |
| Replace MCBs single pole 80Amps |
| each |
| 60 |
| 7.9 |
| Replace MCBs tripple pole 20Amps |
| each |
| 20 |
| 7.10 |
| Replace MCBs tripple pole 60Amps |
| each |
| 20 |
| 7.11 |
| Replace MCBs tripple pole 80Amps |
| each |
| 20 |
| 7.12 |
| Supply and install 1.5mm 2 cable red |
| m |
| 4000 |
| 7.13 |
| Supply and install 2.5mm 2 cable red |
| m |
| 4000 |
| 7.14 |
| Supply and install 4mm 2 cable red |
| m |
| 2500 |
| 7.15 |
| Supply and install 6mm 2 cable red |
| m |
| 1000 |
| 7.16 |
| supply and install 4 ft single fluorescent light fitting |
| each |
| 200 |
| 7.17 |
| supply and install 2 ft single fluorescent light fitting |
| each |
| 20 |
| 7.18 |
| supply and install 4 ft double fluorescent light fitting |
| each |
| 200 |
| 7.19 |
| supply and install 2 ft double fluorescent light fitting |
| each |
| 20 |
| 7.20 |
| supply and install recessed vapor barrier light fixture |
| each |
| 80 |
| 7.21 |
| Supply and install 6" spherical light fitting |
| each |
| 80 |
| 7.22 |
| Supply and install 8" spherical light fitting |
| each |
| 80 |
| 7.23 |
| Install government supplied chandelier |
| each |
| 20 |
| 7.24 |
| Install government supplied ceiling fan |
| each |
| 30 |
| 7.25 |
| Install government supplied GFCI socket outlets |
| each |
| 30 |
| 7.26 |
| Install government supplied door bell |
| each |
| 15 |
| 7.27 |
| Supply and install 20mm PVC electrical conduits |
| m |
| 1000 |
| 7.28 |
| Supply and install 25mm PVC electrical conduits |
| m |
| 1000 |
| 7.29 |
| Supply and install metal boxes 3"x3" |
| each |
| 300 |
| 7.30 |
| Supply and install metal boxes 6"x3" |
| each |
| 300 |
| 7.31 |
| Supply and install junction boxes complete with covers |
| each |
| 300 |
| 7.32 |
| Replace geyser switches |
| each |
| 30 |
| 7.33 |
| Supply and install light bulbs |
| each |
| 300 |
| 7.34 |
| supply and install lightening arrestors |
| each |
| 60 |
| 7.35 |
| Label distribution panel |
| lot |
| 10 |
| 7.36 |
| Install dead front panel |
| lot |
| 10 |
| 8 |
| PAINTING SERVICES (See Section C.2.1.4) |
| 8.1 |
| Clean old paint, repair plaster, prime and smooth surface, apply (1) coat of interior undercoat paint to walls and ceiling |
| m² |
| 2500 |
| 8.2 |
| Colored painting walls, two coats, (semi-gloss) paint, no surface preparation |
| m² |
| 4000 |
| 8.3 |
| Painting ceilings, two coats, (PVA) paint, no surface preparation |
| m² |
| 3000 |
| 8.4 |
| Paint, exterior oil 2 coat |
| m² |
| 800 |
| 8.5 |
| Paint, exterior latex, 2coat |
| m² |
| 2000 |
| 8.6 |
| Paint, exterior enamel,2coats |
| m² |
| 1000 |
| 8.7 |
| Paint, interior latex, 2 coat |
| m² |
| 2000 |
| 8.8 |
| Painting trim/baseboards, one coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 8.9 |
| Varnishing of woodwork, following surface preparation |
| m² |
| 1000 |
| 8.10 |
| Textured Surfaces preparatory work |
| m² |
| 1000 |
| 8.11 |
| Painting of textured surfaces, one coat, (latex semi-gloss, spray application incl. Floor coverings, etc.) |
| m² |
| 1000 |
| 8.12 |
| Prepare surface and apply ceiling texture (spray application incl. Floor coverings, etc.) |
| m² |
| 600 |
| 8.13 |
| Painting wood surfaces, two coat, (lead-free) paint, gloss finish, following surface preparation |
| m² |
| 600 |
| 8.14 |
| Painting metal surfaces, two coat, (lead-free) paint, gloss finish, following surface preparation |
| m² |
| 200 |
| 8.15 |
| Painting wood surfaces( narrow surfaces not exceeding 300mm wide),two coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 8.16 |
| Painting metal surfaces ( narrow surfaces not exceeding 300mm wide),two coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 9 |
| HVAC SERVICES (see Section C.2.7) |
| 9.1 |
| Install indoor Evaporator units. |
| each |
| 40 |
| 9.2 |
| Install outside condensing units |
| each |
| 40 |
| 9.3 |
| Install refrigeration lines/pipes between the inside and outside units. The refrigeration lines/pipes between the inside and outside units must be installed following a route and in a manner acceptable to the Contracting Officer Representative. Insulate all pipes with Armaflex |
| each |
| 40 |
| 9.4 |
| Install all pipes in Trunkings and provide for Air-conditioning drain. |
| each |
| 40 |
| 9.5 |
| Install thermostat holder. The location where the thermostat will be installed will be coordinated with the contracting Officer Representative. |
| each |
| 40 |
| 9.6 |
| Provide for an Isolation switch for the indoor and outdoor unit |
| each |
| 40 |
| 9.7 |
| Install electrical power and signal cable between indoor and outdoor unit. |
| each |
| 40 |
| 9.8 |
| The new AC units must be tested for proper operation. The contractor must demonstrate to the Contracting Officer Representatives that the system functions properly before the project will be accepted. |
| each |
| 40 |
| 9.9 |
| Carry out full service of the existing ACs as described in C.2.4 (c ) |
| each |
| 40 |
Total of all line-item prices:
First Option year total
The estimated amounts are based on total estimated Government requirements. This means that if more than one award is made, the estimated amount of work awarded under task order(s) to any single contractor will be less than the amount shown.
B.3.5
SECOND OPTION YEAR PRICES
| Item |
| Description |
| Unit |
| Quantity |
| Rate |
| Amount |
| 1.1 |
| Demolish existing concrete slab, remove debris from site and cart away to contractor's dump site(average thickness 150mm) |
| m³ |
| 7 |
| 1.2 |
| Demolish existing masonry wall including plaster, remove debris from site and cart away to contractor's dump site |
| m² |
| 70 |
| 1.3 |
| Carefully remove roof covering and all damaged purlin and roof structure, remove debris from site and cart away to contractor's dump site |
| m² |
| 60 |
| 1.4 |
| Remove existing gutters ,remove debris from and cart away to contractors dump site |
| m |
| 150 |
| 1.5 |
| Remove existing fascial board, remove debris from site and cart away to contractor’s dump site |
| m |
| 150 |
| 1.6 |
| Remove all existing wall tiles, remove debris from site and cart away to contractor's dump site |
| m |
| 60 |
| 1.7 |
| Remove all existing floor covering, remove debris from site and cart away to contractor's dump site |
| m² |
| 200 |
| 1.8 |
| Remove existing door frames including lintol , remove debris and hand over frame to client or cart away to contractor’s dump site |
| each |
| 15 |
| 1.9 |
| Remove existing window frames including lintol , remove debris and hand over frame to client or cart away to contractor's dump site |
| lot |
| 7 |
| 1.10 |
| Remove existing bathtub ,wash hand basin and toilet pan, clean drain and hand over to the COR |
| lot |
| 8 |
| 1.11 |
| Remove all plumbing piping , remove debris and cart away to contractor’s dump site |
| lot |
| 8 |
| 1.12 |
| Removing existing particle board/gypsum board ceiling including blundering, remove debris and cart away. |
| m² |
| 150 |
| 1.13 |
| Remove existing wall cabinets and hand over to the COR |
| lot |
| 7 |
| 1.14 |
| Remove existing curtain rails and supports. Hand over to the COR |
| m |
| 100 |
| 1.15 |
| Carefully remove all distribution panel boards including all cabling and take away from site |
| lot |
| 7 |
| 1.16 |
| Carefully remove all electrical light fittings including switches and cabling and take away from site |
| lot |
| 7 |
| 1.17 |
| Carefully remove all sockets including all cabling and take away from site |
| lot |
| 7 |
| 2.1 |
| Supply and cast plain concrete grade 20/20 mm aggregate. |
| m³ |
| 10 |
| 2.2 |
| Supply and cast vibrated reinforced concrete grade 25/20 mm aggregate. |
| m³ |
| 8 |
| 2.3 |
| Supply and lay deformed steel bars reinforcement (varies sizes) |
| kg |
| 100 |
| 2.4 |
| Supply and lay steel mesh fabric reinforcement conforce 257 allowing 200mm lap at joints |
| m² |
| 20 |
| 2.5 |
| Supply and lay steel mesh fabric reinforcement conforce 86 allowing 200mm lap at joints |
| m² |
| 25 |
| 2.6 |
| Formworks for sides of columns, steps edges of the beds |
| m² |
| 120 |
| 2.7 |
| Repair crack concrete screed chip off 25mm wide V joint seal with cement grout |
| m |
| 60 |
| 3.1 |
| Clear site of works of shrubs, bushes and trees |
| m² |
| 50 |
| 3.2 |
| Excavate around foundation not exceeding 1m deep |
| m³ |
| 10 |
| 3.3 |
| Excavate to remove top soil and load and cart away to contractors tipping site average depth 150mm |
| m² |
| 70 |
| 3.4 |
| load and cart away surplus spoil to contractor’s dump site |
| m³ |
| 60 |
| 3.5 |
| Backfill and compact in layers not exceeding 150mm |
| m³ |
| 90 |
| 3.6 |
| Supply and install 500 gauge polythene laid under surface beds |
| m² |
| 90 |
| 3.7 |
| Apply approved ant termite treatment |
| m² |
| 90 |
| 4 |
| MASONRY SERVICES (See section C.2.11) |
| 4.1 |
| Erect hollow block walling (3.5N/m2 crushing strength) in cement mortar allow for brick force reinforcement every 3 courses |
| 4.2 |
| Erect Solid block/brick walling (5.0N/m2 crushing strength) in cement mortar and allowing for brick force reinforcement every 3 courses |
| 4.3.1 |
| Cement/sand (1:4) external rendering 20mm thick in wood float finish |
| m² |
| 100 |
| 4.3.2 |
| Cement/sand (1:3) internal rendering 20mm thick in steel trowelled smooth finish |
| m² |
| 100 |
| 4.3.3 |
| Plaster to reveal and returns |
| m |
| 100 |
| 4.4 |
| Beam filling between wall and roof |
| m |
| 100 |
| 4.5 |
| Supply and install 14g standard pressed steel door frame, double rebated including hinges, masonry, jamps and striking plate. |
| each |
| 15 |
| 4.6 |
| Supply and install standard metal window frame size 1200x900mm complete with handle and stays |
| each |
| 15 |
| 4.7 |
| Supply and install standard metal window frame size 2400x900mm complete with handle and stays |
| each |
| 8 |
| 4.8 |
| Supply and install standard metal window frame size 900x600mm complete with handle and stays |
| each |
| 8 |
| 4.9 |
| Supply and install standard metal window frame size 1800x900mm complete with handle and stays |
| each |
| 8 |
| 4.10 |
| Supply and apply gypsum plaster in one coat skimming finish with a steel trowel |
| m² |
| 100 |
| 4.11 |
| Supply and install ceramic floor tiles (Grade AAA). Including grouting and sealing. |
| m² |
| 100 |
| 4.12 |
| Supply and install porcelain floor tiles. (Grade AAA) including grouting and grout sealing |
| m² |
| 100 |
| 4.13 |
| Supply and install ceramic wall tiles(Grade AAA) including grouting and sealing |
| m² |
| 300 |
| 4.14 |
| Cast and install 40mm floor screed in cement/ sand mix (1:3) |
| m² |
| 150 |
| 5 |
| CARPENTRY SERVICES (see Section C.2.8) |
| 5.1 |
| Supply and install 0.5mm IBR factory painted roof sheeting including nailing and insulation |
| m² |
| 100 |
| 5.2 |
| Supply and install clay/cement tiles including nailing |
| m² |
| 80 |
| 5.3 |
| Supply and install iron roof ridge |
| m |
| 100 |
| 5.4 |
| Supply and install roof ridge for clay/cement tiles |
| m |
| 25 |
| 5.5 |
| Supply and install metal gutter |
| m |
| 100 |
| 5.6 |
| Supply and install PVC ceiling including edge strips |
| m² |
| 150 |
| 5.7 |
| Supply and install 8mm particle board ceiling |
| m² |
| 100 |
| 5.8 |
| Supply and install sawn 50 x 50mm softwood blandering including supports |
| m |
| 300 |
| 5.9 |
| Supply and install wrought softwood 225x25 mm fascias board |
| m |
| 200 |
| 5.10 |
| Supply and install 100mm half round PVC gutter |
| m |
| 150 |
| 5.11 |
| Supply and install 150mm half round PVC gutter |
| m |
| 150 |
| 5.12 |
| Supply and install 100mm down pipes including connection to gutter ,end outlets and wall supports |
| m |
| 60 |
| 5.13 |
| Supply and install standard aluminum window complete with locking, flyscreen’s and 6mm glazing. |
| m² |
| 60 |
| 5.14 |
| Supply and install 45mm solid core flush doors |
| each |
| 30 |
| 5.15 |
| Supply and install 45mm hollow core flush doors |
| each |
| 15 |
| 5.16 |
| Supply and install 45mm mukwa/rosewood doors |
| each |
| 30 |
| 5.17 |
| Supply and install 3 lever mortice lock |
| each |
| 150 |
| 5.18 |
| Install government supplied dead bolt locks |
| each |
| 15 |
| 5.19 |
| Supply and install 150 X50mm rafters including painting with preservative |
| m |
| 200 |
| 5.20 |
| Supply and install 100 X 38mm rafters including painting with preservative and nailing |
| m |
| 200 |
| 5.21 |
| Supply and install 75 X50mm purlins including painting with preservative and nailing |
| m |
| 300 |
| 5.22 |
| Supply and Install shelving in cabinets using 18mm block boards |
| m² |
| 80 |
| 5.23 |
| Supply and Install double rod wooden curtain rails including supports size 2500m |
| each |
| 50 |
| 5.24 |
| Supply and Install double rod metal curtain rails including supports, |
| each |
| 50 |
| 5.25 |
| Supply and install suspended ceiling as 10mm rhinoboard or other equal approved plasterboard with skimmed plaster fixed already existing 50x50mm branders including joint tape and cornice |
| m² |
| 150 |
| 5.26 |
| Replace wooden framed screen door 2000 x900mm |
| each |
| 20 |
| 5.27 |
| Replace aluminum framed screen door 2000 x900mm |
| each |
| 20 |
| 5.28 |
| Replace fly screen including frame to windows 900x600mm |
| each |
| 60 |
| 5.29 |
| Supply and install door stopper |
| each |
| 200 |
| 5.30 |
| Supply and install parquet wood floor |
| m² |
| 200 |
| 5.31 |
| Supply and install 400x75x20mm teak wood floor |
| m² |
| 150 |
| 5.32 |
| Supply and install 400x75x20mm rosewood wood floor |
| m² |
| 100 |
| 5.33 |
| Supply and install 100mm x 20mm wood base board |
| m |
| 400 |
| 5.34 |
| Supply and install 75mm softwood cornice |
| m |
| 400 |
| 5.35 |
| Supply and install 40mm softwood cover strips |
| m |
| 250 |
| 5.36 |
| Supply install 100mm butt hinges complete with screws |
| each |
| 80 |
| 5.37 |
| Supply and install aluminum weather strips 900mm |
| each |
| 30 |
| 5.38 |
| Supply and install 6mm clear glass including putty |
| m² |
| 40 |
| 5.39 |
| Supply and install 3mm clear glass including putty |
| m² |
| 40 |
| 5.40 |
| Supply and install 6mm obscure glass including putty |
| m² |
| 15 |
| 5.41 |
| Supply and install 3mm obscure glass including putty |
| m² |
| 15 |
| 5.42 |
| Check and repair sticky hinges doors, drawers and sliding doors. Per house |
| lot |
| 14 |
| 5.43 |
| Clean chimneys and fireplaces per house |
| each |
| 10 |
| 5.44 |
| Replace 30mm granite counter tops 600mm |
| m |
| 25 |
| 5.45 |
| Replace cabinet hinges per house |
| each |
| 14 |
| 5.46 |
| Repair leaky roof using roof membrane /house |
| lot |
| 10 |
| 5.47 |
| Replace caulking around the bathtub and kitchen sink |
| m |
| 30 |
| 5.48 |
| Supply and install coat hooks |
| each |
| 20 |
| 5.49 |
| Supply and install soap holder |
| each |
| 20 |
| 5.50 |
| Supply and install toilet roll holder |
| each |
| 20 |
| 5.51 |
| Supply and install 25mm shower curtain rod complete with end brackets. |
| m |
| 25 |
| 5.52 |
| Supply and install insulation in the ceiling. |
| m² |
| 150 |
| 5.53 |
| Supply and install 1.6mm vinyl composition tile floor 300 x300mm including supply of adhesive. |
| m² |
| 80 |
| 5.54 |
| Supply and replace aluminum screen materials for doors or windows |
| m² |
| 80 |
| 5.55 |
| Supply and replace wooden door frame complete with trims |
| each |
| 20 |
| 5.56 |
| Supply and install quarter round wood mouldings |
| m |
| 100 |
| 6 |
| PLUMBING SERVICES (see Section C.2.5) |
| 6.1 |
| Check and test all plumbing fixtures and snake out all interior drain lines |
| lot |
| 8 |
| 6.2 |
| Replace 20mm CPVC water pipe complete with fittings fixed approved solvent |
| m |
| 500 |
| 6.3 |
| Replace 12mm CPVC water pipe complete with fittings fixed approved solvent |
| m |
| 500 |
| 6.4 |
| Replace kitchen double bowl sink |
| each |
| 8 |
| 6.5 |
| Replace swing kitchen faucet Cobra or similar quality |
| each |
| 10 |
| 6.6 |
| Replace P trap for kitchen sink |
| each |
| 20 |
| 6.7 |
| Replace wash hand basin of high quality |
| each |
| 15 |
| 6.8 |
| Supply and replace 12mm copper/flexi connector |
| each |
| 30 |
| 6.9 |
| Supply and replace 20mm copper/flexi connector |
| each |
| 30 |
| 6.10 |
| Supply and install 20mm CPVC gate valves |
| each |
| 150 |
| 6.11 |
| Supply and install 12mm CPVC gate valves |
| each |
| 150 |
| 6.12 |
| Supply and install connection from GI to CPVC 20mm |
| each |
| 40 |
| 6.13 |
| Supply and install connection from GI to CPVC 12mm |
| each |
| 40 |
| 6.14 |
| Supply and install 40mm PVC waste pipes complete with fitting. |
| m |
| 200 |
| 6.15 |
| Supply and install 50mm PVC waste pipes complete with fitting. |
| m |
| 200 |
| 6.16 |
| Supply and install 110mm PVC pipes complete with fittings |
| m |
| 400 |
| 6.17 |
| Supply and install telephone bath mixer 20mm |
| each |
| 20 |
| 6.18 |
| Supply and install 500x500 manhole cover |
| each |
| 15 |
| 6.19 |
| Supply and install shower valve and mixing assembly 20mm |
| each |
| 10 |
| 6.20 |
| Supply and install shower head |
| each |
| 20 |
| 6.21 |
| Supply and install toilet pan complete with cistern |
| each |
| 25 |
| 6.22 |
| Supply and install seat cover |
| each |
| 25 |
| 6.23 |
| Supply and install WHB mixer 12mm |
| each |
| 25 |
| 6.24 |
| Supply and install shower cubicle 1200x900 as supplied by Make a Home with tempered glass panels or similar |
| each |
| 10 |
| 6.25 |
| Supply and install bathtub 1700x600x450mm deep |
| each |
| 10 |
| 6.26 |
| Supply and install 6mm mirror complete with dome screws and caps |
| each |
| 20 |
| 6.27 |
| Chisel for piping in wall 50mm deep for pipes up 50mm |
| lot |
| 10 |
| 6.28 |
| Chisel for piping in slab 70mm deep for pipes up 50mm |
| lot |
| 10 |
| 6.29 |
| Chisel for piping through 100mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.30 |
| Chisel for piping through 150mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.31 |
| Chisel for piping through 200mm wall for pipes up 110mm |
| lot |
| 10 |
| 6.32 |
| Supply and install 100 ltrs water heater |
| each |
| 20 |
| 6.33 |
| Service water heater by removing accumulation of scale, clean element with vinegar and re-install |
| lot |
| 10 |
| 6.34 |
| Supply and install 2KW heating element complete with thermostat. |
| each |
| 20 |
| 6.35 |
| Install valve labels |
| lot |
| 10 |
| 6.36 |
| Supply and install shut off valves 20mm |
| lot |
| 10 |
| 6.37 |
| Remove scale from mixers |
| lot |
| 10 |
| 7 |
| ELECTRICAL SERVICES (see Section C.2.6) |
| 7.1 |
| Replace existing light switches |
| each |
| 150 |
| 7.2 |
| Replace existing electrical outlets |
| each |
| 250 |
| 7.3 |
| Replace MCBs single pole 20Amps |
| each |
| 100 |
| 7.4 |
| Replace MCBs single pole 10Amps |
| each |
| 100 |
| 7.5 |
| Replace MCBs single pole 30Amps |
| each |
| 100 |
| 7.6 |
| Replace MCBs single pole 40Amps |
| each |
| 100 |
| 7.7 |
| Replace MCBs single pole 60Amps |
| each |
| 60 |
| 7.8 |
| Replace MCBs single pole 80Amps |
| each |
| 60 |
| 7.9 |
| Replace MCBs tripple pole 20Amps |
| each |
| 20 |
| 7.10 |
| Replace MCBs tripple pole 60Amps |
| each |
| 20 |
| 7.11 |
| Replace MCBs tripple pole 80Amps |
| each |
| 20 |
| 7.12 |
| Supply and install 1.5mm 2 cable red |
| m |
| 4000 |
| 7.13 |
| Supply and install 2.5mm 2 cable red |
| m |
| 4000 |
| 7.14 |
| Supply and install 4mm 2 cable red |
| m |
| 2500 |
| 7.15 |
| Supply and install 6mm 2 cable red |
| m |
| 1000 |
| 7.16 |
| supply and install 4 ft single fluorescent light fitting |
| each |
| 200 |
| 7.17 |
| supply and install 2 ft single fluorescent light fitting |
| each |
| 20 |
| 7.18 |
| supply and install 4 ft double fluorescent light fitting |
| each |
| 200 |
| 7.19 |
| supply and install 2 ft double fluorescent light fitting |
| each |
| 20 |
| 7.20 |
| supply and install recessed vapor barrier light fixture |
| each |
| 80 |
| 7.21 |
| Supply and install 6" spherical light fitting |
| each |
| 80 |
| 7.22 |
| Supply and install 8" spherical light fitting |
| each |
| 80 |
| 7.23 |
| Install government supplied chandelier |
| each |
| 20 |
| 7.24 |
| Install government supplied ceiling fan |
| each |
| 30 |
| 7.25 |
| Install government supplied GFCI socket outlets |
| each |
| 30 |
| 7.26 |
| Install government supplied door bell |
| each |
| 15 |
| 7.27 |
| Supply and install 20mm PVC electrical conduits |
| m |
| 1000 |
| 7.28 |
| Supply and install 25mm PVC electrical conduits |
| m |
| 1000 |
| 7.29 |
| Supply and install metal boxes 3"x3" |
| each |
| 300 |
| 7.30 |
| Supply and install metal boxes 6"x3" |
| each |
| 300 |
| 7.31 |
| Supply and install junction boxes complete with covers |
| each |
| 300 |
| 7.32 |
| Replace geyser switches |
| each |
| 30 |
| 7.33 |
| Supply and install light bulbs |
| each |
| 300 |
| 7.34 |
| supply and install lightening arrestors |
| each |
| 60 |
| 7.35 |
| Label distribution panel |
| lot |
| 10 |
| 7.36 |
| Install dead front panel |
| lot |
| 10 |
| 8 |
| PAINTING SERVICES (See Section C.2.1.4) |
| 8.1 |
| Clean old paint, repair plaster, prime and smooth surface, apply (1) coat of interior undercoat paint to walls and ceiling |
| m² |
| 2500 |
| 8.2 |
| Colored painting walls, two coats, (semi-gloss) paint, no surface preparation |
| m² |
| 4000 |
| 8.3 |
| Painting ceilings, two coats, (PVA) paint, no surface preparation |
| m² |
| 3000 |
| 8.4 |
| Paint, exterior oil 2 coat |
| m² |
| 800 |
| 8.5 |
| Paint, exterior latex, 2coat |
| m² |
| 2000 |
| 8.6 |
| Paint, exterior enamel,2coats |
| m² |
| 1000 |
| 8.7 |
| Paint, interior latex, 2 coat |
| m² |
| 2000 |
| 8.8 |
| Painting trim/baseboards, one coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 8.9 |
| Varnishing of woodwork, following surface preparation |
| m² |
| 1000 |
| 8.10 |
| Textured Surfaces preparatory work |
| m² |
| 1000 |
| 8.11 |
| Painting of textured surfaces, one coat, (latex semi-gloss, spray application incl. Floor coverings, etc.) |
| m² |
| 1000 |
| 8.12 |
| Prepare surface and apply ceiling texture (spray application incl. Floor coverings, etc.) |
| m² |
| 600 |
| 8.13 |
| Painting wood surfaces, two coat, (lead-free) paint, gloss finish, following surface preparation |
| m² |
| 600 |
| 8.14 |
| Painting metal surfaces, two coat, (lead-free) paint, gloss finish, following surface preparation |
| m² |
| 200 |
| 8.15 |
| Painting wood surfaces( narrow surfaces not exceeding 300mm wide),two coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 8.16 |
| Painting metal surfaces ( narrow surfaces not exceeding 300mm wide),two coat, (lead-free) paint, gloss finish, following surface preparation |
| m |
| 1000 |
| 9 |
| HVAC SERVICES (see Section C.2.7) |
| 9.1 |
| Install indoor Evaporator units. |
| each |
| 40 |
| 9.2 |
| Install outside condensing units |
| each |
| 40 |
| 9.3 |
| Install refrigeration lines/pipes between the inside and outside units. The refrigeration lines/pipes between the inside and outside units must be installed following a route and in a manner acceptable to the Contracting Officer Representative. Insulate all pipes with Armaflex |
| each |
| 40 |
| 9.4 |
| Install all pipes in Trunkings and provide for Air-conditioning drain. |
| each |
| 40 |
| 9.5 |
| Install thermostat holder. The location where the thermostat will be installed will be coordinated with the contracting Officer Representative. |
| each |
| 40 |
| 9.6 |
| Provide for an Isolation switch for the indoor and outdoor unit |
| each |
| 40 |
| 9.7 |
| Install electrical power and signal cable between indoor and outdoor unit. |
| each |
| 40 |
| 9.8 |
| The new AC units must be tested for proper operation. The contractor must demonstrate to the Contracting Officer Representatives that the system functions properly before the project will be accepted. |
| each |
| 40 |
| 9.9 |
| Carry out full service of the existing ACs as described in C.2.4 (c ) |
| each |
| 40 |
Total of all line-item prices:
Second option year total
The estimated amounts are based on total estimated Government requirements. This means that if more than one award is made, the estimated amount of work awarded under task order(s) to any single contractor will be less than the amount shown.
B.3.6
THIRD OPTION YEAR PRICES
| Item |
| Description |
| Unit |
| Quantity |
| Rate |
| Amount |
| 1.1 |
| Demolish existing concrete slab, remove debris from site and cart away to contractor's dump site(average thickness 150mm) |
| m³ |
| 7 |
| 1.2 |
| Demolish existing masonry wall including plaster, remove debris from site and cart away to contractor's dump site |
| m² |
| 70 |
| 1.3 |
| Carefully remove roof covering and all damaged purlin and roof structure, remove debris from site and cart away to contractor's dump site |
| m² |
| 60 |
| 1.4 |
| Remove existing gutters ,remove debris from and cart away to contractors dump site |
| m |
| 150 |
| 1.5 |
| Remove existing fascial board, remove debris from site and cart away to contractor’s dump site |
| m |
| 150 |
| 1.6 |
| Remove all existing wall tiles, remove debris from site and cart away to contractor's dump site |
| m |
| 60 |
| 1.7 |
| Remove all existing floor covering, remove debris from site and cart away to contractor's dump site |
| m² |
| 200 |
| 1.8 |
| Remove existing door frames including lintol , remove debris and hand over frame to client or cart away to contractor’s dump site |
| each |
| 15 |
| 1.9 |
| Remove existing window frames including lintol , remove debris and hand over frame to client or cart away to contractor's dump site |
| lot |
| 7 |
| 1.10 |
| Remove existing bathtub ,wash hand basin and toilet pan, clean drain and hand over to the COR |
| lot |
| 8 |
| 1.11 |
| Remove all plumbing piping , remove debris and cart away to contractor’s dump site |
| lot |
| 8 |
| 1.12 |
| Removing existing particle board/gypsum board ceiling including blundering, remove debris and cart away. |
| m² |
| 150 |
| 1.13 |
| Remove existing wall cabinets and hand over to the COR |
| lot |
| 7 |
| 1.14 |
| Remove existing curtain rails and supports. Hand over to the COR |
| m |
| 100 |
| 1.15 |
| Carefully remove all distribution panel boards including all cabling and take away from site |
| lot |
| 7 |
| 1.16 |
| Carefully remove all electrical light fittings including switches and cabling and take away from site |
| lot |
| 7 |
| 1.17 |
| Carefully remove all sockets including all cabling and take away from site |
| lot |
| 7 |
| 2.1 |
| Supply and cast plain concrete grade 20/20 mm aggregate. |
| m³ |
| 10 |
| 2.2 |
| Supply and cast vibrated reinforced concrete grade 25/20 mm aggregate. |
| m³ |
| 8 |
| 2.3 |
| Supply and lay deformed steel bars reinforcement (varies sizes) |
| kg |
| 100 |
| 2.4 |
| Supply and lay steel mesh fabric reinforcement conforce 257 allowing 200mm lap at joints |
| m² |
| 20 |
| 2.5 |
| Supply and lay steel mesh fabric reinforcement conforce 86 allowing 200mm lap at joints |
| m² |
| 25 |
| 2.6 |
| Formworks for sides of columns, steps edges of the beds |
| m² |
| 120 |
| 2.7 |
| Repair crack concrete screed chip off 25mm wide V joint seal with cement grout |
| m |
| 60 |
| 3.1 |
| Clear site of works of shrubs, bushes and trees |
| m² |
| 50 |
| 3.2 |
| Excavate around foundation not exceeding 1m deep |
| m³ |
| 10 |
| 3.3 |
| Excavate to remove top soil and load and cart away to contractors tipping site average depth 150mm |
| m² |
| 70 |
| 3.4 |
| load and cart away surplus spoil to contractor’s dump site |
| m³ |
| 60 |
| 3.5 |
| Backfill and compact in layers not exceeding 150mm |
| m³ |
| 90 |
| 3.6 |
| Supply and install 500 gauge polythene laid under surface beds |
| m² |
| 90 |
This is the start of the file's text. The full file is on GovTribe.
Department of State US Embassy Lusaka