RFQ.pdf

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER)

THIS RFQ IS X IS NOT A SMALL BUSINESS SET-ASIDE.

PAGE OF PAGES

1 13

1. REQUEST NO.

19-Q-33310

2. DATE ISSUED

4/8/2019

3. REQUISITION/PURCHASE REQUEST NO.

000HCCLG-2019-33310

4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY

Centers for Disease Control and Prevention/OCOO/OFR

Office of Acquisition Services - Branch 4

626 COCHRANS MILL RD

PITTSBURGH PA 15236-3611

6. DELIVERY BY (Date)

5b. FOR INFORMATION CALL (No collect calls) X

NAME TELEPHONE NUMBER

AREA CODE NUMBER

Abbie Jemmott ajemmott@cdc.gov

8. TO: 9. DESTINATION

a. NAME b. COMPANY a. NAME OF CONSIGNEE

NIOSH - Pittsburgh NPPTL

c. STREET ADDRESS b. STREET ADDRESS

626 Cochrans Mill Rd

c. CITY

Pittsburgh

d. CITY e. STATE f. ZIP CODE d. STATE e. ZIP CODE

PA 15236-3611

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

4/22/2019 no later than

11:00 AM EST

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services.

Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

0001 SEE SECTION B - LINE ITEMS FOR

NaCl test chamber

SEE SECTION B FIRM FIXED

PRICE

FIRM FIXED

PRICE TOTAL

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS

c. 30 CALENDAR DAYS

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER 14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

a. NAME OF QUOTER

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

c. COUNTY AREA CODE

d. CITY e. STATE f. ZIP CODE c. TITLE (Type or print) NUMBER

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

Previous edition not usable Prescribed by GSA FAR (48 CFR) 53.215-1(a)

7. DELIVERY

FOB

DESTINATION

OTHER

(See Schedule)

2 | P a g e

SECTION B - LINE ITEMS FOR

ITEM SUPPLIES / SERVICES

QTY / UNIT UNIT PRICE EXTENDED PRICE

0001 NaCl test chamber incorporating a tipping test platform in accordance with the attached Specifications.

3 | P a g e

SECTION C - CLAUSES FOR

FAR SOURCE, TITLE AND DATE

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016)

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016)

52.212-4 CONTRACT TERMS AND CONDITIONS- COMMERCIAL ITEMS (JAN 2017)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS CONTRACTORS (DEC 2013)

HHSAR SOURCE, TITLE AND DATE

352.222-70 CONTRACTOR COOPERATION IN EQUAL EMPLOYMENT OPPORTUNITY INVESTIGATIONS (DEC

2015)

FAR 52.252-2 -- CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/far1toc.htm http://www.hhs.gov/policies/hhsar/subpart301-1.html

(End of Clause)

FAR 52.212-5 -- CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS—COMMERCIAL ITEMS (JAN 2018)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004)(Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct

1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509)).

4 | P a g e

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009

(June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and

Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016)

(Pub. L. 109-282) (31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016)

(Pub. L. 111-117, section 743 of Div. C).

_X_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors

Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41

U.S.C. 2313).

__ (10) [Reserved].

__ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

__ (ii) Alternate I (Nov 2011) of 52.219-3.

__ (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT

2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (ii) Alternate I (JAN 2011) of 52.219-4.

__ (13) [Reserved]

_X_ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644).

__ (ii) Alternate I (Nov 2011).

__ (iii) Alternate II (Nov 2011).

__ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

__ (ii) Alternate I (Oct 1995) of 52.219-7.

__ (iii) Alternate II (Mar 2004) of 52.219-7.

_X_ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

__ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Nov 2016) of 52.219-9.

__ (v) Alternate IV (Nov 2016) of 52.219-9.

__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

__ (19) 52.219-14, Limitations on Subcontracting (Jan 2017) (15 U.S.C. 637(a)(14)).

__ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15

U.S.C. 657 f).

_X_ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C.

632(a)(2)).

__ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business

Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

_X_ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

_X_ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

_X_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

5 | P a g e

_X_ (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

__ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

_X_ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

__ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

__ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

_X_ (33)(i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O.

13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (34) 52.222-54, Employment Eligibility Verification (OCT 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

__ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May

2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons

(JUN 2016) (E.O. 13693).

__ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air

Conditioners (JUN 2016) (E.O. 13693).

__ (38)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and

13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

__ (39)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-14.

__ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b).

__ (41)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s

13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011)

(E.O. 13513).

__ (43) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (44) 52.223-21, Foams (JUN 2016) (E.O. 13693).

__ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

__ (ii) Alternate I (JAN 2017) of 52.224-3.

__ (46) 52.225-1, Buy American—Supplies (May 2014) (41 U.S.C. chapter 83).

_x_ (47)(i) 52.225-3, Buy American—Free Trade Agreements—Israeli Trade Act (May 2014) (41 U.S.C.

chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (May 2014) of 52.225-3.

__ (iii) Alternate II (May 2014) of 52.225-3.

_x_ (iv) Alternate III (May 2014) of 52.225-3.

__ (48) 52.225-5, Trade Agreements (OCT 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

6 | P a g e

__ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

__ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

__ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10

U.S.C. 2307(f)).

__ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

_X_ (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Jul 2013)

(31 U.S.C. 3332).

__ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (Jul

2013) (31 U.S.C. 3332).

__ (57) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

__ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

__ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).

__ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

__ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014)(E.O. 13495).

__ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

__ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple

Year and Option Contracts) (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards—Price Adjustment (May

2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment—Requirements (May 2014) (41 U.S.C. chapter 67).

__ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for

Certain Services—Requirements (May 2014) (41 U.S.C. chapter 67).

__ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

__ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

__ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792).

__ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records—Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any

7 | P a g e shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan

2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015

(Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include

52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iv) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015)

(vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212)

(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xi) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67).

(xii)

52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O 13627). Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O 13627).

(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for

Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xv) 52.222-54, Employment Eligibility Verification (OCT 2015) (E.O. 12989).

(xvi) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xvii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xviii)(A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xix) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xx) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792).

Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

8 | P a g e

(xxi) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-

64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

PAYMENT BY ELECTRONIC FUNDS TRANSFER (DEC 2005)

(a) The Government shall use electronic funds transfer to the maximum extent possible when making payments under this contract. FAR 52.232-33, Payment by Electronic Funds Transfer – Central Contractor Registration, requires the contractor to designate in writing a financial institution for receipt of electronic funds transfer payments.

(b) In addition to Central Contractor Registration, the contractor shall make the designation by submitting the form titled “ACH Vendor/Miscellaneous Payment Enrollment Form” to the address indicated below. Note: The form is either attached to this contract or may be obtained by contacting the Contracting Officer or the CDC Financial Management Office at (404)-718-8100.

(c) In cases where the contractor has previously provided such designation, i.e., pursuant to a prior contract/order, and been enrolled in the program, the form is not required unless the designated financial institution has changed.

(d) The completed form shall be mailed after award, but no later than 14 calendar days before an invoice is submitted, to the following address:

The Centers for Disease Control and Prevention Financial Management Office (FMO) P.O. Box 15580 Atlanta, GA 30333 Or – Fax copy to: 404-638-5342

CDCA_G001 – INVOICE SUBMISSION (JUL 2017)

(a) The Contractor shall submit the original contract invoice/voucher to the address shown below:

The Centers for Disease Control and Prevention Office of Financial Resources (OFR) P.O. Box 15580 Atlanta, GA 3033

Or – The Contractor may submit the original invoice via facsimile or email:

Fax: 404-638-5324

Email: FMOAPINV@CDC.GOV

NOTE: Submit to only one (1) of the above locations.

9 | P a g e

(b) The contractor shall submit 2 copies of the invoice to the cognizant contracting office previously identified in this contract. These invoice copies shall be addressed to the attention of the Contracting Officer.

(c) The Contractor is , is not required to submit a copy of each invoice directly to the Contracting

Officer’s Representative (COR) concurrently with submission to the Contracting Officer.

(d) In accordance with 5 CFR part 1315 (Prompt Payment), CDC's Office of Financial Resources is the designated billing office for the purpose of determining the payment due date under FAR 32.904.

(e) The Contractor shall include (as a minimum) the following information on each invoice:

(1) Contractor’s Name & Address

(2) Contractor’s Tax Identification Number (TIN)

(3) Purchase Order/Contract Number and Task Order Number, if Appropriate

(4) Invoice Number

(5) Invoice Date

(6) Contract Line Item Number and Description of Item

(7) Quantity

(8) Unit Price & Extended Amount for each line item

(9) Shipping and Payment Terms

(10) Total Amount of Invoice

(11) Name, title and telephone number of person to be notified in the event of a defective invoice

(12) Payment Address, if different from the information in (c)(1).

(13) DUNS + 4 Number

(14) Electronic funds transfer (EFT) banking information

CDC0_G008 CONTRACTING OFFICER’S REPRESENTATIVE (COR) (JUL 2017)

Performance of the work hereunder shall be subject to the technical directions of the designated COR for this contract.

As used herein, technical directions are directions to the Contractor which fill in details, suggests possible lines of inquiry, or otherwise completes the general scope of work set forth herein. These technical directions must be within the general scope of work, and may not alter the scope of work or cause changes of such a nature as to justify an adjustment in the stated contract price/cost, or any stated limitation thereof.

In the event that the Contractor believes full implementation of any of these directions may exceed the scope of the contract, he or she shall notify the originator of the technical direction and the Contracting Officer, immediately or as soon as possible, in a letter or e-mail separate of any required report(s). No technical direction, nor its fulfillment, shall alter or abrogate the rights and obligations fixed in this contract.

The Government COR is not authorized to change any of the terms and conditions of this contract. Contract changes shall be made only by the Contracting Officer by properly written modification(s) to the contract.

10 | P a g e

The Government will provide the Contractor with a copy of the COR delegation memorandum upon request.

CDC0_G009 CONTRACTING OFFICER (JUL 1999)

(a) The Contracting Officer is the only individual who can legally commit the Government to the expenditure of public funds. No person other than the Contracting Officer can make any changes to the terms, conditions, general provisions, or other stipulations of this contract.

(b) No information, other than that which may be contained in an authorized modification to this contract, duly issued by the Contracting Officer, which may be received from any person employed by the United States Government, or otherwise, shall be considered grounds for deviation from any stipulation of this contract.

ENGINEERING SPECIFICATIONS

Background and Need

The Research Branch of NIOSH NPPTL currently utilizes advanced respirator test headforms to perform research on the fitting characteristics of different classes of respiratory protection.

Advanced headforms have a silicone facial skin and may be mounted onto a manikin torso. This type of testing is currently performed in a sodium chloride aerosol (NaCl) test chamber. This engineering specification is for the acquisition of a new NaCl test chamber incorporating a tipping test platform. Our headforms with torsos will be mounted onto the tipping platform to simulate a “bending at the waist” motion.

Technical Requirements

1. General Chamber Information

a. The chamber shall be of dimensions: (length x width x height: 63” x 36” x 72”).

b. The chamber shall be built of sturdy framing which can easily be disassembled

(for example, 80/20 aluminum framing or similar type framing).

c. The chamber will not need gas-tight gaskets, as only non-toxic chemicals will be used for testing.

d. The chamber should be built in such a manner to mitigate shaking/vibration/jarring from the mechanical motion of the tilting platform (i.e., by incorporating vibration dampening materials as necessary).

2. Walls

a. All side walls and ceiling are to be of transparent 3/16” thick plastic sheeting

(polycarbonate or equivalent). Alternative thickness can be considered in necessary for the chamber design.

3. Door

a. The chamber shall have a hinged door to be the full height of the chamber and a minimum width of 30”.

4. Floor

a. The floor shall be made of sturdy materials and supports to allow a person to walk on the floor.

b. The chamber shall be assembled to directly sit on the laboratory floor. The chamber will not need wheels or legs.

5. Tipping Mechanism

a. A tipping mechanism shall be supplied to support the weight of a 50 pound manikin.

b. A mechanism such as a harnessing system shall be supplied for securing the manikin to the tipping platform.

c. The tipping mechanism shall be able to tilt the manikin to 90° from its upright starting position and then to return the manikin to its upright starting position.

d. Maximum speed: The tilting mechanism shall be capable of moving the manikin from its upright starting position to the 90° stopping position within 1 second. The tilting mechanism shall also be capable of moving the manikin from its 90° stopping position back to its upright starting position within 1 second.

e. The platform of the tilting mechanism shall be roughly 24” x 11.5”. These dimensions can vary based on the means of securing the manikin to the platform.

f. The platform shall be to the rear of the chamber, leaving 10” of clearance between the back of the manikin to the back wall of the chamber.

g. The test chamber will be filled with a dry NaCl aerosol, which can rust some metallic materials; thus, metallic parts that can rust with NaCl exposure need to be either external to the chamber or somehow protected to prevent rusting. Fans (described in Sect. 7) are replaceable materials and do not need to be protected from rusting.

h. Our laboratory room has standard 120V power and is also supplied with 200V- 220V, 1.5kw, 60Hz, 3-phase (4 wirings) power. The motor for the tipping mechanism can conform to either of these power options. Other power options can be considered if necessary.

6. Controls for Tipping Mechanism and Safety Features

a. The controls for the tipping mechanism shall enable the operator to program in the speed, degree of tipping, and number of repetitions of tipping cycles.

b. The controls shall enable the tipping mechanism to have smooth (no jarring movement).

c. The controls shall have an emergency stop button easily accessible to the operator.

d. The controls shall be configured so that the tipping mechanism only operates when the chamber door is closed.

7. Fans

a. Fans for mixing the chamber air shall be installed inside the chamber following these guidelines:

i. Fans shall be rated at 30 CFM (comparable item- Dayton model 4WT40).

ii. Fans shall have a screen on them to prevent bodily injury.

iii. Fans shall be mounted on brackets that allow some adjustment of direction.

iv. Fan location

1. Fans shall be placed at all top and bottom corners of the chamber and at all mid-point locations of the lengths of the chamber (both on the top and bottom). The total number of fans is 12.

v. All fans need power cords. Fans will run at full speed, so a variable power control mechanism is not required.

vi. The chamber needs an external switch (or switches) to power the fans on/off.

vii. Because fans are relatively inexpensive and expected to experience rusting in the NaCl aerosol environment, fans do not need to be protected from rusting. Fans should be mounted in a way that they can be replaced easily.

8. Drilled Pass-Through Holes

a. There will need to be numerous holes drilled in the walls of the chamber to allow the pass through of tubing.

i. One hole in the ceiling, ~3.25 in. diameter.

ii. A maximum of four holes, ~1.25 in. diameter.

iii. A maximum of four holes, ~1 in. diameter.

iv. Exact hole locations to be determined during the design process in communication with the awardee.

9. Vent

a. A vent shall be installed on one of the chamber walls

i. the vent does not require a fan.

ii. the vent is simply an opening that can be opened and closed to allow outside air to enter the chamber.

iii. the vent opening shall have an area of 7 in2.

iv. the vent location to be determined during the design process in communication with the awardee.

10. Hooks

a. The chamber shall a system of hooks or elements to hang tubing from in the proximity of the tipping platform.

b. The hooks or hanging elements will need to be affixed to the chamber ceiling and walls in proximity of the tipping platform.

11. Electrical Outlets

a. The chamber will need 2 duplex 120V electrical receptacles mounted inside the chamber.

12. Delivery/Assembly/Set-Up/Installation

a. The awardee will deliver, assemble, set-up, and install the chamber at the NIOSH facility, Building 13, Room 210, 626 Cochran’s Mill Rd., Pittsburgh, PA 15236.

b. Materials wider than 33” will not fit through the laboratory door, thus much of the assembly may need to be done onsite in Building 13, Room 210.

13. Warranty

a. A one-year warranty on parts and labor is required.