Q and A for 19PR5024Q0054.pdf
PDF 128 KB Posted
- Attached to
- Safety/Protective Equipment Federal contract opportunity
- Solicitation number
- 19PE5024Q0054
- Issued by
- Department of State US Embassy Lima
About this file
This document is a Question and Answer (Q&A) sheet for Request for Quotation (RFQ) 19PE5024Q0054 for the procurement of safety/protective equipment for the International Narcotics and Law Enforcement Section (INL) of the U.S. Embassy in Lima, Peru.
The key details are:
- Vendors cannot locate half sizes for the Tingley Hazproof boots, so whole sizes from 6-13 will be accepted.
- The RFQ was amended to clarify the required quantities for size XL protective gloves.
- The required specifications for the protective butyl gloves are a minimum thickness of 15mm and full length to cover the suit wrists.
- The government did not specify a make/model for the HAZMAT Intelligent Paper Detector, and a 5"x7" detection card will not be acceptable.
- The government granted a 1-week extension to the RFQ closing date, moving it to July 8, 2024.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SF - 30 for 19PE5024Q0054 - P002.pdf | ||
| SF - 30 for 19PE5024Q0054.pdf | ||
| RFQ 19PE5024Q0054 Safety protective equipment.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q&A sheet for RFQ 19PE5024Q0054
• Question: SECTION 1, Page 3, Item 02 - Can the Government be advised that half sizes are not available on the Tingley Hazproof boots that are pictured? Whole sizes are available from 6-13. Please advise on what alternate sizes will be acceptable.
Answer: If the vendor cannot locate half sizes, they are welcome to provide alternative size quantities in their quotation.
• Question: SECTION 1, Page 3, Item 04 - Can the Government confirm that 10 pairs of size XL or 10 are required? It looks like the last line was cut off.
Answer: See SF-30 for RFQ 19PE5024Q0054 – P0001 updated to show the missing sizes.
• Question: SECTION 1, Page 4, Item 04 - Can the Government confirm the mil thickness, length and finish required for the protective butyl gloves?
Answer: Minimum 15 mm thickness, must be full length to cover particulate/chemical suit wrists (which is the case for Level C & B), no specific finish is required
• Question: NOTICE OF RFQ CLOSING DATE, Page 8 - Will the Government grant a 1-week extension to July 8, 2024?
Answer: yes
• Question: SECTION 1, Page 4, Item 04 - Can the Government confirm the make and model specified in the image for the HAZMAT Intelligent Paper Detector?
Answer: No Question: Would a 5"x7" detection card be acceptable?
Answer: No
File details come from the government source that posted it. Updated .