1832443Capspec.xls

This is a specification document for a fiberglass truck cap procurement by the State of Maine. The specification details requirements for a single fiberglass truck cap designed for a 2013 Ford F150 4-wheel drive extended cab with a short bed. The cap shall be white, cab-high style with sliding side windows equipped with screens, a standard front window, and all window handles to include weather covers for locks. The truck cap must feature a reinforced roof, clear glass, black window beading, 360-degree visibility windows, a recessed third brake light, two gas props per door, radius corners, a dust seal on the tailgate, four aluminum hold-down clamps (or eight with external cap racks if applicable), and two key sets with sufficient cap tape for proper installation and weatherproofing.

The vendor is required to install the truck cap and all accessories on the vehicle at their location and must provide vehicle pickup and delivery service from and to CFM in Augusta. The specification prohibits the use of Scotch-Lok style connectors and requests that bidders provide unit cost, total cost, estimated delivery time, vendor contact information, and any relevant comments. The document includes a spreadsheet format for bidder submission with columns for make/model, possible quantity, unit cost, total cost, bidder/vendor information, contact person details, telephone number, vendor comments, and estimated time for delivery.