11 - Amendment P00004.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

P00004

Jim D. Seratt

Amendment P00004 is hereby issued to extend the deadline for receipt of bids until Friday, June 19, 2020 at 2:00 pm Central Time. The deadline for receipt of questions is extended until June 5, 2020 at 2:00 pm Central Time.

In addition, the continuation pages detail further changes to the solicitation.

Federal Bureau of Prisons Field Acquisition Office 346 Marine Forces Drive Grand Prairie, TX 75051

Federal Bureau of Prisons FCI Texarkana 4001 Leopard Drive Texarkana, TX 75501

RP# 0110-20

15B51520B00000001

5D1S

1 2

05/18/2020

02/28/2020

1) Delete the document “3 – Attachment 1 – Specifications” in its entirety.

2) Add the document “12 - Attachment 1 – Specifications Revised.” Changes to original specifications are marked in red.

3) Add the following requirements to the document “Attachment 1 – Specifications Revised.”

A) The owner determined a need to change the permissible location of new Food Service fire risers. The previously selected room has been found unsuitable for new riser installation. Refer to the revised drawings.

B) The owner determined a need to revise the scope of fire alarm work in Food Service to the following: Existing Fire Alarm Control Panel shall be replaced. Devices connected to this panel shall be replaced. Monitoring modules shall be installed at three new riser locations and wired to the new panel. Refer to added Food Service Fire Alarm Inspection for device quantities.

C) The owner decided to require replacement of the existing front-end fire alarm control panel in the Control Center to accommodate expansion of the campus fire alarm system required by this project. All remote fire alarm panels installed as part of this project shall be networked to this replacement panel. A keypad annunciator shall be provided in Control Center room to notify officers of an alarm throughout the campus.

D) The owner has elected to retain the existing Fire Alarm Control Panel in the Training Center building. All new devices shall be tied into this panel.

4) Delete the document “4 – Attachment 2 – Drawings” in its entirety.

5) Add the document “13 - Attachment 2 – Drawings Revised.” Changes to the original drawings are marked in red.

6) Add the document “14 - Requests for Information #1.”

7) Add the document “15 - Hydrant Flow Test.”

8) Add the document “16 - Reference Drawing – Fiber Switch Locations.”

9) Add the document “17 - Fire Alarm Inspection Certificates.”[End of Amendment]