Aerco_Smart_Plate_Info_CUT_SHEET.pdf

The AERCO SmartPlate water heater is designed to satisfy potable water heating needs in commercial and institutional environments.

The packaged system incorporates simple, easy to understand, real-time, load tracking and responsive controls to maintain accurate hot water temperatures under diversified load patterns.

Packaged with a PID temperature controller and a 3-way electronic control valve, the heater maintains outstanding temperature control when operated under constant load conditions with variances held to ±4°F under normal load changes.* An integrated load monitoring system and high turndown electronic control valve deliver accurate temperature control without the need for storage tanks, blending valves or other temperature averaging components. The heater can be remotely monitored and/or fully integrated with BAS software via Modbus communications protocol.

The packaged heater consists of a counter flow, stainless steel, plate and frame heat exchanger – the most efficient water-to-water heat exchanger design available for potable water heating. Ideal for use with condens-ing boilers, the SmartPlate heater utilizes boiler water as little as 5°F above the required potable water tem-perature, resulting in the highest possible boiler efficiency and minimal radiation losses. To ensure longevity, all water wetted (potable water side) parts are stainless steel, copper or copper alloy materials.

The unit’s instantaneous design is compatible with low temperature boiler water. And installation is easy because of its small footprint and doorway size. Single point header connections for Domestic Hot Water, Cold Water, Boiler Water Inlet, Boiler Water Outlet, and electrical power supply are all that is required for a fully func-tional, safe, and efficient system. Tight temperature control, high thermal efficiency, low maintenance, longevi-ty and overall reliability make the SmartPlate heater the most logical choice for any commercial or institutional domestic water-to-water heating installation.

Features Supports Multiple Applications

*Incremental change in flow that does not exceed 50% of total capacity; i.e., demand change from 0 to 50% or 20 to 70%

Technical Data Sheet

SmartPlate Single Wall Water-to-Water Heater

• Accurate Temperature Control ±4°F*

• Packaged with 3-Way Electronic Control Valve

• Fully Modulating Variable Primary Input

• Compact Footprint <10 ft2

• All Stainless Steel, Copper or Copper Alloy Wetted

(Potable Water Side) Surfaces

• Integral Constant Speed Domestic Water Recircula-tion Pump

• ASME B&PV Code Section VIII Division 1 Stamped

• Domestic Hot Water solution with AERCO Benchmark Boilers

• LTBW; Up to 150 PSIG, 250°F

• DHW: Up to 200 psig

• Set Point Range 50°F to 180°F

• Single or Multiple Installations

• Supports 2-Way or 3-Way Applications

• Ideal for New or Retrofit

• Swimming Pool Applications (maximum 2ppm free chlorine)

Dimensions

Specifications

Available Options Dry contacts for remote “High Limit Tripped Status” indication.

Represented by:

Specifications subject to change without prior notice.

Consult aerco.com or contact AERCO.

SmartPlate SW 01/2016

AERCO International Inc. | 100 Oritani Drive | Blauvelt, NY 10913 | p 845.580.8000 | f 845.580.8090 | aerco.com

Domestic Water Pressure Drop 8PSIG @ max. rated flow

Ambient Operating Temperature 0°F to 131°F

Electrical Requirements 120/1/60 Hz 2 Amp, 220/1/50 Hz 2 Amp

Standby Amperage Draw 2 Amp

High Limit “Tripped” Amperage Draw 2 Amp

Max. Continuous Water Flow Rate 90 GPM

Max. Boiler Water Pressure & Temperature 150 PSIG @250°F

Max. Domestic Water Operating Pressure 200 PSIG

Adjustable Temperature Control up to 180°F

Adjustable High Limit Control up to 200°F

Water Connection Inlets/Outlets 1.5” FNPT (Models SP23 & SP33), 2” FNPT (All other models)

Weight (lbs.) SP23 320 (dry), 340 (installed), SP33 340 (dry), 370 (installed) SP45 400 (dry), 440 (installed), SP69 450 (dry), 500 (installed) SP150 610 (dry), 710 (installed)