15B21718Q00000006.pdf

U.S. Department of Justice Federal Bureau of Prisons Administration Division

Field Acquisition Office Grand Prairie, Texas 75051

RE: Request for Quote 15B21718Q00000006 Solid Waste Removal Services Federal Detention Center (FDC) – Philadelphia, Pennsylvania

Dear Quoter:

Attached is a solicitation package prepared by the Federal Bureau of Prisons, Field Acquisition Office, for the provision of Solid Waste Removal Services for FDC Philadelphia. This package contains all necessary information to submit a quote.

When submitting your quote, you shall consider all information provided herein. Please carefully follow all instructions located on pages 19-20 of the solicitation package concerning content, format, and submission of quotes.

All potential quoters are advised that this solicitation includes the clause at FAR 52.212-4 for Commercial Items. Paragraph (t), System for Award Management (SAM), of this clause requires that all quoters doing business with the Federal Government to be registered in the SAM database. Quoters should include their Data Universal Number System (DUNS) number in their quotes. The Contracting Officer will verify registration in the SAM database prior to award by entering the potential awardees DUNS number into the SAM database. Failure to complete the registration procedures outlined in this clause may result in elimination from consideration for award. For the purposes of this solicitations, all quoters SAM registration shall include NAICS code 562111.

If you have questions about the System for Award Management (SAM), Government procurements in general, or need assistance in the preparation of your quote, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.

Quotes shall be received on or before the deadline of May 31, 2018, at 1:00 p.m. Central Time. Quotes shall be submitted electronically via email to jseratt@bop.gov in pdf format only and will be deemed received at the time as indicated on the email notification. Faxed and hand delivered quotes will not be accepted. Quotes received after the quote deadline will be handled in accordance with FAR 212-1(f).

Please submit any questions you may have in writing. Questions may be submitted via email to jseratt@bop.gov.

Sincerely, //s// Jim D. Seratt, Contracting Officer

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24 & 30

1. REQUISITION NUMBER

5. SOLICITATION NUMBER

15B21718Q00000006

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 6. SOLICITATION ISSUE

DATE

05/10/2018

7. FOR SOLICITATION INFORMATION

CALL:

a. NAME

Jim D. Seratt; jseratt@bop.gov

b. TELEPHONE NUMBER (No collect calls)

972-352-4517

8. OFFER DUE DATE / LOCAL

TIME

05/31/2018 1:00 pm CT

CODE 15BFA0

Federal Bureau of Prisons Field Acquisition Office U.S. Armed Forces Reserve Complex 346 Marine Forces Drive Grand Prairie, TX 75051

9. ISSUED BY UNRESTRICTED OR X SET ASIDE:100.00 % FOR

X SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS: 562111

SIZE STANDARD: $38,500,000

10. THE ACQUISITION IS

SEE

SCHEDULE

11. DELIVERY FOR FOB DESTINATION

UNLESS BLOCK IS MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER DPAS

(15 CFR 700)

13b. RATING

X RFQ IFB RFP

14. METHOD OF SOLICITATION

15B217CODE15. DELIVER TO

Federal Bureau of Prisons FDC Philadelphia 700 Arch Street Philadelphia, PA 19106

CODE 15B20416. ADMINISTERED BY

Federal Bureau of Prisons FCI Fairton 655 Fairton-Millville Road Fairton, NJ 08320

FACILITY

CODE

CODE

TELEPHONE NO.

17a. CONTRACTOR/

OFFEROR

BFAICODE18a. PAYMENT WILL BE MADE BY

Federal Bureau of Prisons FCI Fairton

PO BOX 280

Fairton, NJ 08320-0280

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER SEE ADDENDUM

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS

CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

Solid Waste Removal Services to be performed in accordance with the Statement of Work.

See Continuation Sheet(s) (Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

X 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA X ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 1 COPIES TO

ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE

TERMS AND CONDITIONS SPECIFIED.

29. AWARD OF CONTRACT: REF. _____________________________ OFFER

DATED _________________ . YOUR OFFER ON SOLICITATION (BLOCK 5)

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN,

IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF THE CONTRACTING OFFICER (TYPE OR PRINT)

Jim Seratt

31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

15B21718Q00000006

WD 15-4233 (Rev.-7) was first posted on www.wdol.gov on 01/16/2018

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4233

Daniel W. Simms Division of | Revision No.: 7 Director Wage Determinations| Date Of Revision: 01/10/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts State: Pennsylvania

Area: Pennsylvania Counties of Delaware, Philadelphia

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 16.45 01012 - Accounting Clerk II 18.46 01013 - Accounting Clerk III 20.66 01020 - Administrative Assistant 27.97 01035 - Court Reporter 26.30 01041 - Customer Service Representative I 14.21 01042 - Customer Service Representative II 15.99 01043 - Customer Service Representative III 17.45 01051 - Data Entry Operator I 15.64 01052 - Data Entry Operator II 17.06 01060 - Dispatcher, Motor Vehicle 17.92 01070 - Document Preparation Clerk 14.83 01090 - Duplicating Machine Operator 14.83 01111 - General Clerk I 13.55 01112 - General Clerk II 14.79 01113 - General Clerk III 16.61 01120 - Housing Referral Assistant 24.11 01141 - Messenger Courier 13.87 01191 - Order Clerk I 14.81 01192 - Order Clerk II 16.12 01261 - Personnel Assistant (Employment) I 16.56 01262 - Personnel Assistant (Employment) II 18.52 01263 - Personnel Assistant (Employment) III 20.64 01270 - Production Control Clerk 24.74 01290 - Rental Clerk 16.83 01300 - Scheduler, Maintenance 19.12 01311 - Secretary I 19.12 01312 - Secretary II 21.84 01313 - Secretary III 24.11

3/30/2018https://wdol.gov/wdol/scafiles/std/15-4233.txt?v=7

Attachment I - DOL Wage Determination

01320 - Service Order Dispatcher 16.76 01410 - Supply Technician 27.97 01420 - Survey Worker 17.92 01460 - Switchboard Operator/Receptionist 14.72 01531 - Travel Clerk I 13.50 01532 - Travel Clerk II 14.24 01533 - Travel Clerk III 15.18 01611 - Word Processor I 15.91 01612 - Word Processor II 17.86 01613 - Word Processor III 19.98 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 22.83 05010 - Automotive Electrician 22.03 05040 - Automotive Glass Installer 20.34 05070 - Automotive Worker 21.11 05110 - Mobile Equipment Servicer 19.63 05130 - Motor Equipment Metal Mechanic 22.83 05160 - Motor Equipment Metal Worker 21.22 05190 - Motor Vehicle Mechanic 22.83 05220 - Motor Vehicle Mechanic Helper 18.71 05250 - Motor Vehicle Upholstery Worker 20.54 05280 - Motor Vehicle Wrecker 21.22 05310 - Painter, Automotive 22.14 05340 - Radiator Repair Specialist 21.22 05370 - Tire Repairer 14.89 05400 - Transmission Repair Specialist 23.49 07000 - Food Preparation And Service Occupations 07010 - Baker 14.24 07041 - Cook I 13.44 07042 - Cook II 14.49 07070 - Dishwasher 9.85 07130 - Food Service Worker 11.55 07210 - Meat Cutter 17.76 07260 - Waiter/Waitress 10.62 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.40 09040 - Furniture Handler 17.39 09080 - Furniture Refinisher 22.85 09090 - Furniture Refinisher Helper 19.50 09110 - Furniture Repairer, Minor 21.21 09130 - Upholsterer 19.41 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 12.81 11060 - Elevator Operator 12.81 11090 - Gardener 16.09 11122 - Housekeeping Aide 12.81 11150 - Janitor 12.81 11210 - Laborer, Grounds Maintenance 13.67 11240 - Maid or Houseman 13.13 11260 - Pruner 12.83 11270 - Tractor Operator 15.33 11330 - Trail Maintenance Worker 13.76 11360 - Window Cleaner 13.61 12000 - Health Occupations 12010 - Ambulance Driver 17.48 12011 - Breath Alcohol Technician 20.44 12012 - Certified Occupational Therapist Assistant 23.32 12015 - Certified Physical Therapist Assistant 24.55 12020 - Dental Assistant 18.36 12025 - Dental Hygienist 36.28 12030 - EKG Technician 30.31

12035 - Electroneurodiagnostic Technologist 30.31 12040 - Emergency Medical Technician 17.48 12071 - Licensed Practical Nurse I 20.15 12072 - Licensed Practical Nurse II 22.41 12073 - Licensed Practical Nurse III 24.98 12100 - Medical Assistant 15.97 12130 - Medical Laboratory Technician 21.17 12160 - Medical Record Clerk 16.58 12190 - Medical Record Technician 18.55 12195 - Medical Transcriptionist 19.68 12210 - Nuclear Medicine Technologist 42.00 12221 - Nursing Assistant I 11.44 12222 - Nursing Assistant II 12.86 12223 - Nursing Assistant III 14.04 12224 - Nursing Assistant IV 15.76 12235 - Optical Dispenser 21.62 12236 - Optical Technician 16.60 12250 - Pharmacy Technician 16.15 12280 - Phlebotomist 17.17 12305 - Radiologic Technologist 32.80 12311 - Registered Nurse I 29.51 12312 - Registered Nurse II 32.76 12313 - Registered Nurse II, Specialist 32.76 12314 - Registered Nurse III 39.32 12315 - Registered Nurse III, Anesthetist 39.32 12316 - Registered Nurse IV 47.11 12317 - Scheduler (Drug and Alcohol Testing) 23.50 12320 - Substance Abuse Treatment Counselor 22.07 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.74 13012 - Exhibits Specialist II 28.77 13013 - Exhibits Specialist III 35.16 13041 - Illustrator I 22.94 13042 - Illustrator II 30.61 13043 - Illustrator III 37.43 13047 - Librarian 31.00 13050 - Library Aide/Clerk 16.83 13054 - Library Information Technology Systems 27.98 Administrator 13058 - Library Technician 18.48 13061 - Media Specialist I 18.83 13062 - Media Specialist II 21.07 13063 - Media Specialist III 23.49 13071 - Photographer I 17.96 13072 - Photographer II 19.97 13073 - Photographer III 25.04 13074 - Photographer IV 30.62 13075 - Photographer V 37.06 13090 - Technical Order Library Clerk 15.97 13110 - Video Teleconference Technician 22.29 14000 - Information Technology Occupations 14041 - Computer Operator I 18.50 14042 - Computer Operator II 20.70 14043 - Computer Operator III 23.06 14044 - Computer Operator IV 25.64 14045 - Computer Operator V 28.39 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.50 14160 - Personal Computer Support Technician 25.64 14170 - System Support Specialist 29.79 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.14 15020 - Aircrew Training Devices Instructor (Rated) 40.11 15030 - Air Crew Training Devices Instructor (Pilot) 48.06 15050 - Computer Based Training Specialist / Instructor 33.14 15060 - Educational Technologist 30.33 15070 - Flight Instructor (Pilot) 48.06 15080 - Graphic Artist 29.40 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 42.40 15086 - Maintenance Test Pilot, Rotary Wing 42.40 15088 - Non-Maintenance Test/Co-Pilot 42.40 15090 - Technical Instructor 24.65 15095 - Technical Instructor/Course Developer 30.17 15110 - Test Proctor 19.91 15120 - Tutor 19.91 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 10.53 16030 - Counter Attendant 10.53 16040 - Dry Cleaner 13.29 16070 - Finisher, Flatwork, Machine 10.53 16090 - Presser, Hand 10.53 16110 - Presser, Machine, Drycleaning 10.53 16130 - Presser, Machine, Shirts 10.53 16160 - Presser, Machine, Wearing Apparel, Laundry 10.53 16190 - Sewing Machine Operator 14.24 16220 - Tailor 15.18 16250 - Washer, Machine 11.46 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 24.49 19040 - Tool And Die Maker 28.13 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 20.41 21030 - Material Coordinator 24.43 21040 - Material Expediter 24.43 21050 - Material Handling Laborer 13.92 21071 - Order Filler 13.88 21080 - Production Line Worker (Food Processing) 20.41 21110 - Shipping Packer 16.58 21130 - Shipping/Receiving Clerk 16.58 21140 - Store Worker I 16.93 21150 - Stock Clerk 20.25 21210 - Tools And Parts Attendant 20.41 21410 - Warehouse Specialist 20.41 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 30.93 23019 - Aircraft Logs and Records Technician 26.68 23021 - Aircraft Mechanic I 29.77 23022 - Aircraft Mechanic II 30.93 23023 - Aircraft Mechanic III 31.93 23040 - Aircraft Mechanic Helper 24.54 23050 - Aircraft, Painter 26.21 23060 - Aircraft Servicer 26.68 23070 - Aircraft Survival Flight Equipment Technician 26.21 23080 - Aircraft Worker 27.74 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 27.74 I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 29.77

II

23110 - Appliance Mechanic 21.01 23120 - Bicycle Repairer 15.78 23125 - Cable Splicer 37.49 23130 - Carpenter, Maintenance 27.39 23140 - Carpet Layer 25.37 23160 - Electrician, Maintenance 30.53 23181 - Electronics Technician Maintenance I 25.72 23182 - Electronics Technician Maintenance II 27.03 23183 - Electronics Technician Maintenance III 27.92 23260 - Fabric Worker 24.41 23290 - Fire Alarm System Mechanic 23.71 23310 - Fire Extinguisher Repairer 23.52 23311 - Fuel Distribution System Mechanic 26.86 23312 - Fuel Distribution System Operator 23.17 23370 - General Maintenance Worker 21.37 23380 - Ground Support Equipment Mechanic 29.77 23381 - Ground Support Equipment Servicer 26.68 23382 - Ground Support Equipment Worker 27.74 23391 - Gunsmith I 23.52 23392 - Gunsmith II 25.37 23393 - Gunsmith III 27.22 23410 - Heating, Ventilation And Air-Conditioning 26.24 Mechanic 23411 - Heating, Ventilation And Air Contidioning 27.26 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 27.34 23440 - Heavy Equipment Operator 27.08 23460 - Instrument Mechanic 27.22 23465 - Laboratory/Shelter Mechanic 26.29 23470 - Laborer 15.83 23510 - Locksmith 24.74 23530 - Machinery Maintenance Mechanic 25.46 23550 - Machinist, Maintenance 21.39 23580 - Maintenance Trades Helper 18.52 23591 - Metrology Technician I 27.22 23592 - Metrology Technician II 28.28 23593 - Metrology Technician III 29.18 23640 - Millwright 26.09 23710 - Office Appliance Repairer 23.06 23760 - Painter, Maintenance 23.58 23790 - Pipefitter, Maintenance 31.52 23810 - Plumber, Maintenance 30.44 23820 - Pneudraulic Systems Mechanic 27.22 23850 - Rigger 27.22 23870 - Scale Mechanic 25.37 23890 - Sheet-Metal Worker, Maintenance 29.64 23910 - Small Engine Mechanic 21.81 23931 - Telecommunications Mechanic I 26.93 23932 - Telecommunications Mechanic II 27.98 23950 - Telephone Lineman 32.34 23960 - Welder, Combination, Maintenance 22.27 23965 - Well Driller 27.22 23970 - Woodcraft Worker 27.22 23980 - Woodworker 23.16 24000 - Personal Needs Occupations 24550 - Case Manager 15.26 24570 - Child Care Attendant 12.00 24580 - Child Care Center Clerk 14.96 24610 - Chore Aide 11.62

24620 - Family Readiness And Support Services 15.26 Coordinator 24630 - Homemaker 15.26 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 27.50 25040 - Sewage Plant Operator 22.70 25070 - Stationary Engineer 27.50 25190 - Ventilation Equipment Tender 22.45 25210 - Water Treatment Plant Operator 22.70 27000 - Protective Service Occupations 27004 - Alarm Monitor 20.30 27007 - Baggage Inspector 13.48 27008 - Corrections Officer 24.29 27010 - Court Security Officer 27.70 27030 - Detection Dog Handler 18.81 27040 - Detention Officer 24.29 27070 - Firefighter 32.98 27101 - Guard I 13.48 27102 - Guard II 18.81 27131 - Police Officer I 31.00 27132 - Police Officer II 34.45 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.46 28042 - Carnival Equipment Repairer 12.02 28043 - Carnival Worker 9.59 28210 - Gate Attendant/Gate Tender 16.72 28310 - Lifeguard 12.78 28350 - Park Attendant (Aide) 18.71 28510 - Recreation Aide/Health Facility Attendant 13.65 28515 - Recreation Specialist 23.17 28630 - Sports Official 14.89 28690 - Swimming Pool Operator 17.23 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 26.73 29020 - Hatch Tender 26.73 29030 - Line Handler 26.73 29041 - Stevedore I 25.72 29042 - Stevedore II 27.72 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 40.39 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 27.85 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 30.68 30021 - Archeological Technician I 20.33 30022 - Archeological Technician II 22.75 30023 - Archeological Technician III 28.18 30030 - Cartographic Technician 28.27 30040 - Civil Engineering Technician 26.93 30051 - Cryogenic Technician I 27.36 30052 - Cryogenic Technician II 30.22 30061 - Drafter/CAD Operator I 20.33 30062 - Drafter/CAD Operator II 22.75 30063 - Drafter/CAD Operator III 25.36 30064 - Drafter/CAD Operator IV 31.21 30081 - Engineering Technician I 18.23 30082 - Engineering Technician II 20.47 30083 - Engineering Technician III 23.23 30084 - Engineering Technician IV 28.83 30085 - Engineering Technician V 35.18 30086 - Engineering Technician VI 42.58 30090 - Environmental Technician 26.00 30095 - Evidence Control Specialist 24.71

30210 - Laboratory Technician 25.35 30221 - Latent Fingerprint Technician I 23.82 30222 - Latent Fingerprint Technician II 26.31 30240 - Mathematical Technician 28.18 30361 - Paralegal/Legal Assistant I 19.08 30362 - Paralegal/Legal Assistant II 23.64 30363 - Paralegal/Legal Assistant III 28.92 30364 - Paralegal/Legal Assistant IV 34.64 30375 - Petroleum Supply Specialist 30.22 30390 - Photo-Optics Technician 28.18 30395 - Radiation Control Technician 30.22 30461 - Technical Writer I 25.02 30462 - Technical Writer II 30.62 30463 - Technical Writer III 37.04 30491 - Unexploded Ordnance (UXO) Technician I 25.08 30492 - Unexploded Ordnance (UXO) Technician II 30.34 30493 - Unexploded Ordnance (UXO) Technician III 36.37 30494 - Unexploded (UXO) Safety Escort 25.08 30495 - Unexploded (UXO) Sweep Personnel 25.08 30501 - Weather Forecaster I 30.11 30502 - Weather Forecaster II 33.29 30620 - Weather Observer, Combined Upper Air Or (see 2) 25.36 Surface Programs 30621 - Weather Observer, Senior (see 2) 28.18 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.34 31020 - Bus Aide 15.22 31030 - Bus Driver 19.16 31043 - Driver Courier 18.13 31260 - Parking and Lot Attendant 10.54 31290 - Shuttle Bus Driver 19.00 31310 - Taxi Driver 12.47 31361 - Truckdriver, Light 19.00 31362 - Truckdriver, Medium 19.28 31363 - Truckdriver, Heavy 19.99 31364 - Truckdriver, Tractor-Trailer 19.99 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.79 99030 - Cashier 11.80 99050 - Desk Clerk 13.24 99095 - Embalmer 34.20 99130 - Flight Follower 25.08 99251 - Laboratory Animal Caretaker I 11.68 99252 - Laboratory Animal Caretaker II 12.25 99260 - Marketing Analyst 30.51 99310 - Mortician 34.20 99410 - Pest Controller 18.31 99510 - Photofinishing Worker 14.65 99710 - Recycling Laborer 18.72 99711 - Recycling Specialist 21.14 99730 - Refuse Collector 17.57 99810 - Sales Clerk 12.43 99820 - School Crossing Guard 11.48 99830 - Survey Party Chief 21.84 99831 - Surveying Aide 12.96 99832 - Surveying Technician 19.15 99840 - Vending Machine Attendant 15.90 99841 - Vending Machine Repairer 18.68 99842 - Vending Machine Repairer Helper 15.90

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.41 per hour or $176.40 per week or $764.40 per month

HEALTH & WELFARE EO 13706: $4.13 per hour, or $165.20 per week, or $715.87 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).

Section 2 - Commodity or Services Schedule

SCHEDULE OF SUPPLIES/SERVICES

CONTINUATION SHEET

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Base Year: Estimated Maximum.

Rental of 32 cubic yard compactor.

12.000000 MO $____________ $___________________

0002 Base Year: Estimated Maximum.

Pull fee for 32 cubic yard compactor.

124.000000 EA $____________ $___________________

0003 Base Year: Estimated Maximum.

Per Ton disposal fee for an estimated 535 tons of solid waste.

535.000000 TN $____________ $___________________

0004 Base Year: Estimated Maximum.

Trip charge for Government caused inability to pull compactor according to the Schedule identified in the Statement of Work.

12.000000 EA $____________ $___________________

0005 Option Year 1: Estimated Maximum.

Rental of 32 cubic yard compactor.

12.000000 MO $____________ $___________________

0006 Option Year 1: Estimated Maximum.

Pull fee for 32 cubic yard compactor.

124.000000 EA $____________ $___________________

0007 Option Year 1: Estimated Maximum.

Per Ton disposal fee for an estimated 535 tons of solid waste.

535.000000 TN $____________ $___________________

0008 Option Year 1: Estimated Maximum.

Trip charge for Government caused inability to pull compactor according to the Schedule identified in the Statement of Work.

12.000000 EA $____________ $___________________

0009 Option Year 2: Estimated Maximum.

Rental of 32 cubic yard compactor.

12.000000 MO $____________ $___________________

0010 Option Year 2: Estimated Maximum.

Pull fee for 32 cubic yard compactor.

124.000000 EA $____________ $___________________

0011 Option Year 2: Estimated Maximum.

Per Ton disposal fee for an estimated 535 tons of solid waste.

535.000000 TN $____________ $___________________

0012 Option Year 2: Estimated Maximum.

Trip charge for Government caused inability to pull compactor according to the Schedule identified in the Statement of Work.

12.000000 EA $____________ $___________________

0013 Option Year 3: Estimated Maximum.

Rental of 32 cubic yard compactor.

12.000000 MO $____________ $___________________

0014 Option Year 3: Estimated Maximum.

Pull fee for 32 cubic yard compactor.

124.000000 EA $____________ $___________________

0015 Option Year 3: Estimated Maximum.

Per Ton disposal fee for an estimated 535 tons of solid waste.

535.000000 TN $____________ $___________________

0016 Option Year 3: Estimated Maximum.

Trip charge for Government caused inability to pull compactor according to the Schedule identified in the Statement of Work.

12.000000 EA $____________ $___________________

0017 Option Year 4: Estimated Maximum.

Rental of 32 cubic yard compactor.

12.000000 MO $____________ $___________________

0018 Option Year 4: Estimated Maximum.

Pull fee for 32 cubic yard compactor.

124.000000 EA $____________ $___________________

0019 Option Year 4: Estimated Maximum.

Per Ton disposal fee for an estimated 535 tons of solid waste.

535.000000 TN $____________ $___________________

0020 Option Year 4: Estimated Maximum.

Trip charge for Government caused inability to pull compactor according to the Schedule identified in the Statement of Work.

12.000000 EA $____________ $___________________

Continuation of Standard Form 1449

Section 2.1 – Pricing Methodology

Quoters are required to submit, as part of their quote, a completed copy of Section 2, “Commodity or Services Schedule.” The quantity of services to be provided by the Contractor is estimated. These estimates are not a representation to a quoter or contractor that the estimated quantities will be required or ordered, or that conditions affecting requirements will remain stable or normal. Contract pricing shall include all charges to the Government for providing the services required by this solicitation/contract.

Pursuant to FAR 17.203(b), the Government’s evaluation shall be inclusive of options. The Government will evaluate quotes for award purposes by adding the total price of all options to the total price of the base year requirement. Pursuant to FAR 17.203(d), the quoters may offer varying prices for options, depending on the quantities actually ordered and the dates when ordered.

2.2 Statement of Work

Introduction:

The Federal Bureau of Prisons, Field Acquisition Office in Grand Prairie, Texas, intends to make a single award for the provision of Solid Waste Removal Services for the Federal Detention Center (FDC), located in Philadelphia, Pennsylvania. The contract type is an indefinite delivery / requirements contract with firm-fixed prices.

Place of Performance:

Services will be performed on-site at FDC Philadelphia, 700 Arch Street, Philadelphia, Pennsylvania 19106.

General information regarding the Bureau of Prisons (BOP) and its facilities is located at www.bop.gov.

Method of Performance:

The Contractor shall provide all equipment, labor, and expertise required for the removal and disposal of solid waste from FDC Philadelphia. The following equipment and related services shall be provided by the Contractor.

Equipment: One totally enclosed, roll on/off 32 cubic yard compactor, with a lockable loadable hopper door.

Maximum height of 48”. The compactor power unit shall operate on 480 Volts, 3 Phase Power. Minimum hydraulic packing force of 40,000 lbs. Cycle time of approximately 30 seconds. This compactor shall be located inside the secure perimeter of the institution in the rear dock. The waste will consist of paper, packaging, food waste, cans, and items similar to residential waste.

Installation: The Contractor shall provide and install compaction equipment at its own expense at the required location in the rear loading dock. All equipment furnished shall have all required safety devices identified with a control number and installed to prevent seepage and accumulation of debris underneath.

Service: The Contractor shall ensure that all solid waste is disposed of in accordance with Federal, State, and local laws and regulations. All licenses, permits, and fees related to trash removal and disposal shall be the responsibility of the Contractor. The Government estimates that the contractor shall dispose of an estimated maximum 535 tons of solid waste per year.

All equipment, supplies, compactor, and controls, to include a spare power-unit, shall be supplied by the Contractor.

In the event the waste is frozen or stuck in the compactor, the Contractor is responsible for emptying the unit or providing an empty unit at no additional cost to the institution.

When spills occur as a result of equipment failure, the Contractor shall be responsible for all spills and related clean-up cost. The Contractor shall ensure compactor locations are clean prior to removing the container from the area.

The Contractor shall provide copies of all receipts related to the disposal of solid waste. The receipt must include the weight of the waste dumped. The receipts shall be addressed to the Facility Manager at FDC Philadelphia, PHL/Facilities~@bop.gov and shall be sent at least once per month, not later than the fifth working day of the month.

Maintenance: All required repairs to the supplied equipment shall be the responsibility of the Contractor. Response times for the repairs shall be Monday through Friday, 7:30 a.m. to 3:00 p.m., within four (4) hours of notification by the Facility Manager. Weekend and holiday response time will be six (6) hours.

Performance Schedule:

The Contractor shall pull and exchange the compactor an estimated two times per week. A schedule of days will be mutually agreed upon by the Contractor and Facilities Manager after contract award. The compactor will be removed from the institution no later than 5:00 a.m., emptied, cleaned, and returned to the institution no later than 6:30 a.m. in such a way as to ensure continuous availability to the institution. At no time shall FDC Philadelphia be without a compactor longer than the time necessary to remove full, empty, clean, and return empty detailed above.

Due to security requirements, the compactor shall be exchanged only during the hours above and will undergo special security procedures. The above schedule is subject to change based on the needs of the FDC Philadelphia.

Unless emergency situations dictate otherwise, a notice of 24 hours will be given if additional pulls are required.

Any additional pulls requested by FDC Philadelphia in excess of the estimated maximum identified in the Section 2, Schedule of Services, shall be invoiced at the applicable contract rate identified in the Schedule of Services.

If a scheduled pull falls on a federal holiday, the pull shall be accomplished by the Contractor on the following business day.

Should the compactor be unable to be pulled successfully due to security reasons arising from action of FDC Philadelphia staff, the contractor will be paid the applicable trip charge as identified in the Schedule of Services.

Title to Equipment:

Title of the compactor will remain with the Contractor. All equipment and components of the compactor are the sole property of the Contractor.

In the event of termination of this contract, the Contractor shall properly remove all of its property at its own expense. Upon the Contractor’s failure to do so, the Bureau of Prisons shall remove and store such property and charge the Contractor for any expenses incurred for such removal and storage.

Risk of Loss:

The Contractor assumes full risk of and responsibility for any loss, destruction or damage occurring to the trash removal equipment, components or containers, except such loss or damage as may be attributed to FDC Philadelphia by reason of negligence of its employees while acting within the scope of their employment.

Space Rental and Utilities:

The Contractor shall not be required to pay for the space occupied hereunder when in use on the premises of FDC Philadelphia. The Contractor shall not be required to pay the cost of any utilities for the operation of the compactor.

Institution Security:

The Contractor and its employees shall be required to meet and adhere to all regulations prescribed by the Bureau of Prisons. Security checks will be initiated each time the Contractor’s employees enter the secure perimeter of the institution. This requires approximately 20 minutes, but may take longer.

The Contractor’s employees must fill out the appropriate background investigation forms and clear the investigation before entering the institution. This will be done prior to the initial entry and once every 12 months at a minimum.

The Government reserves the rights for security reasons to prohibit certain vendor’s employees from entering the institution.

Section 3 – Contract Clauses

ADDENDUM TO FAR 52.212-4, Contract Terms and Conditions – Commercial Items (Jan 2017)

The terms and conditions for the following clauses are hereby incorporated into this solicitation and resulting contract as an addendum to FAR clause 52.212-4, Contract Terms and Conditions – Commercial Items.

52.252-2 CLAUSES INCORPORATED BY REFERENCE (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: www.acquistion.gov/far

Clause Title 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2013)

52.232-18 Availability of Funds (Apr 1984)

FAR 52.216-18, Ordering (Oct 1995)

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from the first day of the current performance period through the last day of the current performance period.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c) If mailed, a delivery order or task order is considered “issued” when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule.

(End of clause)

FAR 52.216-19 Order Limitations (Oct 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than unit as defined in the Schedule of Services, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor—

(1) Any order for a single item in excess of the estimated quantities in the Schedule of Items within the current performance period; or

(2) Any order for a combination of items in excess of the estimated quantities in the Schedule of Items within the current performance period; or

(3) A series of orders from the same ordering office within 30 days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 5 days after issuance, with written notice stating the Contractor’s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

FAR 52.216-21 Requirements (Oct 1995)

(a) This is a requirements contract for the supplies or services specified and effective for the period stated, in the Schedule. The quantities of supplies or services specified in the Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government’s requirements do not result in orders in the quantities described as “estimated” or “maximum” in the Schedule, that fact shall not constitute the basis for an equitable price adjustment.

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. Subject to any limitations in the Order Limitations clause or elsewhere in this contract, the Contractor shall furnish to the Government all supplies or services specified in the Schedule and called for by orders issued in accordance with the Ordering clause. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(c) Except as this contract otherwise provides, the Government shall order from the Contractor all the supplies or services specified in the Schedule that are required to be purchased by the Government activity or activities specified in the Schedule.

(d) The Government is not required to purchase from the Contractor requirements in excess of any limit on total orders under this contract.

(e) If the Government urgently requires delivery of any quantity of an item before the earliest date that delivery may be specified under this contract, and if the Contractor will not accept an order providing for the accelerated delivery, the Government may acquire the urgently required goods or services from another source.

(f) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order.