Amendment_0005.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

11 CONTRACT ID CODE rA~E OF PAGES

I 2

2. AMENDMENT/MODIFICATION NO. 3 EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. , 5. PROJECT NO (If applicable)

0005 02/23/2018 2C5E

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE I Federal Bureau of Prisons Southeast Regional Office 3800 Camp Creek Parkway, SW Building 2000 Atlanta, GA 30331

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION - NO.

15B21318B00000001

9B. DATED (SEE ITEM 11)

01 /04/2018

10A. MODIFICATION OF CONTRACT/ORDER NO.

D 10B DATED (SEE ITEM 13)

CODE !FACILITY CODE

11 . THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

~ The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers ~ is extended, D 1s not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended. by one of the following methods:

(a) By completing items 8 and 15. and returning 1 copies of the amendment (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE

PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment. and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

D D

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriahon date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

D

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor D is not, D is required to sign this document and return ____ _ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

See Page 2.

Except as provided herein, all tenns and conditions of the document referenced in Item 9A or 10A, as heretofore changed. remains unchanged and in full force and effect

15A. NAME AND TITLE OF SIGNER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

NSN 7540-01-152-8070

Previous edition unusable

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

(Signature of Contracting Officer)

~PROVED

/ 2-23-/ ~

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

NERO FACILITIES ADMINISTRATOR

15B21318B00000001 FCI Schuylkill – Install Above Ground Fuel Tanks Amendment 0005

SF-30 Block 14 Description of Amendment

Solicitation 15B21318B00000001 is hereby amended to add the following specification requirement:

SECTION 23 11 13 FACILITY FUEL-OIL PIPING

PART 2 PRODUCTS

2.01 PIPING AND FITTINGS

D. Rigid, Double-Containment Piping: Comply with UL 971:

1. RTRP: ASTM D 2996 or ASTM D 2997 carrier and containment piping and mechanical couplings to seal carrier and containment piping or individually bonded joints.

a. Minimum Operating-Pressure Rating for RTRP NPS 2 and NPS 3 (DN 50 and

DN 80): 150 psig (1035 kPa).

b. Minimum Operating-Pressure Rating for RTRP NPS 4 and NPS 6 (DN 100 and

DN 150): 125 psig (860 kPa). Compliance with UL 971 is not required for NPS 6 (DN 150) and larger piping.

c. Fittings: RTRF complying with ASTM D 2996 or ASTM D 2997 and made by RTRP manufacturer; watertight sump entry boots, termination, or other end fittings.

Also, the outdated wage determination is deleted and replaced it with the most current version (PA180087, Modification Number 2, dated 02/02/2018). The current version is attached.

Finally, the due date for receipt of bids is extended to Wednesday, March 7, 2018 at 1:00 PM Eastern.

All other terms and conditions remain unchanged. [End of Amendment 0005]

General Decision Number: PA180087 02/02/2018 PA87

Superseded General Decision Number: PA20170087

State: Pennsylvania

Construction Type: Building

County: Schuylkill County in Pennsylvania.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/05/2018 1 01/12/2018 2 02/02/2018

ASBE0023-008 06/26/2017

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR - MECHANICAL (Duct, Pipe & Mechanical System Insulation)......................$ 32.00 26.46

BOIL0154-007 01/01/2017

Rates Fringes

BOILERMAKER......................$ 40.90 27.27

BRPA0005-066 05/01/2014

Rates Fringes

BRICKLAYER (Including Pointing, Caulking, and Cleaning)........................$ 29.90 14.92

2/23/2018https://www.wdol.gov/wdol/scafiles/davisbacon/PA87.dvb?v=2

MASON - STONE....................$ 29.90 14.92

BRPA0005-069 05/01/2014

Rates Fringes

TERRAZZO FINISHER................$ 29.47 14.11

TERRAZZO WORKER/GRINDER..........$ 30.14 14.11

TERRAZZO WORKER/SETTER...........$ 28.67 17.11

BRPA0009-011 12/01/2017

Rates Fringes

TILE FINISHER....................$ 25.16 14.33

TILE SETTER......................$ 30.75 18.38

CARP0287-013 06/01/2017

Rates Fringes

CARPENTER (Includes Drywall Hanging, Metal Stud Installation, Form Work and Scaffold Building; Excludes Acoustical Ceiling Installation)....................$ 28.88 15.75

ELEC0743-016 09/01/2016

Rates Fringes

ELECTRICIAN (Alarm Installation, Installation of Sound and Communication Systems, and Low Voltage Wiring Only).....................$ 34.77 20.19

ELEV0084-005 01/01/2018

Rates Fringes

ELEVATOR MECHANIC................$ 47.48 32.645+A+B

FOOTNOTES:

A. VACATION CREDIT: Employer contributes 8% basic hourly rate for 5 years or more of service as vacation pay credit, and 6% for 6 months to 5 years of service.

B. Eight Paid Holidays (provided employee has worked 5 consecutive days before and the working day after the holiday): New Years's Day; Memorial Day; Independence Day;

Labor Day; Veteran's Day; Thanksgiving Day and the Friday after Thanksgiving Day, and Christmas Day.

ENGI0066-022 06/01/2014

Rates Fringes

POWER EQUIPMENT OPERATOR

Paver (Asphalt, Aggregate and Concrete)...............$ 32.59 18.10

ENGI0542-029 05/01/2017

Rates Fringes

POWER EQUIPMENT OPERATOR

Bulldozer, Loader, Forklift (20 ft. and over, excludes Masonry Work)......$ 34.96 23.49 Crane.......................$ 35.24 23.57 Forklift (under 20 ft., excludes Masonry Work)......$ 32.23 22.68

IRON0404-012 07/01/2017

Rates Fringes

IRONWORKER, REINFORCING..........$ 32.32 28.38

IRON0420-011 07/01/2014

Rates Fringes

IRONWORKER, STRUCTURAL

Projects over $25 million...$ 31.70 25.00 Projects under $25 million..$ 30.70 25.00

LABO1174-010 05/01/2017

Rates Fringes

LABORER

Forklift (Masonry Work only).......................$ 25.29 15.04 Mason Tender-Brick..........$ 23.29 15.04 Vibrating Plate.............$ 21.57 15.04

PAIN0041-004 05/01/2014

Rates Fringes

PAINTER (Brush, Roller, and Spray)...........................$ 27.95 16.12

PLUM0524-010 06/01/2017

Rates Fringes

PIPEFITTER (Includes HVAC Pipe Installation)...............$ 41.24 20.27 PLUMBER (Excludes HVAC Unit Installation)....................$ 41.24 20.27

SHEE0019-015 12/01/2016

Rates Fringes

SHEET METAL WORKER (Includes HVAC Duct Installation)..........$ 33.53 33.38

FOOTNOTE: Paid Holiday: Election Day

* UAVG-PA-0004 01/01/2016

Rates Fringes

OPERATOR: Mechanic..............$ 30.48 16.88

* UAVG-PA-0005 01/01/2018

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 29.80 27.44

* UAVG-PA-0014 01/01/2016

Rates Fringes

OPERATOR: Oiler.................$ 27.95 20.59

* UAVG-PA-0015 01/01/2018

Rates Fringes

MILLWRIGHT.......................$ 37.70 23.95

SUPA2011-021 08/20/2014

Rates Fringes

CARPENTER (Acoustical Ceiling Installation Only)...............$ 25.71 12.02

CEMENT MASON/CONCRETE FINISHER...$ 19.07 8.54

ELECTRICIAN (HVAC/Temperature Controls Installation Only)......$ 25.44 12.35

ELECTRICIAN, Excludes Alarm Installation, Sound and Communication Installation, HVAC/Temperature Control Installation, and Low Voltage Wiring...........................$ 30.42 15.68

LABORER: Common or General, Including Cement Mason Tending...$ 16.29 4.71

OPERATOR:

Backhoe/Excavator/Trackhoe.......$ 29.13 16.81

OPERATOR: Bobcat/Skid Steer/Skid Loader................$ 26.96 13.93

PLUMBER (HVAC Unit Installation)....................$ 24.31 3.95

ROOFER...........................$ 41.37 13.28

TRUCK DRIVER: Dump Truck........$ 24.98 11.88

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION