15B20922Q00000014 CARPENTRY VT MACHINERY.pdf

15B20922Q00000014 Page 1 of 54

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24 & 30

1. REQUISITION NUMBER PAGE 1 OF

5. SOLICITATION NUMBER

15B20922Q00000014

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 6. SOLICITATION ISSUE DATE

09/02/2022 04:00 PM EST

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

C. SUDBROOK CSUDBROOK@BOP.GOV

b. TELEPHONE NUMBER (No collect calls) 8. OFFER DUE DATE / LOCAL

TIME

09/09/2022 02:00 PM EST

CODE 15B209

Federal Bureau of Prisons FCI McKean

6975 ROUTE 59

Lewis Run, PA 16738

9. ISSUED BY UNRESTRICTED OR X SET ASIDE:100.00 % FOR

X SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS: 444130

SIZE STANDARD:

10. THE ACQUISITION IS

SEE

SCHEDULE

11. DELIVERY FOR FOB DESTINATION

UNLESS BLOCK IS MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER DPAS

(15 CFR 700)

13b. RATING

X RFQ IFB RFP

14. METHOD OF SOLICITATION

15B209CODE15. DELIVER TO

Federal Bureau of Prisons FCI McKean

6975 ROUTE 59

Lewis Run, PA 16738

CODE 15B20916. ADMINISTERED BY

Federal Bureau of Prisons FCI McKean

6975 ROUTE 59

Lewis Run, PA 16738

FACILITY

CODE

CODE

TELEPHONE NO.

17a. CONTRACTOR/

OFFEROR

15B209CODE18a. PAYMENT WILL BE MADE BY

Federal Bureau of Prisons FCI McKean

6975 ROUTE 59

Lewis Run, PA 16738

MCK-BUSINESSOFFICE-S@BOP.GOV

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER SEE ADDENDUM

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS

CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

FCI MCKEAN-15B20922Q00000014

CARPENTRY VT MACHINERY

SINGLE AWARD PER LOT TOTAL-MEETS OR

EXCEEDS SPECS.

Firm Fixed Price

See Continuation Sheet(s) (Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

X 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE X ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN ____ COPIES TO

ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE

TERMS AND CONDITIONS SPECIFIED.

29. AWARD OF CONTRACT: REF. _____________________________ OFFER

DATED _________________ . YOUR OFFER ON SOLICITATION (BLOCK 5)

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN,

IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF THE CONTRACTING OFFICER (TYPE OR PRINT)

Adam King

31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

15B20922Q00000014 Page 2 of 54

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: _________________________________

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

PARTIAL FINAL

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

COMPLETE PARTIAL FINAL

36. PAYMENT 37. CHECK NUMBER

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

15B20922Q00000014 Page 3 of 54

Table of Contents

Section Description Page Number

1 Solicitation/Contract Form 2 Commodity or Services Schedule 3 Contract Clauses

52.246-1 Contractor Inspection Requirements (Apr 1984) 52.246-11 Higher-Level Contract Quality Requirement (Dec 2014) 52.213-3 Notice to Supplier (Apr 1984) 2852.222-70 Domestic Violence, Sexual Assault, and Stalking (DEC 2014) 2852.223-70 Unsafe Conditions Due to the Presence of Hazardous Material (June 1996) DJAR-PGD-02-02A Non-U.S. Citizens Prohibited from Access to DOJ Information Technology (IT) Systems DJAR-PGD-02-02B Non-U.S. Citizens Prohibited from Access to DOJ Information Technology (IT) Systems DJAR-PGD-05-08 Implementation of Homeland Security Presidential Directive (HSPD) 12 - Policy for a Common Identification Standard for Federal Employees and Contractor DJAR-PGD-06-09 Reprogramming of Funds Notices to Congress for A-76 Competitions DJAR-PGD-07-10 Ensuring New Acquisitions Include Common Security Configurations DJAR-PGD-07-12 Maintaining Contractor Performance During a Pandemic or Other Emergency DJAR-PGD-08-04 Security of Systems and Data, Including Personally Identifiable Information DJAR-PGD-08-05 Contractor Certification of Compliance with Federal Tax Requirements DOJ-05 Security of Department Information and Systems (APR 2015) DOJ-07 Prohibition On Access By Non-U.S. Citizens To DOJ IT Systems (MAR 2002) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) 52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014) 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) 52.210-1 Market Research (Nov 2021) 52.219-6 Notice of Total Small Business Set-Aside (Nov 2020) 52.222-1 Notice to the Government of Labor Disputes (Feb 1997) 52.222-21 Prohibition of Segregated Facilities (Apr 2015) 52.222-26 Equal Opportunity (Sept 2016) 52.222-26 Alt I Equal Opportunity (Sept 2016) - Alternate I (Feb 1999) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) 52.225-13 Restrictions on Certain Foreign Purchases (Feb 2021) 52.227-13 Patent Rights-Ownership by the Government (Dec 2007) 52.232-25 Prompt Payment (Jan 2017) 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.233-1 Disputes (May 2014) 52.233-1 Alt I Disputes (May 2014) - Alternate I (Dec 1991) 52.233-3 Protest after Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) 52.244-6 Subcontracts for Commercial Products and Commercial Services (Jan 2022) 52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short Form) (Apr 1984) 52.249-8 Default (Fixed-Price Supply and Service) (Apr 1984) 52.253-1 Computer Generated Forms (Jan 1991) 52.204-18 Commercial and Government Entity Code Maintenance (Aug 2020) 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) 52.223-99 DEV Ensuring Adequate COVID-19 Safety Protocols for Federal Contractors (Oct 2021)

(DEVIATION)

52.246-26 Reporting Nonconforming Items (Nov 2021)

15B20922Q00000014 Page 4 of 54

52.252-4 Alterations in Contract (Apr 1984) 52.252-6 Authorized Deviations in Clauses (Nov 2020) 2852.212-4 Contract Terms and Conditions, Commercial Items (FAR Deviation) (NOV 2020) DOJ-02 Contractor Privacy Requirements (JAN 2022) DOJ-03 Personnel Security Requirements For Contractor Employees (Nov 2021) DOJ-03 Alt I Personnel Security Requirements For Contractor Employees (Nov 2021); (Alt. I) -- Classified Information -- Cleared Contractors DOJ-08 Continuing Contract Performance During a Pandemic Influenza or other National Emergency

(OCT 2007)

OBD-01 Electronic Signatures (MAY 2019)

4 List of Attachments 5 Solicitation Provisions

52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation (Dec 2016) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Nov 2021) 52.204-8 Annual Representations and Certifications (May 2022) 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) 52.209-7 Information Regarding Responsibility Matters (Oct 2018) 52.204-7 System for Award Management (Oct 2018) 52.204-22 Alternative Line Item Proposal (Jan 2017) 52.215-5 Facsimile Proposals (Oct 1997) 52.204-16 Commercial and Government Entity Code Reporting (Aug 2020) 52.252-3 Alterations in Solicitation (Apr 1984) 52.252-5 Authorized Deviations in Provisions (Nov 2020) 2852.203-70 General Non-Disclosure Agreement (AUG 2016) 2852.203-71 Intelligence Related Non-Disclosure Agreement (AUG 2016) 2852.233-70 Protests Filed Directly with the Department of Justice (NOV 2020) DOJ-06 National Security Risk Assessment (APR 2014)

15B20922Q00000014 Page 5 of 54

Section 2 - Commodity or Services Schedule

SCHEDULE OF SUPPLIES/SERVICES

CONTINUATION SHEET

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

16" JOINTER 5HP, 1PH - HELICAL CUTTERHEAD

· 5 HP, 220V, single-phase, 25A

· Bevel jointing - 0–45°

· Footprint to not exceed - 24" x 60"

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

24" Platen Type Belt Sander 10HP, 3PH

· 10 HP, 220V, 3-phase, 25A

· Conveyor motor, 1 HP, 3.4A

· Max. board thickness - 6"

· Sanding belt size: 25" W x 75" L

· Footprint to not exceed - 40" x 20

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

25" PLANER - HELICAL CUTTERHEAD

· 15 HP, 440V, 3-phase, 18.5A

· Maximum stock thickness - 9"

· Minimum stock length - 10

PSC: 3230

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

MORTISER AND STAND

· 1-1/2 HP, 110V, single-phase, 14A

· Table longitudinal travel

· Table cross travel

· Column tilt

· Fence angle, 0-30°

· Collar size, 5/8" and 3/4"

· Footprint to not exceed - 24" x 18

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

9" x 138-1/2" OSCILLATING EDGE SANDER 3HP, 3PH

· 3 HP, 220V, 3-phase, 9.5A

· Platen - graphite coated, 47-1/2" x 9-1/2"

· Main table tilt, 0–45°

· Footprint to not exceed - 42" x 26"

1 EA $________ $_________________

15B20922Q00000014 Page 6 of 54

PSC: 3210

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

14" BANDSAW

· 1 HP, 110V, single-phase, 11A

· Table tilt - 15° left, 45° right

· Blade min. and max Thickness - 1/8" - 3/4" wide

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

6" JOINTER HELICAL CUTTERHEAD

· 1 HP, 110V, single-phase, 14A

· Footprint to not exceed - 16" x 18"

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

6" x 48" Belt, 12" Disc Combo Sander

· 1-1/2 HP, 110V, single-phase, 10.5A

· Sanding belt tilt - 0–90°

· Sanding disc diameter - 12"

· Sanding disc type - PSA

· Sanding disc table tilt - 0°–45°

· Footprint to not exceed - 16" x 18

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

1 HP OSCILLATING SPINDLE SANDER

· 1 HP, 120V, single-phase, 12A/6A

· Spindle diameters: 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2", 2", 3", 4"

· Spindle length: 5", 6", 9"

· Table tilt: 45°F, 15°B

· Footprint to not exceed - 25" x 30"

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SCROLL SAW EQUIPPED WITH A STAND AND LIGHT

· Amps - 1.3A

· Depth of cut: 2"

· Cutting capacities: 2" @ 90 deg., 1-3/16" @ 45 deg.

· Table tilt: 45 deg. left and right

PSC: 3210

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

15" DRILL PRESS

· 2 HP, 220V, single-phase, 8.6A

15B20922Q00000014 Page 7 of 54

· Table swing - 360°

· Table tilt - 60° left and right

· Table T-slots

· Footprint to not exceed - 26" x 18

PSC: 3210

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SHAPER 7 1/2HP 3PH

· 7-1/2 HP, 220V, 3-phase, 20A

· Spindle diameters: 3/4", 1", 1-1/4"

· Spindle lengths: 6"–7"

· Footprint to not exceed - 26" x 28

PSC: 3230

1 EA $________ $_________________

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

16-1/2" Dovetail Machine

· 1 HP, 220V single-phase, 5A

· Dovetail shank: 1/2"

· Footprint to not exceed - 40” x 28"

PSC: 3210

15B20922Q00000014 Page 8 of 54

Section 3 - Contract Clauses

2852.212-4 Contract Terms and Conditions, Commercial Items (FAR Deviation) (NOV 2020)

When a commercial item is contemplated (using FAR part 12 procedures or otherwise) and the contract will include FAR 52.212-4, the following replaces subparagraph (g)(2); paragraph (h); subparagraph (i)(2); paragraph (s); and paragraph (u), Unauthorized Obligations, of the basic FAR clause, and adds paragraph (w), as follows:

(g)(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment act regulations at 5 CFR part 1315, as modified by subparagraph (i)(2), Prompt payment, of this clause.

(h) Patent indemnity. Contractor shall indemnify and hold harmless the Government and its respective affiliates, officers, directors, employees, agents, successors and assigns (collectively, “Indemnities”) from and against any and all liability and losses incurred by the Indemnities that are (i) included in any settlement and/or (ii) awarded by a court of competent jurisdiction arising from or in connection with any third party claim of infringement made against Indemnities asserting that any product or service supplied under this contract constitutes infringement of any patent, copyright, trademark, service mark, trade name or other proprietary or intellectual right. This indemnity shall not apply unless Contractor shall have been informed within a reasonable time by the Government of the claim or action alleging such infringement and shall have been given such opportunity as is afforded by applicable laws, rules, or regulations to participate in its defense. This indemnity also shall not apply to any claim unreasonably settled by the Government which obligates Contractor to make any admission or pay any amount without written consent signed by an authorized officer of Contractor, unless required by final decree of a court of competent jurisdiction.

(i)(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations (5 CFR part 1315), with the following modification regarding the due date: For the sole purpose of computing an interest penalty due the Contractor, the Government agrees to inspect and determine the acceptability of any supply delivered or service performed specified in the invoice within thirty (30) days of receipt of a proper invoice from the Contractor, after which time, if no affirmative action has been taken by the Government to accept such supply or service, the supply or service will be deemed accepted and payment due thirty (30) days from the date of deemed acceptance. If the Government makes the determination that the item delivered or service performed is deficient or otherwise unacceptable, or the invoice is otherwise determined not to be a proper invoice, the terms and conditions of this paragraph regarding prompt payment will apply to the date the Contractor corrects the deficiency in the item delivered or service performed or submits a proper invoice. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance.

The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments, Payments, Invoice, Other Compliances, and Compliance with Laws Unique to Government Contracts provisions of the basic FAR clause at 52.212-4, and the Unauthorized Obligations and Contractor's Commercial Supplier Agreements— Unenforceable Clauses provisions of JAR 2852.212-4.

(3) FAR 52.212-5.

(4) Other paragraphs of the basic FAR clause at 52.212-4, with the exception of paragraph (o), Warranty, and those paragraphs identified in this deviation of 52.212-4.

(5) Addenda to this solicitation, contract, or order, including contractor's Commercial supplier agreements incorporated into the contract.

(6) Solicitation provisions if this is a solicitation.

(7) Paragraph (o), Warranty, of the basic FAR clause at 52.212-4.

(8) The Standard Form 1449.

(9) Other documents, exhibits, and attachments.

(10) The specification.

(u) Unauthorized obligations.

(1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract or order is subject to any Commercial supplier agreement that includes any language, provision, or clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (see 31 U.S.C. 1341), the following shall govern:

(i) Any such language, provision, or clause is unenforceable against the Government.

15B20922Q00000014 Page 9 of 54

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the commercial supplier agreement. If the commercial supplier agreement is invoked through an “I agree” click box or other similar mechanism ( e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such language, provision, or clause is deemed to be stricken from the commercial supplier agreement and have no effect.

(2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(w) Commercial supplier agreements—unenforceable clauses. When any supply or service acquired under this contract or order is subject to a contractor's commercial supplier agreement, the following shall be deemed incorporated into such agreement and modifies and replaces any similar language, provision, or clause in such agreement. As used herein, “this agreement” means any contractor commercial supplier agreement:

(1) Notwithstanding any other provision of this agreement, when the end user is an agency or instrumentality of the U.S. Government, the following shall apply:

(i) Applicability. This agreement is a part of a contract between commercial supplier and the U.S. Government for the acquisition of the supply or service that necessitates a license or other similar legal instrument (including all contracts, task orders, and delivery orders under FAR part 12).

(ii) End user. This agreement shall bind the Government as end user but shall not operate to bind the Government employee or person acting on behalf of the Government in his or her personal capacity.

(iii) Law and disputes. This agreement is governed by Federal law.

(A) Any language, provision, or clause purporting to subject the U.S. Government to the laws of any U.S. state, territory, district, or municipality, or the laws of a foreign nation, except where Federal law expressly provides for the application of such laws, is hereby deleted and shall have no effect.

(B) Any language, provision, or clause requiring dispute resolution in a specific forum or venue that is different from that prescribed by applicable Federal law is hereby deleted and shall have no effect.

(C) Any language, provision, or clause prescribing a different time period for bringing an action than that prescribed by applicable Federal law in relation to a dispute is hereby deleted and shall have no effect.

(iv) Continued performance. Notwithstanding any other provision in this agreement, if the Contractor believes the Government to be in breach of this contract, order, or agreement, it shall pursue its rights under the Contract Disputes Act or other applicable Federal statute while continuing performance as set forth in subparagraph (d), Disputes, of FAR 52.212-4.

(v) Arbitration; equitable or injunctive relief. In the event of a claim or dispute arising under or relating to the contract, order, or this agreement, (A) binding arbitration shall not be used unless otherwise specifically authorized by agency guidance, and (B) equitable or injunctive relief, including the award of attorney fees, costs or interest, may be awarded against the Government only when explicitly provided by statute.

(vi) Updating terms.

(A) After award, the contractor may unilaterally revise terms if they are not material. Material terms are defined as:

(1) Terms that change Government rights or obligations;

(2) Terms that increase Government prices;

(3) Terms that decrease the overall level of service; or

(4) Terms that limit any other Government right addressed elsewhere in this contract.

(B) For revisions that materially change the terms of the contract, the revised commercial supplier agreement must be incorporated into the contract using a bilateral modification.

(C) Any agreement terms or conditions unilaterally revised subsequent to award that are inconsistent with any material term or provisions of this contract shall not be enforceable against the Government, and the Government shall not be deemed to have consented to them.

(vii) Order of precedence. Any Order of Precedence clause in any commercial supplier agreement is not enforceable against the Government. The applicable Order of Precedence for this contract, order, or agreement is FAR 52.212-4(s), as revised by JAR

2812.302 and 2852.212-4(s).

(viii) No automatic renewals. If any license or service tied to period payment is provided under this agreement (e.g., annual software maintenance or annual lease term), such license or service shall not renew automatically upon expiration of its current term without prior express consent by a properly warranted contracting officer, and any provision or term of any license or service purporting to provide for automatic renewal is unenforceable against the Government.

(ix) Indemnification by the Government or end-user. Any language, provision, or clause of this commercial supplier agreement requiring the Government or End-user to indemnify the commercial supplier or licensor is not enforceable against the Government.

(x) Indemnification by the commercial supplier or licensor. Any clause of this agreement requiring or permitting the commercial supplier or licensor to defend the Government as a condition of indemnifying the Government for any claim of infringement is hereby amended to provide that the U.S. Department of Justice has the sole right to represent the United States in any such action, in accordance with 28 U.S.C. 516.

(xi) Audits. Any language, provision, or clause of this commercial supplier agreement permitting Contractor to audit the end user's compliance with this agreement is not enforceable against the Government. To the extent any language, provision or clause of

15B20922Q00000014 Page 10 of 54 this agreement permits Contractor to audit the Government's compliance under this contract, order, or agreement, such language, provision, or clause of this agreement is hereby stricken and replaced as follows:

“(A) If Contractor reasonably believes that the Government has violated the terms of this agreement with regard to the restrictions on authorized use and/or the number of authorized users, upon written request from Contractor, including an explanation of the basis for the request, DOJ will provide a redacted version of the Government's most recent Security Assessment and Authorization package (SAA) to Contractor on a confidential basis, so that Contractor may reasonably verify the Government's compliance with its obligations under this agreement. Contractor understands and agrees that the Government will remove or redact any information from the SAA that it reasonably believes may compromise (a) the security of the Government's information technology environment;

(b) the confidentiality of any third-party proprietary or confidential information; (c) any confidential, sensitive law enforcement information; and (d) any other information that the Government believes may compromise a past, current, or prospective investigation, prosecution, or litigation. Notwithstanding the preceding, and subject to the Government's policies and procedures for such review, including but not limited to complying with all Government security requirements prior to being granted access to the Government's facilities, including the execution of appropriate confidentiality and/or non-disclosure agreements, the Government will arrange, upon Contractor's written request, for Contractor to view an un-redacted version of the SAA on Government premises. Contractor understands that Contractor will be provided a copy of the un-redacted SAA on Government premises only and that no un-redacted copy of the SAA, or any medium containing information relating to it, will be permitted to be removed from Government premises.

(B) The Contractor also understands and agrees that the Contractor shall make a request under this paragraph no more than on an annual basis and only during the period of the contract, and that any activities performed by Contractor under this clause will be performed at Contractor's expense, without reimbursement by the Government.

(C) Discrepancies found with regard to the restrictions on authorized use and/or the number of authorized users may result in a charge by Contractor to the Government. Any resulting invoice must comply with the proper invoicing and payment requirements specified in the contract. This charge, if disputed by the Government, will be resolved through the Disputes clause at 52.212-4(d); no payment obligation shall arise on the part of the Government until the conclusion of the dispute process.”

(xii) Taxes or surcharges. Any taxes or surcharges which the Contractor seeks to pass along to the Government as end user will be governed by the terms of the underlying Government contract and, in any event, must be submitted to the Contracting Officer for a determination of applicability prior to invoicing unless specifically agreed to otherwise in the Government contract.

(xiii) Non-assignment. This agreement may not be assigned, nor may any rights or obligations thereunder be delegated, without the Government's prior approval, except as expressly permitted under FAR 52.212-4 (b), Assignment.

(xiv) Confidential information.

(A) During the term of this contract or order, either party may identify information as “confidential information,” and there shall be no disclosure, dissemination, or publication of any such information except to the extent required for the performance of this contract or order and otherwise provided in this clause or by statute or regulation. Specifically, the parties agree that the party receiving confidential information may only disclose such information to its employees and contractors on a “need-to-know” basis to carry out the obligations of this contract or order, and that subcontractors performing under this Agreement are subject to the same stipulations provided in this provision. The parties also agree that this provision shall survive the termination of this contract or order, and any confidential information obtained or received which comes within these restrictions shall remain confidential, provided that the obligation to treat information as confidential shall not apply to information which is or becomes publicly available through no improper action of the receiving party; is or comes to be in the receiving party's possession independent of its relationship with the disclosing party; is developed by or becomes known to the receiving party without use of any confidential information of the disclosing party; or is obtained rightfully from a third party not bound by an obligation of confidentiality. Additionally, nothing in this contract or order shall restrict disclosure by the receiving party pursuant to any applicable law, including but not limited to the Freedom of Information Act, 5 U.S.C. 552, et seq., or an order of any court of competent jurisdiction, provided that in either such case the receiving party gives prompt notice to the disclosing party to allow the disclosing party to interpose an objection to such disclosure, take action to assure confidential handling of the confidential information, or take such other action as it deems appropriate to protect its confidential information.

(B) The Government considers and hereby identifies as confidential any and all information related to any inquiries and/or searches performed by the Government or by contractor at the Government's direction under this contract or order, including the subject of any such inquiry or search and any and all search terms, regardless of whether provided in writing or orally to Contractor, and Contractor agrees that it may only disclose such information to its employees and contractors on a “need-to-know” basis to carry out the obligations of this contract or order and that it will not share, reveal, divulge, disclose, disseminate, or publicize any such information to any third party except as provided in this provision without the prior written approval of the Contracting Officer. Contractor also understands and agrees that any subcontractors performing under this contract or order are subject to the same stipulations and that Contractor may be held responsible for any violations of confidentiality by a subcontractor.

(C) These provisions are consistent with and do not supersede, conflict with, or otherwise alter an employee's obligations, rights, or liabilities created by existing statute or Executive order relating to (1) classified information, (2) communications to Congress,

(3) the reporting to an Inspector General of a violation of any law, rule, or regulation, or mismanagement, a gross waste of funds, an abuse of authority, or a substantial and specific danger to public health or safety, or (4) any other whistleblower protection. The definitions, requirements, obligations, rights, sanctions, and liabilities created by Executive orders and statutory provisions relating to whistleblower protection are incorporated into this contract and are controlling.

15B20922Q00000014 Page 11 of 54

(D) The Government may share the terms, conditions and prices set forth in this Order with, and provide a copy of the Order to, other Executive branch agencies of the U.S. Government, provided that the Government shall ensure that other Executive branch agencies to which it provides such information will be required to treat all such information consistent with terms and conditions set forth in this Order.

(E) Notwithstanding anything in this agreement, the Government may retain any confidential information as required by law, regulation, or its internal document retention procedures for legal, regulatory, or compliance purposes; provided, however, that all such retained confidential information will continue to be subject to the confidentiality obligations of this Order.

(xv) Authorized users. Authorized users may include full and part-time employees of the Government, including those working at or from remote locations, and contractors and contractor employees working within the scope of their contract with the Government, including those at or from remote locations.

(xvi) Authorized use. Authorized users are authorized to use the product or service acquired under this contract in performing business on behalf of the Government. Any information obtained or acquired by the Government under this contract may be used by the Government in the performance of Government business.

(2) If any language, provision, or clause of this agreement conflicts or is inconsistent with the preceding paragraph (w)(1), the language, provisions, or clause of paragraph (w)(1) shall prevails to the extent of such inconsistency.

A.1 ADDENDUM TO FAR 52.212-4, Contract Terms and Conditions, Commercial Items (FAR Deviation) (NOV 2020)

The terms and conditions for the following clauses are hereby incorporated into this solicitation and resulting contract as an addendum to FAR clause 52.212-4.

Clauses By Reference

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): www.acquisition.gov

Clause Title Fill-ins (if applicable)

52.246-1 Contractor Inspection Requirements (Apr 1984)

52.246-11 Higher-Level Contract Quality Requirement (Dec 2014)

52.213-3 Notice to Supplier (Apr 1984)

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or

Statements (Jan 2017)

52.204-13 System for Award Management Maintenance (Oct 2018)

52.204-19 Incorporation by Reference of Representations and Certifications (Dec

2014)

52.204-23 Prohibition on Contracting for Hardware, Software, and Services

Developed or Provided by Kaspersky Lab and Other Covered Entities

(Nov 2021)

15B20922Q00000014 Page 12 of 54

Clause Title Fill-ins (if applicable)

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video

Surveillance Services or Equipment (Nov 2021)

52.210-1 Market Research (Nov 2021)

52.219-6 Notice of Total Small Business Set-Aside (Nov 2020)

52.222-1 Notice to the Government of Labor Disputes (Feb 1997)

52.222-21 Prohibition of Segregated Facilities (Apr 2015)

52.222-26 Equal Opportunity (Sept 2016)

52.222-26 Alt I Equal Opportunity (Sept 2016) - Alternate I (Feb 1999) Waived Terms: "[Contracting

Officer shall list terms]"

52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving

(Jun 2020)

52.225-13 Restrictions on Certain Foreign Purchases (Feb 2021)

52.227-13 Patent Rights-Ownership by the Government (Dec 2007)

52.232-25 Prompt Payment (Jan 2017)

52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013)

52.233-1 Disputes (May 2014)

52.233-1 Alt I Disputes (May 2014) - Alternate I (Dec 1991)

52.233-3 Protest after Award (Aug 1996)

52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004)

52.244-6 Subcontracts for Commercial Products and Commercial Services (Jan

2022)

52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short

Form) (Apr 1984)

52.249-8 Default (Fixed-Price Supply and Service) (Apr 1984)

52.253-1 Computer Generated Forms (Jan 1991)

Clauses By Full Text

2852.222-70 Domestic Violence, Sexual Assault, and Stalking (DEC 2014)

(a) It is DOJ policy to enhance workplace awareness of and safety for victims of domestic violence, sexual assault, and stalking. This policy is summarized in “DOJ Policy Statement 1200.02, Federal Workforce Responses to Domestic Violence, Sexual Assault, and Stalking,” available in full for public viewing at: http://www.justice.gov/sites/default/files/ovw/legacy/2013/12/19/federal-workplacee-responses-to-domesticeviolence-sexualassault-stalking.pdf.

15B20922Q00000014 Page 13 of 54

Vendor agrees, upon contract award, to provide notice of this Policy Statement, including at a minimum the above-listed URL, to all Vendor employees and employees of subcontractors who will be assigned to work on DOJ premises.

(b) Upon contract award, DOJ will provide the Contractor with the name and contact information of the point of contact for victims of domestic violence, sexual assault, and stalking for the component or components where the Contractor will be performing. The Contractor agrees to inform its employees and employees of subcontractors, who will be assigned to work on DOJ premises, with the name and contact information of the point of contact for victims of domestic violence, sexual assault, and stalking.

(End of Clause)

2852.223-70 Unsafe Conditions Due to the Presence of Hazardous Material (June 1996)

(a) "Unsafe condition" as used in this clause means the actual or potential exposure of contractor or Government employees to a hazardous material as defined in Federal Standard No. 313, and any revisions thereto during the term of this contract, or any other material or working condition designated by the Contracting Officer's Technical Representative (COTR) as potentially hazardous and requiring safety controls.

(b) The Occupational Safety and Health Administration (OSHA) is responsible for issuing and administering regulations that require contractors to apprise its employees of all hazards to which they may be exposed in the course of their employment; proper conditions and precautions for safe use and exposure; and related symptoms and emergency treatment in the event of exposure.

(c) Prior to commencement of work, contractors are required to inspect for and report to the contracting officer or designee the presence of, or suspected presence of, any unsafe condition including asbestos or other hazardous materials or working conditions in areas in which they will be working.

(d) If during the performance of the work under this contract, the contractor or any of its employees, or subcontractor employees, discovers the existence of an unsafe condition, the contractor shall immediately notify the contracting officer, or designee, (with written notice provided not later than three (3) working days thereafter) of the existence of an unsafe condition. Such notice shall include the contractor's recommendations for the protection and the safety of Government, contractor and subcontractor personnel and property that may be exposed to the unsafe condition.

(e) When the Government receives notice of an unsafe condition from the contractor, the parties will agree on a course of action to mitigate the effects of that condition and, if necessary, the contract will be amended. Failure to agree on a course of action will constitute a dispute under the Disputes clause of this contract.

(f) Nothing contained in this clause shall relieve the contractor or subcontractors from complying with applicable Federal, State, and local laws, codes, ordinances and regulations (including the obtaining of licenses and permits) in connection with hazardous material including but not limited to the use, disturbance, or disposal of such material.

(End of Clause)

DJAR-PGD-02-02A Non-U.S. Citizens Prohibited from Access to DOJ Information Technology (IT) Systems

The Department of Justice does not permit the use of Non-U.S. citizens in the performance of this contract or commitment for any position that involves access to or development of any DOJ IT system. By signing the contract or commitment document, the contractor agrees to this restriction. [In those instances where other non-IT requirements contained in the contract or commitment can be met by using Non-U.S. citizens, those requirements shall be clearly described.].

(End of Clause)

DJAR-PGD-02-02B Non-U.S. Citizens Prohibited from Access to DOJ Information Technology (IT) Systems

The Department of Justice (DOJ) will no longer permit the use of Non-U.S. citizens in the performance of this contract or commitment for any position that involves access to or development of any DOJ IT system. By signing the contract or commitment document, the contractor agrees to this restriction with respect to all new employees utilized directly to perform duties on the contract.

Non-U.S. citizens currently employees under this contract or commitment may continue performance unless otherwise directed by the Department of Justice. No new, replacement, or additional Non-U.S. citizens may be added to the contract without the express approval of the Department of Justice. [In those instances where other non-IT requirements contained in the contract or commitment can be met by using Non-U.S. citizens, those requirements shall be clearly described.].

(End of Clause)

DJAR-PGD-05-08 Implementation of Homeland Security Presidential Directive (HSPD) 12 - Policy for a Common Identification Standard for Federal Employees and Contractor

NOTICE OF CONTRACTOR PERSONNEL SECURITY REQUIREMENTS

Compliance with Homeland Security Presidential Directive-12 (HSPD-12) and Federal Information Processing Standard Publication 201 (FIPS 201)' entitled "Personal Identification Verification (PIV) for Federal Employees and Contractors," Phase I.

1. Long-Term Contractor Personnel:

15B20922Q00000014 Page 14 of 54

In order to be compliant with HSPD-12/PIV I, the following investigative requirements must be met for each new long-term2 contractor employee whose background investigation (BI) process begins on or after October 27, 2005:

a. Contractor Personnel must present two forms of identification in original form prior to badge issuance (acceptable documents are listed in Form 1-9, OMB No. 1615-0047, " Employment Eligibility Verification," and at least one document must be a valid State or Federal government-issued picture ID);

b. Contractor Personnel must appear in person at least once before a DOJ official who is responsible for checking the identification documents. This identity proofing must be completed sometime during the clearance process but prior to badge issuance and must be documented by the DOJ official;

c. Contractor Personnel must undergo a BI commensurate with the designated risk level associated with the duties of each position.

Outlined below are the minimum BI requirements for each risk level:

•High Risk - Background Investigation (5 year scope) •Moderate Risk - Limited Background Investigation (LBI) or Minimum Background Investigation (MBI) •Low Risk - National Agency Check with Inquiries (NACI) investigation

d. The pre-appointment BI waiver requirements for all position sensitivity levels are a:

1) Favorable review of the security questionnaire form;

2) Favorable fingerprint results;

3) Favorable credit report, if required;3

4) Waiver request memorandum, including both the Office of Personnel Management schedule date and position sensitivity/risk level; and 5) Favorable review of the National Agency Check (NAC)4 portion of the applicable BI that is determined by position sensitivity/risk level.

A badge may be issued following approval of the above waiver requirements.

If the NAC is not received within five days of OPM' s scheduling date, the badge can be issued based on a favorable review of the Security Questionnaire and the Federal Bureau of Investigation Criminal History Check (i.e., fingerprint check results).

e. Badge re-validation will occur once the investigation is completed and favorably adjudicated. If the BI results so justify, badges issued under these procedures will be suspended or revoked.

2. Short-Term Contractor Personnel:

It is the policy of the DOJ that short-term contractors having access to DOJ information systems and/or DOJ facilities or space for six months or fewer are subject to the identity proofing requirements listed in items la. and lb. above. The pre-appointment waiver requirements for short-term contractors are:

a.Favorable review of the security questionnaire form;

b.Favorable fingerprint results;

c.Favorable credit report, if required;5 and d.Waiver request memorandum indicating both the position sensitivity/risk level and the duration of the appointment. The commensurate BI does not need to be initiated.

A badge may be issued following approval of the above waiver requirements and the badge will expire six months from the date of issuance. This process can only be used once for a short-term contractor in a twelve month period. This will ensure that any consecutive short-term appointments are subject to the full PFV-I identity proofing process.

For example, if a contractor employee requires daily access for a three or four-week period, this contractor would be cleared according to the above short-term requirements. However, if a second request is submitted for the same contractor employee within a twelve-month period for the purpose of extending the initial contract or for employment under a totally different contract for another three or four-week period, this contractor would now be considered "long-term" and must be cleared according to the long-term requirements as stated in this interim policy.

3. Intermittent Contractors:

An exception to the above-mentioned short-term requirements would be intermittent contractors.

a. For purposes of this policy, "intermittent" is defined as those contractor employees needing access to DOJ information systems and/or DOJ facilities or space for a maximum of one day per week, regardless of the duration of the required intermittent access. For example, the water delivery contractor that delivers water one time each week and is working on a one-year contract.

b. Contractors requiring intermittent access should follow the Department's escort policy. Please reference the August 11, 2004, and January 29, 2001, Department Security Officer policy memoranda that conveys the requirements for contractor facility escorted access.

c. Due to extenuating circumstances, if a component requests unescorted access or DOJ IT system access for an intermittent contractor, the same pre-employment background investigation waiver requirements that apply to short-term contractors are required.

d. If an intermittent contractor is approved for unescorted access, the contractor will only be issued a daily badge. The daily badge will be issued upon entrance into a DOJ facility or space and must be returned upon exiting the same facility or space.

e. If an intermittent contractor is approved for unescorted access, the approval will not exceed one year. If the intermittent contractor requires unescorted access beyond one year, the contractor will need to be re-approved each year.

4. An individual transferring from another department or agency shall not be re-adjudicated provided the individual has a current (within the last five years), favorably adjudicated BI meeting HSPD-12 and DOJ's BI requirements.

5.The DOJ's current escorted contractor policy remains unchanged by this acquisition notice.

NOTES:

15B20922Q00000014 Page 15 of 54

1. FIPS 201 is available at: www.csrc.nist.gov/publications/fips/fips201 /FIPS-201-22505.pdf.

2. Under HSPD-12, long-term contractors are contractors having access to DOJ information systems and/or DOJ facilities or space for six months or longer. The PIV-I identity proofing process, including initiation and adjudication of the required background investigation, is required for all new long-term contractors regardless of whether it is the current practice to issue a badge. The second phase of HSPD-12 implementation (PIV-II) requires badge issuance to all affected long-term contractors.

3. For contractors in position sensitivity/risk levels above level 1, a favorable review of a credit check is required as part of the pre-appointment waiver package.

4. In order to avoid a delay in the hiring process, components should request an Advance NAC Report when initiating investigations to OPM. Per OPM 's instructions, to obtain an Advance NAC Report, a Code " 3" must be placed in block "B " of the " Agency Use Only " section of the investigative form. This report is available for all case types.

5. For contractors in position sensitivity/risk levels above level 1, a favorable review of a credit check is required as part of the pre-appointment waiver package.

(End of Clause)

DJAR-PGD-06-09 Reprogramming of Funds Notices to Congress for A-76 Competitions

Congressional Notification Under the provisions of section 605(a) of the Department of Justice's appropriations act, an award in this procurement triggers a requirement that the Department notify congressional appropriations committees of actions resulting from the award which may include reorganization or contracting out of functions or activities presently performed by Federal employees.

An award in this procurement, and its implementation, are contingent upon satisfactory completion of the process required under section 605(a). After award, the Department will notify the source provider when this process has been satisfactorily completed and that implementation may begin. In the event that either congressional committee expresses reservations, the Department may cancel the procurement and award, without charge or penalty. Because the contract/performance start date could be delayed or actually cancelled due to the reprogramming notice to Congress, it is understandable not to include the expected start date in A-76 solicitations.

However, the lack of a contract/performance start date makes it difficult for potential source providers to propose realistic pricing in their proposals.

As a best practice, it is recommended that future solicitations for streamlined or standard competitions include a notice similar to the following sentences.

For pricing purposes only, offerors shall assume a contract/performance start date of [Start Date], which is the date it is assumed that the transition/phase-in period begins. The actual contract/performance start date may be different. (See the "Congressional Notification" term of the solicitation).

(End of Clause)

DJAR-PGD-07-10 Ensuring New Acquisitions Include Common Security Configurations

The following language is to be used in all appropriate solicitations and contracts.

(a) The provider of information technology shall certify applications are fully functional and…