Questions_and_Answers_(7_each)_Correction_in_quantity_(1_each)_and_Addition_in_quantity_(1_each)_to_Solicitation_15A00019Q00000067.docx

Questions and Answers Solicitation 15A00019Q00000067

Question: Item 0001 – there are 6 available sizes, can you confirm the requested size is for 2.3 inch x 1.1 pound?

Answer: Item 0001-Geoprime is listed correctly

Question: Item 0011 – Dyno no longer offers 12’ Electric Super. The shortest lead they offer is 16’. Would that size by acceptable? (note – there are 40 units per case of the 16’) Answer: Item 0011- ATF prefer the 12’ leg wires but that can be substituted if needed.

Question: Item 0013 – Brita Cord is an off-shore brand. Would Dyno Primacord 10 (see attached TDS) be accepted as a substitute?

Answer: Item 0013 Needs Britacord as listed.

Question: Item 0014 – Brita Cord is an off-shore brand. Would Dyno Primaline 21 (see attached TDS) be accepted as a substitute?

Answer: Item 0014 Needs Britacord as listed.

Question: Item 0015 – Dyno offers Blastex in 5 different diameters. What is the diameter required? (refer to attached TDS for options) Answer: Item 0015- it’s listed correctly (2x16)

Question: Item 0018 – Dyno offers Dynosplit C in 4 different sizes. What is the diameter required? (refer to attached TDS for options) Answer: Item 0018- Dynasplit C 1 1/4” diameter.

Question: We can’t find the specific requirements listed in the solicitation.

Item 0012 – Dyno SMS (Salt Mine Series) 16’ (360/case): what is the delay period required for this item? See attached tech data sheet for all options available.

Answer: 0ms delay on the Salt Mine Dets (SMS).

CORRECTION to Solicitation 15A00019Q00000067:

The quantity of Item #001 (Geoprime) is correctly listed under AEDT as 30. The total quantity should be 30, not 300.

ADDITION to Solicitation 15A00019Q00000067:

The quantity of Item #002 Under HME ONLY is listed as 15 cases. ATF is changing the HME quantity from 15 cases to 30 cases Blastex TX TDS[1].pdf

Technical Information

Properties

P-10A-08-18-15

See Product Disclaimer on page 2

BLASTEX® TX

Hazardous Shipping Description Explosive, Blasting, Type E, 1.5D, UN 0332 II

SDS

#1063

Density (g/cc) Avg 1.26 Energya (cal/g) 722 (cal/cc) 910 Relative Weight Strengtha 0.82 Relative Bulk Strengtha,b 1. 26 Velocityc (m/s) 4,700 (ft/s) 15,400 Detonation Pressurec (Kbars) 71 Gas Volumea (moles/kg) 42.8 Fume Class IME1 Shelf Life Maximum 1 year (from date of production) Maximum Water Depth 45 m (150 ft) Water Resistance Excellent a All Dyno Nobel Inc. energy and gas volume values are calculated using PRODET™ the computer code developed by Dyno Nobel Inc. for its exclusive use. Other computer codes may give different values.

b ANFO = 1.00 @ 0.82 g/cc c Unconfined @ 75 mm (3 in) diameter

Small Diameter Cast Booster Sensitive Emulsion

Product Description

BLASTEX TX is a booster sensitive, water resistant, packaged emulsion explosive specifically formulated to provide increased resistance to hydrostatic and/or dynamic transitory shock pressures which can result when used in wet and/or water saturated geologies. High strength microsphere density control ensures consistent explosive performance under increased hydrostatic pressures and in saturated ground conditions where the transmission of dynamic shock pressures from detonating blastholes would normally reduce the performance of standard cast booster sensitive explosives awaiting initiation in adjacent blastholes.

BLASTEX TX is a cost effective alternatives to most detonator sensitive, water resistant, packaged emulsion explosives and is available in easy-to-load Valeron plastic chub cartridges.

Application Recommendations

• Package diameter and type affect product density. Use cartridge count to determine actual explosive charge weight.

• Ensure continuous column loading. For column lengths in excess of 6 m (20 ft) or whenever column separation is suspected, multiple priming is recommended.

• ALWAYS use a cast booster as a primer for BLASTEX TX to ensure maximum performance.

• ALWAYS use a 340 g (12 oz) or larger cast booster with BLASTEX TX at internal product temperatures higher than -18º C (0º F). At internal product temperatures below -18º C (0º F) and higher than -34º C (-30º F) use a 454 g (16 oz) or larger cast booster.

Product Disclaimer Dyno Nobel Inc. and its subsidiaries disclaim any warranties with respect to this product, the safety or suitability thereof, or the results to be obtained, whether express or implied, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR OTHER WARRANTY. Buyers and users assume all risk, responsibility and liability whatsoever from any and all injuries (including death), losses, or damages to persons or property arising from the use of this product. Under no circumstances shall Dyno Nobel Inc. or any of its subsidiaries be liable for special, consequential or incidental damages or for anticipated loss of profits.

Dyno Nobel Inc.

2795 East Cottonwood Parkway, Suite 500, Salt Lake City, Utah 84121 USA Phone 800-732-7534 Fax 801-328-6452 Web www.dynonobel.com

BLASTEX® TX

Transportation, Storage and Handling

• BLASTEX TX must be transported, stored, handled and used in conformity with all applicable federal, state, provincial and local laws and regulations.

• Packaged emulsions have a shelf life of one (1) year when stored at temperatures between -18º C and 38º C (0º F and 100º F). Explosive inventory should be rotated.

Avoid using new materials before the old. For recommended good practices in transporting, storing, handling and using this product, see the booklet “Prevention of Accidents in the Use of Explosive Materials” packed inside each case ad the Safety Library Publications of the Institute of Makers of Explosives.

Case Dimensions 44 x 35 x 20 cm 17.25 x 13.875 x 7.7514

Diameter x Length Case Quantity

Case Weight Net Explosive Weight / Chub mm in kg lbs kg lbs 50 x 400 2 x 16 18 18.2 40 1.00 2.20 57 x 400 2 1/4 x 16 14 17.7 39 1.26 2.78 65 x 400 2 1/2 x 16 12 18.2 40 1.51 3.33 70 x 400 2 3/4 x 16 9 17.3 38 1.92 4.23 75 x 400 3 x 16 8 18.2 40 2.27 5.00

• Package diameter and type affect product density. Use cartridge count to determine actual explosive charge weight.

• All weights are approximate.

• BLASTEX TX is available in a wide variety of sizes. Custom sizes are subject to surcharge and may require longer than usual lead times.

• Check with your Dyno Nobel representative should you have any questions.

Packaging• NEVER use BLASTEX TX at internal product temperatures below -34º C (-30º F).

At internal product temperatures below -34º C (-30º F), adequate product warm-up time must be allowed after loading into boreholes and before initiation.

• Use with detonating cord is not recommended.

image4.emf

Dynosplit_C TDS[1].pdf

Properties*

P-14-08-18-15

DYNOSPLIT® C

Small Diameter Detonator Sensitive Continuous Packaged Watergel

DYNOSPLIT C is a detonator-sensitive, small diameter, water resistant, packaged watergel explosive designed for both surface and underground perimeter control applications such as contour, presplit and cushion blasting. DYNOSPLIT C is manufactured as a continuous packaged watergel, crimped every 400 mm (16 in) and traced internally with detonating cord. The continuous column can be cut to fit the designed load length, doubled or tripled as necessary to increase the explosive charge weight per foot and spliced to extend its length. In addition, the continuous column provides consistent borehole pressure throughout the entire loaded zone resulting in a uniform tensile shearing effect.

• ALWAYS use a Dyno Nobel high strength detonator or equivalent at internal product temperatures higher than 4º C (40º F). The product remains 5.3 g/m (25 gr/ft) detonating cord sensitive to 10º C (50º F).

• ALWAYS use a rope of sufficient strength to support the explosive column weight whenever loading boreholes with depths exceeding 25 m (80 ft) or when the explosive column weight exceeds 57 kg (125 lb). Attach the rope along the entire length of the powder column in 2 m (6 ft) intervals and secure the rope at the borehole collar.

• ALWAYS prime the second cartridge from the top of the explosives column if priming DYNOSPLIT C with an electric or nonelectric detonator. Punch the cartridge a few inches from its bottom. Insert the detonator and push it down firmly towards the bottom of the cartridge/aluminum wire clip. Ensure that the detonator is in close proximity to the internal detonating cord. Using the leg wires or shock tube, tie at least 2 half hitches on both the 1st and 2nd cartridges. With plastic tape, secure the primer cartridge at the point where the detonator was inserted as well as at each half hitch above that insertion.

Explosive, Blasting, Type E, 1.1D, UN 0241 II

* Dynosplit C is manufactured for Dyno Nobel by Hallowell Manufacturing by whom all properties and application recommendations were provided.

b Unconfined @ 5°C (41°F). The effective velocity of Dynosplit C acting to develop the presplit shear line is approximately 4,267 m/s (14,000 fps).

c Approved by Natural Resources Canada as Fume Class 1.

#1084

Density (g/cc) Avg 1.20 Relative Weight Strength 1.03 Relative Bulk Strength 1.54 Velocityb (m/s) >7,010 (ft/s) >23,000 Water Resistance Excellent Fume Class IME1 & NRCan1c

Shelf Life Maximum 1 year (from date of production)

Product Disclaimer Dyno Nobel Inc. and its subsidiaries disclaim any warranties with respect to this product, the safety or suitability thereof, or the results to be obtained, whether express or implied, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR OTHER WARRANTY. Buyers and users assume all risk, responsibility and liability whatsoever from any and all injuries (including death), losses, or damages to persons or property arising from the use of this product. Under no circumstances shall Dyno Nobel Inc. or any of its subsidiaries be liable for special, consequential or incidental damages or for anticipated loss of profits.

DYNOSPLIT® C

Size Weight / Length Length / Case mm x 400 in x 16 kg / m lbs / ft m /

25 kg case ft /

55 lb case 22 7/8 0.48 0.32 52 170 32 1 1/4 0.95 0.64 26 86 40 1 1/2 1.49 1.00 16 54 50 2 2.45 1.65 10.2 33

• Listed weights include the internal detonating cord coreload.

• Note: All weights / lengths are approximate.

• ALWAYS use detonating cord with a coreload of 5.3 g/m (25 gr/ft) or greater as the downline when priming DYNOSPLIT C with detonating cord. Expose approximately 40 cm (16 in) of the internal detonating cord by slitting the first explosives cartridge at the top of the explosives column and removing the the plastic film packaging and the explosives product from around the detonating cord. Attach the internal detonating cord tail directly to the initiating detonating cord downline using a square knot.

• ALWAYS use the plastic cable ties provided in each case to splice two lengths of DYNOSPLIT C together. Overlap the ends of the two lengths by 4 inches to be spliced by one full cartridge and use two cable ties to attach the overlapped cartridges side by side. Pull the ties down tight to complete the splice.

• DYNOSPLIT C must be transported, stored, handled and used in conformity with all applicable federal, state, provincial and local laws and regulations.

• Packaged watergel has a shelf life of one (1) year when stored at temperatures between -18ºC and 38º C (0ºF and 100ºF). Explosive inventory should be rotated.

Avoid using new materials before the old. For recommended good practices in transporting, storing, handling and using this product, see the booklet “Prevention of Accidents in the Use of Explosive Materials” packed inside each case and the Safety Library Publications of the Institute of Makers of Explosives.

Packaging image5.emf

Primaline SMS[1].pdf

PRIMALINE® SMS

Salt Mine Series

PRIMALINE SMS units consist of a High Strength detonator attached to a green 0.9 g/m (4 gr/ft) PRIMALINE detonating cord lead. Easy-to-read, color-coded delay tags display the period number and nominal firing time prominently.

PRIMALINE SMS units are designed for use with detonating cord trunklines to provide effective and accurate timing. Because of the self-consuming nature of the PRIMALINE SMS lead, these units are ideally suited for those mining operations, such as salt and chemical limestone, where contamination (by copper wire or plastic tubing) of the material blasted cannot be tolerated.

For detailed application recommendations, ALWAYS request a copy of Dyno Nobel’s Product Manual: NONEL® and PRIMACORD® from your Dyno Nobel representative.

• ALWAYS use non-cap sensitive explosives* in all holes initiated with PRIMALINE

SMS units. The PRIMALINE SMS lead can initiate a cap sensitive explosive column and bypass the detonator delay causing a misfire, which may kill or injure.

• ALWAYS maintain right angles (90°) between the PRIMALINE SMS lead and the detonating cord trunkline when making knot connections. PRIMALINE SMS units are initiated via a detonating cord trunkline of at least 5 g/m (25 gr/ft) such as PRIMALINE 5 detonating cord, which has a tacky surface giving it good knot holding characteristics.

I-35-08-18-15

#1123

Detonator assemblies nonelectric, 1.1B UN 0360 PG II

Net Explosive Content per 100 units* 5 m .50 kg 16 ft 1.1 lbs 6 m .61 kg 20 ft 1.3 lbs 7 m .71 kg 24 ft 1.6 lbs

* All weights and dimensions are approximate

Period / Delay Time

(msec)

Delay Tag Color

Period / Delay Time

(msec)

Delay Tag Color

0 / 0 Orange 9 / 450 Orange 1 / 50 Red 10 / 500 Yellow 2 / 100 Green 11 / 600 Tan 3 / 150 Orange 12 / 1000 White 4 / 200 Yellow 13 / 1400 Red 5 / 250 Tan 14 / 1800 Green 6 / 300 Lt. Blue 15 / 2400 Orange 7 / 350 Red 16 / 3000 Yellow 8 / 400 Green 17 / 3800 Tan

Product Disclaimer Dyno Nobel Inc. and its subsidiaries disclaim any warranties with respect to this product, the safety or suitability thereof, or the results to be obtained, whether express or implied, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR OTHER WARRANTY. Buyers and users assume all risk, responsibility and liability whatsoever from any and all injuries (including death), losses, or damages to persons or property arising from the use of this product. Under no circumstances shall Dyno Nobel Inc. or any of its subsidiaries be liable for special, consequential or incidental damages or for anticipated loss of profits.

PRIMALINE® SMS

Case Dimensions Detpak 48 x 45 x 26 cm / 18¾ x 17¾ X 10¾ in

Length

Case Type Quantity / Case m ft

4.5 16 Detpak 360 6 20 Detpak 320 7 24 Detpak 280

• Length rounded to nearest one-half meter.

• Case weight varies by length & delay; see case label for exact weight.

* NOTE: According to the Institute of Makers of Explosives (IME) Safety Library Publication No. 12, “Glossary of Commercial Explosives Industry Terms”, a cap sensitive explosive material is an explosive material which will detonate with an IME No. 8 TEST DETONATOR when the material is unconfined.

• ALWAYS tie the PRIMALINE SMS lead to the trunkline using a double wrap clove hitch. This particular knot provides the necessary surface area contact to initiate the minimal coreload Primaline SMS leads.

• ALWAYS make a closed loop of trunkline to provide two paths of initiation to each PRIMALINE SMS lead.

• ALWAYS ensure that the ANFO is properly formulated and is being used according to the manufacturer’s instructions. If ANFO cannot be used (due to the presence of water, for example), a non-cap sensitive primer or plastic shell slip-on-booster should be used.

• NEVER use nitroglycerin or nitrostarch-based explosives with PRIMALINE SMS units.

• NEVER hold the PRIMALINE SMS lead in your hand when initiating it. The PRIMALINE SMS lead is a low coreload detonating cord that detonates along its entire length. Any contact during initiation may kill or injure.

• NEVER splice the PRIMALINE SMS leads with any PRIMACORD® or PRIMALINE® detonating cords. The PRIMALINE SMS lead will not initiate itself or any other detonating cord through a knot and such a connection could cause misfires.

• NEVER use cartridge powders as primers unless they are non-cap sensitive or do not come in contact with the PRIMALINE SMS lead. ALWAYS be certain that only non-cap sensitive explosives are loaded with Primaline SMS units since the Primaline SMS lead may initiate the borehole columns and bypass the delay.

• PRIMALINE SMS must be transported, stored, handled and used in conformity with all federal, state, provincial and local laws and regulations.

• For maximum shelf life (3 years), PRIMALINE SMS must be stored in a cool, dry, well ventilated magazine. Explosive inventory should be rotated. Avoid using new materials before the old. For recommended good practices in transporting, storing, handling and using this product, see the booklet “Prevention of Accidents in the Use of Explosive Materials” packed inside each case and the Safety Library Publications of the Institute of Makers of Explosives.

Application Recommendations (continued) image1.emf

Primacord[1].pdf

PRIMACORD®

Detonating Cord

PRIMACORD detonating cords are flexible linear explosives with a core of PETN explosive encased in a textile outer jacket. PRIMACORD detonating cord detonates along its entire length at a velocity of approximately 7,000 m/s (23,000 ft/s).

PRIMACORD detonating cords are designed for use as trunklines and/or downlines in various mining, quarrying and construction applications.

• ALWAYS cut detonating cord with a sharp, non-sparking knife.

• NEVER attempt to cut detonating cords by abrasion or with a blow from a sharp or blunt object.

• ALWAYS use square knots to extend/join detonating cords that will propagate self-to-self. When connecting downlines to trunklines, always use a clove hitch knot and keep incoming and outgoing cords at right angles to avoid possibility of cut-offs.

• NEVER join PRIMACORD 1, 2 and 3 together with knots because it will not propagate self-to-self.

• ALWAYS use a detonating cord product, such as PRIMACORD 4Y or 4R or detonating cord with a greater explosive coreload as a trunkline to initiate PRIMACORD 1, 2 or 3.

Cord, Detonating, 1.1D, UN 0065, II EX 1992020035

MSDS

#1126

I-23-04-14-11

See Product Disclaimer on page 2.

• ALWAYS use a double wrap clove hitch knot to connect PRIMACORD 1, 2 and 3 detonating cord to the trunkline cord.

• NEVER allow trunklines and/or downlines to cross.

• Minimum recommended initiating detonator is a No. 8 strength.

• Minimum recommended cord initiator is a 3.6 g/m (18 gr/ft) detonating cord, such as PRIMACORD 4Y or 4R, or another detonating cord with an equal or greater explosive coreload.

• PRIMACORD must be transported, stored, handled and used in conformity with all federal, state, provincial and local laws and regulations.

• For maximum shelf life (5 years), PRIMACORD must be stored in a cool, dry, well ventilated magazine. Explosive inventory should be rotated. Avoid using new materials before the old. For recommended good practices in transporting, storing, handling and using this product, see the booklet “Prevention of Accidents in the Use of Explosive Materials” packed inside each case and the Safety Library publications of the Institute of Makers of Explosives.

See Page 2 for PRIMACORD Detonating Cord properties

Product Disclaimer Dyno Nobel Inc. and its subsidiaries disclaim any warranties with respect to this product, the safety or suitability thereof, or the results to be obtained, whether express or implied, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR OTHER WARRANTY. Buyers and users assume all risk, responsibility and liability whatsoever from any and all injuries (including death), losses, or damages to persons or property arising from the use of this product. Under no circumstances shall Dyno Nobel Inc. or any of its subsidiaries be liable for special, consequential or incidental damages or for anticipated loss of profits.

PRIMACORD®

Product

PETN

Coreload Outside

Diameter Tensile

Strength Color / Counter Weight / Case Spools / case Length / Spool

Net Explosives Content

(NEC) / 1000 ft g/m gr/ft mm in kg lbs kg lbs m ft kg lbs

PRIMACORD 1 1.5 7.5 3.18 0.125 68 150 Yellow / 5 Black 9 20 2 610 2000 0.5100 1.0720

PRIMACORD 2.5 2.4 12.5 2.8 0.110 27 60 Orange / 4 Black 12 25 2 610 2000 0.8117 1.7857

PRIMACORD 3 3.2 15 3.66 0.144 113 250 Red / 1 Black & 1 White 13 29 2 610 2000 1.0200 2.1440

PRIMACORD 4Y 3.6 18 3.61 0.142 68 150 Yellow / 1 Black 6 14 2 305 1000 1.2200 2.5720

PRIMACORD 4R* 3.6 18 3.61 0.142 68 150 Red 4 8 2 610 2000 1.2200 2.5720

PRIMACORD 5 5.3 25 3.99 0.157 68 150 Red / 1 Black 11 25 2 458 1500 1.7000 3.5730

PRIMACORD 8 8.5 40 4.47 0.176 90 200 Red / 2 Black 11 24 2 305 1000 2.7200 5.7160

PRIMACORD 10 10.8 50 4.70 0.185 90 200 Yellow / 2 Black 12 27 2 305 1000 3.4000 7.1450

* Pull-out Box

NOTE: Higher coreload detonating cords are available. Please contact your Dyno Nobel representative for details.

image2.emf

Primaline.pdf

PRIMALINE®

Detonating Cord

PRIMALINE detonating cords are flexible linear explosives with a core of PETN explosive encased in a plastic outer jacket. PRIMALINE detonating cords are designed for use as trunklines and/or downlines in abrasive mining, quarrying and construction applications.

• ALWAYS cut detonating cord with a sharp, non-sparking knife.

• NEVER attempt to cut detonating cords by abrasion or with a blow from a sharp or blunt object.

• ALWAYS use square knots to extend/join detonating cords that will propagate self-to-self. When connecting downlines to trunklines, always use a clove hitch knot and keep incoming and outgoing cords at right angles to avoid possibility of cut-offs.

• NEVER join PRIMACORD 1, 2 and 3 together with knots because it will not propagate self-to-self.

• ALWAYS use a detonating cord product, such as PRIMACORD 4Y or 4R or detonating cord with a greater explosive coreload as a trunkline to initiate PRIMACORD 1, 2 or 3.

• ALWAYS use a double wrap clove hitch knot to connect PRIMACORD 1, 2 and 3 detonating cord to the trunkline cord.

• NEVER allow trunklines and/or downlines to cross. Hazardous Shipping Description Cord, Detonating, 1.1D, UN 0065, II EX 1992020035

#1126

I-39-07-30-15

See Product Disclaimer on page 2.

• PRIMALINE must be transported, stored, handled and used in conformity with all federal, state, provincial and local laws and regulations.

• For maximum shelf life (5 years), PRIMALINE must be stored in a cool, dry, well ventilated magazine. Explosive inventory should be rotated. Avoid using new materials before the old. For recommended good practices in transporting, storing, handling and using this product, see the booklet “Prevention of Accidents in the Use of Explosive Materials” packed inside each case and the Safety Library Publications of the Institute of Makers of Explosives.

• 0589

See Page 2 for PRIMALINE Detonating Cord properties

• Minimum recommended initiating detonator is a No. 8 strength.

• Minimum recommended cord initiator is a 3.6 g/m (18 gr/ft) detonating cord, such as PRIMACORD 4Y or 4R, or another detonating cord with an equal or greater explosive coreload.

Product Disclaimer Dyno Nobel Inc. and its subsidiaries disclaim any warranties with respect to this product, the safety or suitability thereof, or the results to be obtained, whether express or implied, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND/OR OTHER WARRANTY. Buyers and users assume all risk, responsibility and liability whatsoever from any and all injuries (including death), losses, or damages to persons or property arising from the use of this product. Under no circumstances shall Dyno Nobel Inc. or any of its subsidiaries be liable for special, consequential or incidental damages or for anticipated loss of profits.

PRIMALINE®

Part Number Product

PETN

Coreload (nominal)*

Outside Diameter*

Tensile Strength* Color /

Counter Weight / Case* Spools

/ case Length / Spool*

Net Explosives Content

(NEC)*/ 1000 ft

Velocity of Detonation (minimum) m / secg/m gr/ft mm in kg lbs kg lbs m ft kg lbs

AF19045 PRIMALINE 4D 3.6 18 3.23 0.13 68 150 Pink 12 27 4 153 500 1.22 2.57 6,700

A718033 PRIMALINE4HS 3.6 18 3.05 0.12 45 100 Clear / Black Stripe 9 20 2 610 2000 1.22 2.57 6,700

A322030 PRIMALINE 5 5.3 25 3.58 0.14 50 110 Orange / Wax Coating 6 14 2 305 1000 1.70 3.57 6,700

AF25045 PRIMALINE 5D 5.3 25 3.23 0.13 45 100 Orange 11 24 4 153 500 1.70 3.57 6,700

A740030 PRIMALINE 8HS 8.5 40 3.99 0.16 45 100 Clear / Black Stripe 8 18 2 305 1000 2.72 5.72 6,700

A742030 PRIMALINE 8HT 8.5 40 3.23 0.13 45 100 Yellow 8 18 2 305 1000 2.72 5.72 6,700

A382004 PRIMALINE 21 21.3 100 5.84 0.23 90 200 Clear 16 35 2 244 800 6.80 14.29 6,700

A391052 PRIMALINE 32 31.9 150 7.11 0.28 90 200 Clear 7 16 2 153 500 10.20 21.44 6,300

A395022 PRIMALINE 42 42.5 200 7.62 0.30 90 200 Clear 21 47 1 365 1200 13.30 28.58 6,300

A398010 PRIMALINE 85 85.0 400 10.03 0.40 136 300 Light Green 19 41 1 153 500 27.20 57.16 6,300

* All weights and dimensions are approximate

Notes: 1. Higher coreload detonating cords may be available.

2. Alternative packaging is available for some products. Please contact your Dyno Nobel representative for details.

image3.emf