15805-Fatigue Test Stand Spindles-PD.pdf
PDF 191 KB Posted
- Attached to
- Fatigue Test Stand Spindles
- Solicitation number
- fa822726q3008
About this file
This is a Product Description and Specifications document for cyclic endurance test spindles issued by the U.S. Air Force 309th MXSS (Maintenance and Regeneration Group) at Hill Air Force Base. The requirement is designated as sole source and directed to Goodrich-PTS (Collins Aerospace), the original designer and intellectual property owner of the spindles. The document specifies the procurement of custom spindles for cycle test stands used in the PTO Shaft Cyclic Endurance Test Stand 53E19-95B, with required quantities of three U10100 new spindles, two U10615 new spindles, and one UA2086 new spindle. No additional accessories, software, or other components are explicitly required.
Contractually, the vendor must provide standard commercial warranty coverage and deliver all equipment to Hill Air Force Base, Attn: Dustin Cooper, 5832 H Avenue, Building 843 Bay J-Receiving, Hill AFB, UT 84056-5015. Data rights will be managed in accordance with DFARS 252.227-7015 for Technical Data on Commercial Products and Commercial Services, with Goodrich-PTS retaining all intellectual property rights related to the proposed components. The document carries CUI (Controlled Unclassified Information) classification and is dated 6/11/2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA822726Q3008.pdf | ||
| SSJ Signed Redacted.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CUI
U.S Air Force
Product Description and Specifications for Cyclic Endurance Test Spindles for PTO Shaft Cyclic Endurance Test Stand 53E19-95B
POC: Dustin Cooper 6/11/2026
Description and Specifications for Cyclic Endurance Test Spindles
The 309th MXSS has a requirement for the procurement of new custom spindles used in the cycle test stands. This is a sole source requirement directed to Goodrich-PTS (Collins Aerospace). These spindles were specially designed for our cycle test stands; therefore, the engineering drawings and specifications are Collins' intellectual property. Goodrich-PTS retains ownership of all intellectual property rights related to all components proposed herein. No intellectual property rights or licenses are granted to the IPT. Data Rights will be handled in accordance with DFARS 252.227-7015 Technical Data – Commercial Products and Commercial Services.
Test Spindle Specifications and Quantities that the product(s) must meet.
• 3 each of U10100 New spindle
• 2 each of U10615 New spindle
• 1 each of UA2086 New spindle
Required Accessories, Software or other components to be included.
None explicitly required based on the information provided.
CONTRACTUAL REQUIREMENTS
Warranty:
The contractor shall provide a standard commercial warranty
Delivery:
The contractor shall deliver the equipment to the following address located at Hill Air Force Base:
Attn: Dustin Cooper 5832 H Ave, Bldg. 843 Bay J-Receiving Hill AFB, UT 84056-5015
File details come from the government source that posted it. Updated .