15805-Fatigue Test Stand Spindles-PD.pdf
PDF 191 KB Posted
- Attached to
- Fatigue Test Stand Spindles
- Solicitation number
- FA8227-26-Q-FTSS
About this file
This is a Product Description and Specifications document for cyclic endurance test spindles required by the U.S. Air Force 309th Maintenance Group Sustainment Squadron (309th MXSS) at Hill Air Force Base. The procurement is designated as a sole source requirement directed to Goodrich-PTS (Collins Aerospace), as these spindles were custom-designed specifically for the PTO Shaft Cyclic Endurance Test Stand 53E19-95B. The engineering drawings and specifications are Collins' proprietary intellectual property, with Goodrich-PTS retaining all intellectual property rights. Data rights will be managed per DFARS 252.227-7015 Technical Data – Commercial Products and Commercial Services.
The required spindle quantities and models are: three each of U10100 New spindle, two each of U10615 New spindle, and one each of UA2086 New spindle. No additional accessories or software components are explicitly required. The contractor must provide a standard commercial warranty and deliver all equipment to Hill Air Force Base, attention Dustin Cooper, 5832 H Ave, Bldg. 843 Bay J-Receiving, Hill AFB, UT 84056-5015. The document is dated June 11, 2026, and is marked as Controlled Unclassified Information (CUI).
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOURCES SOUGHT SYNOPSIS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CUI
U.S Air Force
Product Description and Specifications for Cyclic Endurance Test Spindles for PTO Shaft Cyclic Endurance Test Stand 53E19-95B
POC: Dustin Cooper 6/11/2026
Description and Specifications for Cyclic Endurance Test Spindles
The 309th MXSS has a requirement for the procurement of new custom spindles used in the cycle test stands. This is a sole source requirement directed to Goodrich-PTS (Collins Aerospace). These spindles were specially designed for our cycle test stands; therefore, the engineering drawings and specifications are Collins' intellectual property. Goodrich-PTS retains ownership of all intellectual property rights related to all components proposed herein. No intellectual property rights or licenses are granted to the IPT. Data Rights will be handled in accordance with DFARS 252.227-7015 Technical Data – Commercial Products and Commercial Services.
Test Spindle Specifications and Quantities that the product(s) must meet.
• 3 each of U10100 New spindle
• 2 each of U10615 New spindle
• 1 each of UA2086 New spindle
Required Accessories, Software or other components to be included.
None explicitly required based on the information provided.
CONTRACTUAL REQUIREMENTS
Warranty:
The contractor shall provide a standard commercial warranty
Delivery:
The contractor shall deliver the equipment to the following address located at Hill Air Force Base:
Attn: Dustin Cooper 5832 H Ave, Bldg. 843 Bay J-Receiving Hill AFB, UT 84056-5015
File details come from the government source that posted it. Updated .