1560014624551_Special_Packaging_Instruction.pdf
PDF 356 KB Posted
- Attached to
- F-16 Transparencies Federal contract opportunity
- Solicitation number
- FA821221R0017
About this file
This document provides packaging instructions and wood treatment requirements for an indefinite-delivery, indefinite-quantity contract to procure F-16 Transparency Canopies for the Air Force over five years. The solicitation seeks to award a multiple-award IDIQ contract to qualified offerors to provide F-16 Transparency Canopies, which must be packaged and shipped according to the special instructions. These include applying protective covering to canopies prior to packaging, using specified fasteners and adhesives to construct containers, and heat treating wooden materials like pallets and crates to prevent the spread of invasive species. All wood packaging must be debarked and certified as heat treated to 56 degrees Celsius for 30 minutes by an accredited agency under American Lumber Standards Committee guidelines. The solicitation was issued by the Department of the Air Force Materiel Command Air Force Sustainment Center for a potential five-year ordering period for F-16 Transparency Canopies.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821221R0017.pdf | ||
| 1560014975078_SpecialPackagingInst.pdf | ||
| 1560014976599_Special_Packaging_Instruction.pdf | ||
| 1560014975959_Special_Packaging_Instruction.pdf | ||
| Packaging_SOW.pdf | ||
| 1560014976599IUID.pdf | ||
| 1560014975956_SpecialPackagingIns.pdf | ||
| Transportation.pdf | ||
| 1560014975959_IUID.pdf | ||
| FA821221R0017 FINALDRAFT.pdf | ||
| 1560014975078_IUID.pdf | ||
| 1560014624551_IUID.pdf | ||
| 1560014622040_IUID.pdf | ||
| Class JandA.pdf | ||
| Packaging.pdf | ||
| 1560014975956_IUID.pdf | ||
| 1560014622040_SpecialPackagingInst.pdf | ||
| Exhibit_Pricing_Workbook.pdf |
Show all 18
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 28 DECEMBER 2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NOTES
1. CAUTION: T.O. 16W2-5-2, SECTION 3, DESCRIBES THE PROTECTION TO BE APPLIED TO THE CANOPY PRIOR TO
PACKAGING OF THE ITEM. NSN FOR PROTEX10VS IS 7510-01-121-5011.
2. SIDES AND ENDS ARE FASTENED TO BASE WITH NAILS. DO NOT USE BOLTS.
2. SECURE REF.-2 AND REF.-3 TO CONTAINER TOP USING NAILS CONFORMING TO ASTM-F1667.
4. SECURE REF.-12 AND -13 TO CONTAINER AND REF.-13 TO -17 USING NAILS CONFORMING TO ASTM F1667.
5. LAMINATE USING ADHESIVE CONFORMING TO A-A-1936 TYPE II OR EQUAL.
6. SECURE LID USING REF.-22 AND -23.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
CAUTION NOTICES
File details come from the government source that posted it. Updated .