154-WPC_B10014.D.pdf

U.S. COAST GUARD

COMPUTERIZED MAINTENANCE SYSTEM

WPC-154

B10014.D

REV'D 10/15/17

ASSET NUMBER OPERATING ACTIVITY MAINTENANCE ACCOMPLISHED MAINTENANCE DUE

DATE ASSET HOURS DATE ASSET HOURS

MO DAY YEAR MO DAY YEAR

ZULU DATE ZULU TIME

MO DAY YEAR

ITEM 1

DUE

CMS CODE ACTION DESCRIPTION CEINUM

B10014 INSP/CLN UNDERWATER HULL P3-B000-001

SCHEDULED UNSCHEDULED

MAN HOURS: MK___.___DC___.___EM___.___ET___.___IT___.___GM___.___BM___.___FN___.___SN___.___ME___.___OTHER___.___

REMARKS:

TECHNICIAN'S

SIGNATURE

TECHNICIAN'S

ID

* ASTERISK INDICATES QA REQUIRED QA

REFERENCES:

COMDTINST M9000.6 Naval Engineering Manual NSTM, Chapter 081 (Waterborne Underwater Hull Cleaning of Navy Ships) EPA 800-R-11-004, Underwater Ship Husbandry Discharges

PRIVACY ACT STATEMENT

Authority: 44 U.S.C. 3101; 44 U.S.C. 3534; 5 U.S.C. §552a (e) (3); and Executive Order 9397.

Purpose: To account for scheduled and unscheduled maintenance performed on CG aircraft and surface assets.

Routine Uses: Authorized CG personnel will use this information to document scheduled and unscheduled maintenance, man-hours expended, and the technician responsible for tasks performed on CG aircraft and surface assets. Any external disclosures of data within this record will be made in accordance with DHS/ALL-004, General Information Technology Access Account Records, 77 Federal Register 70792, November 27, 2012.

Disclosure: Furnishing your Tech ID is voluntary; however, the inability to collect this information could result in untimely or incomplete Asset Computerized Maintenance System reports or the inability for the CG to make informed decisions regarding manpower analysis.

REVIEWED

BY

LOG YN DATA

ENTRY

COMPLETED

Distribution Statement D: Distribution authorized to the DHS/CG/DoD and their contractors Administrative/Operational use, 09/07/17. Other requests shall be referred to the appropriate asset product line.

WARNING: This document contains technical data whose export is restricted by the Arms Export-Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C. App 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

DESTRUCTION NOTICE: For classified documents, follow the procedures in DoD 5200.22-M, National Industrial Security Program Operating Manual, Section 5-705 or DoD 5200.1-R, Information Security Program Regulation, Chapter VI, Section 7. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

https://cg.portal.uscg.mil/sites/externaldata/Directives/CIM_9000_6F.pdf

WPC-154

B10014.D

REV'D 10/15/17

MK BM

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DC IT

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

EM FN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

ET SN

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

GM OTHER

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

NAME: ____________________________TECH ID/TH: _______/_____ NAME: ____________________________TECH ID/TH: _______/_____

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 2 of 7

WPC-154

B10014.D

REV'D 10/15/17

1 HULL UNDERWATER INSPECT/CLEAN

REFERENCES:

COMDTINST 9077.1 (series) Equipment Tag-Out Procedure

TOOLS/TESTEQUIPMENT:

NONE

EXPENDABLES:

NONE

CONSUMABLES:

NONE

A PRELIMINARY STEPS

1. Ensure that the area is safe for maintenance.

WARNING

ENSURE EQUIPMENT IS PROPERLY TAGGED OUT. FAILURE

TO COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY

OR DEATH.

NOTE: This procedure is for cleaning of the hull and hull components only. This MPC is not to be used for the annual inspect/clean. This is for all other cleaning that are conducted outside of the annual inspec-tion which will show up on the Cutters Maintenance Due List (MDL).

NOTE: Contact Patrol Boat Product Line Asset Manager for coordi-nation of contractor to conduct the underwater hull inspection via a service request through your EO.

2. Complete Red Danger Tags IAW COMDTINST 9077.1 (series).

B INSPECT/CLEAN

1. Inspect the entire underwater hull area.

a. Conduct a pre-clean biofouling inspection.

(1) Complete the pre-clean biofouling form, (Refer to Form 1).

NOTE: When completing the fouler rating, ensure that all (100%) of the area of the component/surface being inspected has a fouler rat-ing. For example, if only 50% of the rudder has growth at a FR-20 rating, then there should be another rating on the rudder that is 50% FR-0 rating for a clean rating over 50% of the area. All ratings should equal 100% of the area/component being inspected.

(a) Complete the fouler rating for each component, (Refer to Table 1).

2. Clean all hull components identified as unsat during the biofouling inspection.

C FINAL STEPS

1. Remove Red Danger Tags IAW COMDTINST 9077.1 (series).

DESTRUCTION NOTICE - Destroy by any method that will prevent disclosure of contents or reconstruction of the document. Page 3 of 7 https://cg.portal.uscg.mil/sites/externaldata/Directives/CI_9077_1D.pdf https://cg.portal.uscg.mil/sites/externaldata/Directives/CI_9077_1D.pdf https://cg.portal.uscg.mil/sites/externaldata/Directives/CI_9077_1D.pdf

WPC-154

B10014.D

REV'D 10/15/17

2. Attach Table 1 to the completed sign-off sheet.

NOTE: Once filed, the completed Table 1 can be retrieved from the CMM using the MPC number.

3. Send the completed sign-off sheet with Table 1 to your centralized maintenance manager.

4. Record maintenance action by completing appropriate sign-off, adding pertinent remarks.

DESTRUCTION NOTICE - Destroy by any method that the document. Page 4 of 7

WPC-154

B10014.D

REV'D 10/15/17

Type Fouling Rating (FR) Description Soft 0 A clean, foul-free surface; red and/or black AF paint or a bare metal surface.

Soft 10 Light shades of red and green (incipient slime). Bare metal and painted surfaces are visible beneath the fouling.

Soft 20 Slime as dark green patches with yellow or brown colored areas (advanced slime). Bare metal and painted surfaces may be obscured by the fouling.

Soft 30 Grass as filaments up to 3 inches (76 mm) in length; projections up to 1/4 inch (6.4 mm) in height; a flat network of filaments, green, yellow, or brown in color; or soft, non-calcareous fouling such as sea cucumbers, sea grapes, or sea squirts projecting up to 1/4 inch (6.4 mm) in height. The fouling cannot be easily wiped off by hand.

Hard 40 Calcareous fouling in the form of tubeworms less than ¼ inch in diameter or height.

Hard 50 Calcareous fouling in the form of barnacles less than ¼ inch in diameter or height.

Hard 60 Combination of tubeworms and barnacles, less than ¼ inch (6.4

mm) in diameter or height.

Hard 70 Combination of tubeworms and barnacles, greater than ¼ inch in diameter or height.

Hard 80 Tubeworms closely packed together and growing upright away from surface. Barnacles growing one on top of another, ¼ inch or less in height. Calcareous shells appear clean or white in color.

Hard 90 Dense growth of tubeworms with barnacles, ¼ inch or greater in height; calcareous shells brown in color (oysters and mussels);

or with slime or grass overlay.

Composite 100 All forms of fouling present, soft and hard, particularly soft sedentary animals without calcareous covering (tunicates) growing over various forms of hard growth.

FOULING RATINGS (FR) IN ORDER OF INCREASING SEVERITY

Table 1

DESTRUCTION NOTICE - Destroy by any method that the document. Page 5 of 7

WPC-154

B10014.D

REV'D 10/15/17

VESSEL NAME HULL TYPE/NUMBER LOCATION

(CITY)

DATE

(mm/dd/yy)

PRODUCT LINE INSPECTING ACTIVITY VISIBILITY (ft)

LOCATION OF LAST DRYDOCKING UNDOCKING DATE

LOCATION OF LAST PAINTING DATE

PAINT TYPE ANTIFOULING ANTICORROSION

UNDERWATER PHOTOGRAPHS TAKEN □ YES □ NO VIDEO TAKEN □ YES □ NO

COMPONENTS (CHECK IF)

N/A NOT INSPECTED

(PERCENTAGES MUST ADD UP TO 100)

Refer to Table 1

FOULER RATING FOULER RATING FOULER RATING

PROPELLER

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

SHAFT

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

RUDDER

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

FIN STABILIZER

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

SEA CHEST

TYPICAL (FWD) FR- % FR- % FR- %

TYPICAL (PORT) FR- % FR- % FR- %

TYPICAL (STBD) FR- % FR- % FR- %

BOWTHRUSTER

Propeller FR- % FR- % FR- %

Tunnel FR- % FR- % FR- %

PRE-CLEAN BIOFOULING INSPECTION DATA

Form 1

(Sheet 1 of 2)

DESTRUCTION NOTICE - Destroy by any method that the document. Page 6 of 7

WPC-154

B10014.D

REV'D 10/15/17

COMPONENTS (CHECK IF)

N/A NOT INSPECTED

(PERCENTAGES MUST ADD UP TO 100)

Refer to Table 1

FOULER RATING FOULER RATING FOULER RATING

BOW

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

BOTTOM

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

STERN

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

TRANSOM

PORT FR- % FR- % FR- %

STARBOARD FR- % FR- % FR- %

SIGNATURE (SHIP’S ENGINEER):

SIGNATURE (DIVING SUPERVISOR):

PRE-CLEAN BIOFOULING INSPECTION DATA

Form 1

(Sheet 2 of 2)

DESTRUCTION NOTICE - Destroy by any method that the document. Page 7 of 7