15210_specs.pdf

5600-Gallon 2 axle Stainless Steel Tanker.

Deep Drop Double Conical, Exterior Ring, Non-Code Trailer Shall be 5600 gallon minimum, 6500 gallon maximum

• 30" Deep Drop Double Conical

• Shell Material to be T304 Stainless steel, 12 gauge minimum. Two-piece barrel with one circumferential weld

• Shall have internal baffles to prevent liquid from sloshing back and forth in tank.

• Venting done by 3" minimum free breathing with elbow and splash deflector

• Vent shall allow the emptying of the tank without having to open any top vents or manholes

• Shall be 4” stainless steel drain pocket with 4” 90-degree flange stainless steel elbow attached outlet valve. 4” T to pump Line with 3” valve 3” SS cam lock connected to 3” Hose forward to pump connection to sump.

• Pump discharge plumbed 4” stainless to both curb and street side, with ¼ turn valve to 3”

Camlock.

• 3” stainless steel camlock cap on each discharge.

• 3” stainless steel suction T to pump with 3’ stainless steel male cam lock to face curb side of trailer with a ¼ turn valve before suction tee to allow drafting with this male cam lock through pump.

• All fittings and pipe shall be 4” stainless steel plumbed to & from motor driven pump.

• 13hp gas engine driven pump electric start 12vdc to include battery. Engine and pump to be enclosed in a stainless-steel cabinet with door to open for easy maintenance on pump and motor.

• Hose Carriers: Aluminum trough 4" high x 8" wide x 22' long curb side, Aluminum 8” x 21’

Tube on Street side rear. With 2 doors

• Shall have a manhole cover of 20 inches minimum.

• Pressurizing Line: Air pressurized 3/8“ SS pipe to ball valves for blow down at all shut off valves before 3” cam locks. To clean out product from plumbing.

• Shall have fenders over trailer tires and mounted on front of trailer to cover over the top of truck tires.

• Shall have air ride suspension.

• Shall have 10-hole hub piloted wheels.

• Shall be oil filled hubs

• OEM standard disk brakes

• Must have anti-lock braking system.

• OEM aluminum 22.5 X 8.25 wheels

• 11R-22.5 14 ply radial tires

• Shall have 2 speed landing gear.

• Shall have ladder to access manhole on top of tanker.

• Ladder shall be mounted to side of trailer and shall be made out of aluminum or stainless steel.

• Shall have LED lighting and lighting shall meet federal and South Dakota laws.

• Vendor decals and advertisement will not be allowed.

• All equipment shall be painted manufacturer's standard color.

• All self-propelled equipment & trailers shall be equipped with all lights required by South Dakota laws, including clearance & identification lights where required.

• Necessary documents for licensing (SDDOT, 700 E. Broadway, Pierre S.D. 57501).

• Turn Signal Lights: Manufacturer's standard.

• Pre-delivery: Regular manufacturer's standard warranty & complete pre-delivery inspection required with each unit. Each unit must be completely serviced by successful bidder in accordance with manufacturer's recommendations. The crankcase, differential, transmission & hydraulic system must be filled to recommended capacity.

• All Federal Safety requirements must be met.

• Delivery shall be FOB Destination with all transportation and delivery charges paid for by the vendor.

• Delivery to Mitchell, South Dakota

• Delivery date of 120 calendar days from the date of Purchase order. Penalty of $50.00 per unit may be assessed for each calendar day that delivery exceeds 120 days plus 5 working days for DOT inspection of units. Penalty may be assessed until units are accepted;

incomplete units will not be accepted. Units delayed due to any reason, DOT and Office of

Procurement shall be notified in writing within 5 working days of vendor being notified. Taking exception to the delivery time may constitute grounds for rejection of bid. Each DOT location shall be notified of delivery a minimum of 24 hours before delivery.