15' Commercial Rotary Cutter Spec.docx

DOCX document 19 KB Posted

Attached to
MoDOT Statewide Commercial Rotary Cutters
Solicitation number
300000297597402
Issued by
Missouri

About this file

This is a specification document for a 15-foot commercial rotary cutter to be procured through a state and local contract opportunity. The equipment must be a three-section, flexible rotary cutter with an acceptable cutting width of 13.5 to 15 feet, PTO-driven at 540 RPM. Key operational requirements include a 360-degree swivel hitch, CAT 5 or CAT 6 drivelines for both main and wing components, and minimum gearbox horsepower ratings of 250 HP for the divider unit and 225 HP for both center and wing gearboxes. The cutter must feature independent hydraulic lift systems, stump jumpers on all decks, and cutting capability for material up to 3.5 inches in diameter with a cutting height range from 4 inches minimum to at least 12 inches maximum.

The specification establishes comprehensive technical and safety standards for deck construction, requiring either minimum 7-gauge single-deck or 10-gauge double-deck configuration with deck protection rings. Tire configurations must include laminated, severe-duty, or oversized skid-steer style options with either four wheels on the center frame plus one per wing or two wheels on the center frame plus one per wing. Additional requirements include a minimum 5-year gearbox warranty, Slow-Moving Vehicle emblem, double-row 5/16-inch safety chains, and a parking jack. Left and right wing blades must rotate in opposite directions (clockwise and counterclockwise, respectively) to reduce flying debris, with a minimum 6-inch blade overlap and wing working angles of 22 degrees down and 45 degrees up.

View the file

Other files

File Type Posted
MODOT 0000000448SL_2_SUPPLIER.pdf PDF
MoDOT Trade Form.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

15’ Commercial Rotary Cutter Specification

1. General Requirements

• Three‑section, flexible 15 ft rotary cutter; acceptable cutting width range: 13.5–15 ft

• PTO‑driven, 540 RPM

2. Driveline Requirements

• Main Driveline: CAT 5 or CAT 6

• Wing Driveline: CAT 5 or CAT 6 (CAT 4 acceptable only with wing slip clutches)

• Main Driveline Protection: Slip clutch

3. Hitch

• 360‑degree swivel hitch

4. Gearbox Requirements

• Divider Gearbox: Minimum 250 HP

• Center Gearbox: Minimum 225 HP

• Wing Gearboxes: Minimum 225 HP

5. Blade Rotation

• Left Wing: Clockwise (CW)

• Right Wing: Counterclockwise (CCW)

• Intent: Reduce flying debris

6. Cutting Components

• Stump jumpers on all cutter decks

• Minimum cut capacity: 3.5 in diameter material

• Wing working angles: 22° down, 45° up

• Cutting height range: as low as 4” and must raise to at least 12”

• Blade overlap: Minimum 6 in

7. Tires & Wheels

• Tire Options: Laminated, severe‑duty or oversized skid‑steer‑style tires

• Acceptable configurations:

· 4 wheels on center frame + 1 per wing (laminated/severe‑duty), OR

· 2 wheels on center frame (oversized or skid‑steer) + 1 per wing (any specified tire type)

8. Suspension

• Torsional or spring suspension permitted

9. Hydraulics

• Main cutter lift via hydraulic cylinder

• Independent hydraulic cylinders for wing lifts

10. Deck Construction

• Minimum 7‑gauge single‑deck construction, OR

• Minimum 10‑gauge double‑deck (top and bottom)

• Deck protection rings required

11. Safety Requirements

• Slow‑Moving Vehicle (SMV) emblem

• Double‑row 5/16 in front and rear safety chains

12. Miscellaneous

• Parking jack included

13. Warranty

• Minimum gearbox warranty: 5 years

File details come from the government source that posted it. Updated .