15' Commercial Rotary Cutter Spec.docx
DOCX document 19 KB Posted
- Attached to
- MoDOT Statewide Commercial Rotary Cutters
- Solicitation number
- 300000297720342
- Issued by
- Missouri
About this file
This specification document outlines the technical requirements for 15-foot commercial rotary cutters to be procured by the Missouri Department of Transportation (MoDOT) and Missouri Highways and Transportation Commission (MHTC) through an Invitation for Bid process. The contract is for an as-needed, if-needed basis with a base term of two years following the contract award date, with three optional one-year renewal periods. Bids will be received electronically through MissouriBUYS MOVERS, by mail via USPS, UPS, or FedEx, or by hard copy with five days' advance notice to buyer Ashten Nichols. The solicitation does not accept email submissions. Interested parties should contact Ashten Nichols at ashten.nichols@modot.mo.gov or (573-751-3685) for additional information.
The specification establishes comprehensive technical requirements for three-section, flexible rotary cutters with cutting widths between 13.5 and 15 feet, including detailed standards for drivelines (CAT 5 or CAT 6), gearbox ratings (minimum 250 HP for divider, 225 HP for center and wing gearboxes), blade rotation patterns, cutting capacity of 3.5-inch diameter material, suspension systems, hydraulic operations, and deck construction (minimum 7-gauge single-deck or 10-gauge double-deck). The specifications mandate safety features including SMV emblems, double-row safety chains, stump jumpers, and parking jacks, along with a minimum five-year gearbox warranty. The document does not specify pricing terms, funding amounts, or set-asides.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MODOT 0000000448SL_1_SUPPLIER.pdf | ||
| MoDOT Trade Form.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
15’ Commercial Rotary Cutter Specification
1. General Requirements
• Three‑section, flexible 15 ft rotary cutter; acceptable cutting width range: 13.5–15 ft
• PTO‑driven, 540 RPM
2. Driveline Requirements
• Main Driveline: CAT 5 or CAT 6
• Wing Driveline: CAT 5 or CAT 6 (CAT 4 acceptable only with wing slip clutches)
• Main Driveline Protection: Slip clutch
3. Hitch
• 360‑degree swivel hitch
4. Gearbox Requirements
• Divider Gearbox: Minimum 250 HP
• Center Gearbox: Minimum 225 HP
• Wing Gearboxes: Minimum 225 HP
5. Blade Rotation
• Left Wing: Clockwise (CW)
• Right Wing: Counterclockwise (CCW)
• Intent: Reduce flying debris
6. Cutting Components
• Stump jumpers on all cutter decks
• Minimum cut capacity: 3.5 in diameter material
• Wing working angles: 22° down, 45° up
• Cutting height range: as low as 4” and must raise to at least 12”
• Blade overlap: Minimum 6 in
7. Tires & Wheels
• Tire Options: Laminated, severe‑duty or oversized skid‑steer‑style tires
• Acceptable configurations:
· 4 wheels on center frame + 1 per wing (laminated/severe‑duty), OR
· 2 wheels on center frame (oversized or skid‑steer) + 1 per wing (any specified tire type)
8. Suspension
• Torsional or spring suspension permitted
9. Hydraulics
• Main cutter lift via hydraulic cylinder
• Independent hydraulic cylinders for wing lifts
10. Deck Construction
• Minimum 7‑gauge single‑deck construction, OR
• Minimum 10‑gauge double‑deck (top and bottom)
• Deck protection rings required
11. Safety Requirements
• Slow‑Moving Vehicle (SMV) emblem
• Double‑row 5/16 in front and rear safety chains
12. Miscellaneous
• Parking jack included
13. Warranty
• Minimum gearbox warranty: 5 years
File details come from the government source that posted it. Updated .