15' Commercial Rotary Cutter Spec.docx

DOCX document 19 KB Posted

Attached to
MoDOT Statewide Commercial Rotary Cutters
Solicitation number
300000293787525
Issued by
Missouri

About this file

This is a specification document for a 15-foot commercial rotary cutter procurement. The equipment must be a three-section, flexible rotary cutter with an acceptable cutting width range of 13.5 to 15 feet, driven by a 540 RPM power takeoff (PTO) system. The specification establishes detailed technical requirements across multiple operational components including driveline configurations (CAT 5 or CAT 6 rated), gearbox minimum horsepower ratings (250 HP for divider, 225 HP for center and wing gearboxes), and hydraulic lift systems. The cutter must feature a 360-degree swivel hitch, stump jumpers on all decks, and a minimum cut capacity of 3.5-inch diameter material with adjustable cutting heights between 4 and 12 inches. Blade rotation specifications require counterclockwise rotation on the right wing and clockwise on the left wing to minimize flying debris, with a minimum 6-inch blade overlap between sections.

The specification includes tire and wheel configuration options allowing for either laminated or severe-duty tires with various wheel placement arrangements, torsional or spring suspension systems, and deck construction requirements of either minimum 7-gauge single-deck or 10-gauge double-deck construction with protection rings. Additional mandated features include independent hydraulic cylinders for wing lifts, a parking jack, and safety requirements including a Slow-Moving Vehicle emblem and double-row 5/16-inch front and rear safety chains. The procurement specifies a minimum five-year gearbox warranty as a contractual requirement.

View the file

Other files

File Type Posted
MODOT 0000000448SL_SUPPLIER.pdf PDF
MoDOT Trade Form.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

15’ Commercial Rotary Cutter Specification

1. General Requirements

• Three‑section, flexible 15 ft rotary cutter; acceptable cutting width range: 13.5–15 ft

• PTO‑driven, 540 RPM

2. Driveline Requirements

• Main Driveline: CAT 5 or CAT 6

• Wing Driveline: CAT 5 or CAT 6 (CAT 4 acceptable only with wing slip clutches)

• Main Driveline Protection: Slip clutch

3. Hitch

• 360‑degree swivel hitch

4. Gearbox Requirements

• Divider Gearbox: Minimum 250 HP

• Center Gearbox: Minimum 225 HP

• Wing Gearboxes: Minimum 225 HP

5. Blade Rotation

• Left Wing: Clockwise (CW)

• Right Wing: Counterclockwise (CCW)

• Intent: Reduce flying debris

6. Cutting Components

• Stump jumpers on all cutter decks

• Minimum cut capacity: 3.5 in diameter material

• Wing working angles: 22° down, 45° up

• Cutting height range: as low as 4” and must raise to at least 12”

• Blade overlap: Minimum 6 in

7. Tires & Wheels

• Tire Options: Laminated, severe‑duty or oversized skid‑steer‑style tires

• Acceptable configurations:

· 4 wheels on center frame + 1 per wing (laminated/severe‑duty), OR

· 2 wheels on center frame (oversized or skid‑steer) + 1 per wing (any specified tire type)

8. Suspension

• Torsional or spring suspension permitted

9. Hydraulics

• Main cutter lift via hydraulic cylinder

• Independent hydraulic cylinders for wing lifts

10. Deck Construction

• Minimum 7‑gauge single‑deck construction, OR

• Minimum 10‑gauge double‑deck (top and bottom)

• Deck protection rings required

11. Safety Requirements

• Slow‑Moving Vehicle (SMV) emblem

• Double‑row 5/16 in front and rear safety chains

12. Miscellaneous

• Parking jack included

13. Warranty

• Minimum gearbox warranty: 5 years

File details come from the government source that posted it. Updated .