STATEMENT OF WORK

Janitorial Service at Cheyenne, WY

1. Purpose and Location

The National Weather Service (NWS) Weather Forecast office (WFO) located in Cheyenne, WY, requires regular janitorial services in order to maintain a clean and safe work environment for the staff. This is a standard administrative office type environment. The office operates 24/7, including holidays and has up to 21 total office employees with some working at a given time during regular business hours, and a few employees that work nights and weekends. This office also occasionally hosts visitors and conducts small group tours.

The Contractor shall be responsible for satisfactorily managing and performing cleaning as specified herein at the following location:

National Weather Service 1301 Airport Parkway Cheyenne, WY 82001-1549

2. Government On-Site Points of Contact:

On-site Contacts:

Operations/Meteorologist-in-Charge (MIC) – CONTACT INFO PROVIDED UPON AWARD

Prior to the onset of providing janitorial services, the Contractor MUST participate in an onsite meeting with one of the agency contact persons. The purpose of the meeting is to provide an opportunity for a designated government representative to identify the office’s unique security requirements (such as sign-in/out process), establish a working relationship, determine the fixed schedule for work on site, and address any lingering questions regarding expectations and requirements, within the scope of work.

3. Square Footage/Site Conditions

The area covered by this contract is a single-story office building of approximately 5,370 square feet of cleanable space (approximately 35% carpet, 65% tile), 34 windows, and 4 glass entry ways. There are two small bathrooms, one for men and one for women. There is one small break room/kitchenette, an operations area, electronics shop, server room, cubicles, and offices.

4. Period of Performance and Schedule

The base period of performance for this requirement is 12 months, from date of award to 12 months.

Cleaning will take place Monday, Wednesday, and Friday, between 7:00 am and 7:00 pm. The actual work hours on site will be determined during the onsite meeting with the designated government representative referenced in Section 2. Contractor employees working on site shall arrive at the same time each day of work in order to maintain consistent operations at the office.

Observance of Legal Holidays and Site Closure Information

The Contractor shall observe any federal holidays set forth in the referenced Department of Labor Wage Determinations, if the holiday falls within the service period of this contract.

When any holiday falls on a Saturday, the preceding Friday is observed; when any holiday falls on a Sunday, the following Monday is observed. All personnel assigned to this contract shall limit their observation of holidays to those set forth above.

In each instance, the Contractor agrees to continue to provide sufficient personnel to perform requirements of any critical tasks already in operation or scheduled, and shall be guided by the instructions issued by the Contracting Officer or the designated government representative. in the event of a site dismissal or closure due to weather, emergency or other circumstances, the contractor is instructed to contact the designated government representative or alternate designated government representative for guidance.

5. Government-Furnished Equipment, Materials, and Supplies

The Government will furnish to the Contractor the utilities necessary to perform the work, as well as the keys needed to open the paper towel and other dispensers.

6. Contractor-Furnished Equipment, Materials, and Supplies

The Contractor shall furnish and properly store in the areas designated by the designated government representative all equipment, materials, and supplies, with SDS for chemicals, necessary to perform the work, including, but not limited to, the following:

· Cleaning equipment

Recovered Materials and Biobased Products

The Contractor shall utilize products made from recovered materials and/or biobased products to the maximum extent possible without jeopardizing the intended end use or detracting from the overall quality delivered to the end user. All supplies and materials shall be of a type and quality that conform to applicable Federal specifications and standards.

Products that must be made from recovered materials are detailed in the EPA’s Comprehensive Procurement Guideline (CPG) Program at https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program#products. Sources of supply for recovered materials products can be found at https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program#directory

The following is an example list of products that may be used in this contract for which recovered materials products are available. The list is not all inclusive.

· General purpose industrial wipes

Biobased products that are designated for preferred procurement under USDA’s BioPreferred program must meet the required minimum biobased content as stated in the USDA Final Rule available at www.biopreferred.gov. Sources of supply for biobased products can be found in the USDA’s Biopreferred Catalog at https://www.biopreferred.gov/BioPreferred/faces/catalog/Catalog.xhtml

The following is an example list of products that may be used in this contract for janitorial service for which biobased products are available. The list is not all inclusive.

If a product is available under both the EPA Recovered Materials requirement and the USDA Biobased/Biopreferred requirement, the contractor shall purchase the EPA-designated item.

A list of products and their Safety Data Sheets (SDS) shall be kept on file in accordance with applicable guidelines of the OSHA Hazard Communications Standard.

7. Supervisor and Labor

The Contractor shall promptly remove from the work site any supervisor or employee whose work or conduct is not satisfactory. The Contractor’s supervisor shall be in charge of the work on behalf of the Contractor. The Contractor shall enforce strict discipline and good order among the Contractor’s employees. The Contractor shall exercise the necessary supervision and control to prevent Contractor’s employees from violating any rules and regulations.

8. Conduct of Work

The Contractor is responsible for satisfactorily managing and performing cleaning as specified. Services performed under this contract shall be performed during hours approved by the designated government representative. The contractor will adhere to the sign-in/out process that is identified by the designated government representative during the mandatory pre-work meeting (see section 2).

The Contractor must ensure employees are physically able to accomplish the work specified herein. All such employees working on Government premises are subject to all applicable Federal rules and regulations with regard to entering and leaving the building(s).

The Contractor must take precautions necessary for the protection against injury of all persons engaged at the site. Applicable Department of Labor and Occupational Safety and Health Standards will be taken into consideration in the performance of this contract. The Contractor will take all reasonable precautions to prevent the escape of fire and to suppress the same.

The contractor must maintain a secure environment while cleaning the facility. No one is allowed into the facility other than those individuals responsible for performing janitorial services and that have completed a security background investigation with favorable results.

The contractor is to provide all supervisory and general control over all day-to-day operations of his/her employees, including control over all workers’ duties, and these services must be satisfactory to the government.

The contractor shall bring any noted defect, disease or insect infestation of the premises to the attention of the designated government representative or designee. Services under this contract must be performed in such a way that there will be minimal interruption to or interference with the normal operation of Government business on the premises.

The required result is maintenance of the facility(s) in such a manner as to provide a clean, healthy and safe work environment for the occupants of the premises. All rules concerning safety, smoking and the security of the building must be observed.

9. Security Requirements

This requirement is designated as a low-risk non-IT service contract with personnel who will be affiliated with the Department of Commerce (DOC) for 180 days or more, that requires contractor personnel to be granted unsupervised official access to perform work at a federally-controlled facility. This designation requires a minimum of a Tier 1 Investigation with a minimum for Homeland Security Presidential Directive 12 (HSPD-12) credentialing.

Within five business days of contract award, the Contractor is required to designate at least one, but no more than three, contractor personnel to work at the site. These personnel must complete a Tier 1 Investigation.

Initiating the Investigation

To initiate the investigation, the following completed documents must be submitted to the Sponsor (Contracting Officer or other designated government representative) for each designated person within five business days of contract award. Blank versions of these documents will be provided to the Contractor upon contract award. The Sponsor will send the contractor a request to upload the files to Kiteworks, a secure file collaboration tool; the documents must not be emailed.

· Security Coversheet/Investigation Request

· OF-306 Declaration for Federal Employment

· Fingerprint cards (SF-87 or FD-258, obtained at place of fingerprinting)

· Resume (no standard format)

· Foreign Nationals with less than 3-years-out-of-five residence in the U.S. will also complete the SAC form (INV Form 86C)

Contractor personnel with pending security investigation results may not commence work on site unless explicitly informed in writing by the Contracting Officer that they may proceed. Personnel that do not receive a favorable result will not be permitted to continue work on the site.

End of Service

Any Government-provided identification issued to contractor personnel shall be returned to the NWS:

· When no longer needed for contract performance

· Upon completion of contractor personnel’s employment

· Upon contract completion or termination, when a follow-on contract is not awarded or reasonably anticipated

· Failure to comply with the return of government-issued identification may result in delay of final payment.

10. Service Requirements

All sweeping of resilient floor covering must be by the dustless pickup method using either the laundered or the disposable type of treated cloths, as appropriate. All dusting must be done by the damp or treated cloth method.

The raised tile floor in the operations and equipment rooms has a special, static-free lamination to protect the equipment in the area. The Contractor shall only use floor cleaners recommended by the manufacturer of the floor tiles. The Operations areas have many computer cords that extend from the floor; cleaning must be done within 12” of these cords. No tables, equipment, or cords will be moved to clean around or behind them.

All methods and materials used in all cleaning work must leave surfaces free of debris, film, streaks, spots, and stains. The Contractor must dispose of all waste in the proper recycle or trash receptacles out of the building.

The Contractor shall return all cleaning products and equipment to the designated storage location upon completing work each day.

a. Work to be performed three times per week on Mondays, Wednesdays and Fridays

i. All trash receptacles must be emptied and returned to their initial location. Empty and clean ash receptacles. Remove all trash to appropriate outside receptacles (Recycle or Trash receptacle). Wash or damp wipe inside and outside of all trash receptacles presenting a soiled or odorous condition, leaving the receptacle free of soil and odor. Replace liners when torn or soiled with a fresh liner.

ii. Thoroughly vacuum all carpeted areas and rugs, leaving them free of dust balls, dirt, and other debris. This includes entrance ways at front and rear of building. Floor edges (around doorways and where flooring changes) will also be left free of debris. Move and vacuum under all easily movable objects (chairs, trash receptacles, tables on wheels, typing stands, boxes). Put all items that were moved back in place. Vacuum cleaner contents will be removed to a dumpster. Carpet spot cleaning is required on an as-needed basis for spots equal to or larger than the size of a dime.

iii. Thoroughly dust-mop all non-carpet areas, excluding the server room. Move a dust mop under all easily movable objects (chairs, waste receptacles, tables on wheels, typing stands, boxes). Put all items that were moved back in place. Dust mops must be treated with water-based dust control chemicals. The Contractor will contain the dust and dirt and remove it to a dumpster.

iv. In the break room/kitchen, clean and disinfect the floors, fixtures, sinks, walls around the sink, countertops, and table. Leave surfaces absent of film, streaks, and stains.

v. In the restrooms, sweep and damp mop floors with a germicidal solution, paying special attention around sinks, toilets, and urinals. Floors will be left absent of debris. Clean and disinfect fixtures, handicap rails, sinks and walls around sinks, countertops, mirrors, toilets, urinals, and walls around urinals. Empty and disinfect all sanitary napkin receptacles. Refill soap, towels, toilet paper, and seat cover dispensers. Maintain a one-month supply of soap, towels, toilet paper and seat protectors in the janitorial closet.

vi. Clean and disinfect all drinking fountains including the drains and exterior surfaces of fountain. Drinking fountains must be free of streaks, stains, spots, smudges, scale, and other obvious soil.

vii. Clean and polish glass entrance door inside and out.

b. Work to be performed weekly, on Wednesday

i. Wet-mop all uncarpeted floors, including hallways, using a detergent solution. Remove all oil, tar, and stubborn dirt.

ii. In the break room/kitchen clean & mop the tile floor; wipe exterior of all appliances including recycle bins, trash receptacles, and walls.

c. Work to be performed on the first Friday of every month

i. Damp-wipe all office fixtures, window sills, walls, doors, splash guards, baseboards, and ledges. Damp mop plastic chair mats. Leave window blinds free of dust. Remove cobwebs.

ii. Dust or polish, as appropriate to the surface, all high and low surfaces, ledges, cabinet tops, and ventilators on which dust gathers. Clean and polish all finished wood surfaces in the building, including but not limited to, the table and book cases in the conference room.

iii. In the restrooms: clean pipes beneath all sinks; polish chrome; clean light switches; doors; and kick plates; spot clean walls; clean screens on sink faucets.

iv. Thoroughly dust mop the server room. Dust mops must be treated with water based dust control chemicals and must also control static charge. This cleaning requires direct supervision by an NWS employee.

11. Inspection and Acceptance

The Contractor, not the Government, is responsible for management and quality control actions to meet the terms of this contract. The role of the Government is to inspect work performed to ensure contract standards are met.

As evidence of work performed, the Contractor will submit a completed service report summarizing work performed on a weekly basis to the designated government representative. The Government representative will affirm the work was performed, sign the service report, and provide a signed copy back to the contractor within 5 business days.

The Government will perform inspections during the contract at regular intervals. Methods may include visual survey. If any of the services do not conform to the contract requirements as outlined, the Government may require the Contractor to perform the services again in conformity with contract requirements, at no increase in contract amount, or the Government may accept the service with price reduction. Repeated failure to do meet contract requirements shall be considered for remedial action.

12. Deliverables

material that will be used in performance of this contract.

Ref. FAR 52.223-3 and FED-STD-313E At start of work, and as needed if products are changed Contracting Officer and Designated Government Representative

facilities and occupants from harm. Ref. CAR 1352.237-71

Government Representative

Government Representative

were performed, or problems found during the service visit

Government Representative

Biobased Report (copy) Report purchases of Biobased products in System for Award

Evidence of Sexual Assault and Sexual Harassment training completion To maintain a work environment free from sexual assault and sexual harassment. Ref. NAM 1330- 52.222-70

Within 40 business days of contract award Contracting Officer

13. Invoicing

The Contractor will submit invoices on a monthly basis in arrears in the Department of Treasury Invoice Processing Platform (IPP).

SAMPLE SERVICE REPORT

DATE: LOCATION:

SERVICES PERFORMED:

PROBLEMS NOTED:

COMMENTS & REMARKS:

I CERTIFY THAT THIS REPORT IS ACCURATE AND WORK PERFORMED WAS COMPLETED IN ACCORDANCE WITH THE CONTRACT SPECIFICATIONS

Name and Signature of Authorized Contractor Representative Date

Name and Signature of Authorized Government Representative Date