BENCHES_Solicitation_Amendment_to_original_RFQ_number_140R8125Q0202_FINAL_Q_A_22AUG2025_0001.pdf
PDF 695 KB Posted
- Solicitation number
- 140R8125Q0290
About this file
This document is a Solicitation Amendment and Questions & Answers (Q&A) for a Request for Quote (RFQ) numbered 140R8125Q0202, dated 22 August 2025, concerning benches. The Q&A addresses technical specifications and configuration details for L-shaped benches, including drawer placement and orientation. Key clarifications include: (1) L-shaped benches require side swapping as indicated by arrows on the attached drawing, (2) when two drawer sets are requested for one bench, the intent is to have drawers on both sides of the bench, and (3) height requirements for each bench section are detailed in a separate Line-Item with Description Table. The isometric view drawing provides a scale 1:45 visual representation of the bench configuration, with blue arrows indicating the required side swap for the bench's drawer sections.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
BENCHES_Solicitation Amendment to original RFQ number 140R8125Q0202_FINAL
Q&A_22AUG2025
1. Question: Would you kindly be able to mark the drawing with changes needed.
Answer: There are no drawing changes. Please refer to the Complete and Final Line-Item with Description Table.
The L-shaped benches need the sides swapped – see the arrows on the drawing attached below. Same for both benches.
2. Question: Will customer have drawers stacked on both sides of the bench left and right D4"+D4"+D6?
Answer: Yes, when two sets of drawers are requested for one bench, the intent is to have drawers on either side of the bench.
3. Question: Or customer needs D4"+D4"+D4"+D4"+D6"+D6"? In case needing this drawer configuration stacked they do not fit since on the first section they have bottom shelf.
Answer: See above, drawers on both sides of the bench.
4. Question: Can you please list the height requirement for each section?
Answer: Please refer to the Complete and Final Line-Item with Description Table.
Each bench has an initial height and in some cases, an extension height.
BENCHES_Solicitation Amendment to original RFQ number 140R8125Q0202_FINAL
Q&A_22AUG2025
File details come from the government source that posted it. Updated .