140R8125Q0165_Notice_of_Intent_and_SOW_1.pdf

Special Notice

Notice of Intent to Sole Source

TPP G-20 Annunciator Upgrade

This is not a solicitation. This is a notification of an intent to award a single source procurement under NAICS code 541519. The Bureau of Reclamation Acquisition and Operation Branch in Denver, Colorado will solicit and award a purchase order, firm fixed price, to Schweitzer Engineering Laboratories. The Government believes that only one responsible source can provide this requirement.

The statutory authority for other than full and open competition is 10 U.S.C. 2304(c)(1), only one source and no other supplies or services will satisfy agency requirements. If firms believe they have the technical capability to meet this need, submit a technical capability statement along with business profile to Rhonda Ligon at rligon@usbr.gov within five (5) days of this notice. Any information received will be treated as market research information towards future similar or same requirements. Quotations or proposals received in response to this notice will not be accepted since this notice is not a request for proposal.

SOW TPP G-20 ANNUNCIATOR UPGRADE

TPP is requesting materials to upgrade G-20’s annunciator and spare parts to be shelved. These items will replace the currently installed equipment that is obsolete. These new items offer a more reliable user-friendly system.

The following items have been approved by engineering to be installed any other product shall require engineering approval.

Specifications:

Qty- 2 – SEL-3555 RTAC (Real time automation controller):

1. Configuration # 3555#1BEC

2. Meets or exceeds IEEE 1613

3. Withstands vibration

4. Withstands Electrical surges

5. Withstands fast transients

6. Withstands extreme temperatures

7. SCADA communication capable

8. IEC 61850 integration is standard

9. Programmable logic is standard

10. Condition monitor of equipment the RTAC is monitoring

Qty- 5 – SEL-2523 Annuciator Panels

1. Configuration # 252301H33A0A1XX

2. Provides 42 inputs, 11 outputs

3. Standard 4 communication ports DNP3, Modbus and SEL protocols.

4. Built in sequence of events recorder simplifies commissioning and troubleshooting.

5. Individually labeled columns and rows for easy identification

6. LED’s light up the window

7. Silence, acknowledge, reset, and push to test buttons are standard

8. Front EIA-232 OR EIA 485 Serial Communication Card port for easy access to settings and status.

9. Capable of setting 36 individual alarm points per panel.

10. Horizontal Rack Mount

QTY- 2 – SEL-2240 AXION Node Digital Input card:

Configuration # 2240#HCK4

1. Digital Inputs (9x24DI)

2. High Speed and High Accuracy DC analog control

3. Synchronized current and voltage measurement

Qty- 2 – SEL-2240 Axion Node Digital Output:

1. Configuration # 2240#XNVM

2. Digital Outputs (9x16DO)

3. High Speed and High Accuracy DC analog control

4. Synchronized current and voltage measurement

Qty- 2 – SEL-2244 Wetting Voltage jumper kit:

1. SEL P/N 915900240

2. Twenty – 4-prong jumpers also known as a comb jumper

3. Is made of copper bar with 4 prongs to reduce 2 wire crimp jumpers.

4. Fits easily in euro style pluggable connectors.

Qty- 3 – SEL-751 Feeder Protection Relay with Digital Input, Digital Output:

1. Configuration # 751#M86X

2. P/N 751001A2C4A5X85AC01

3. Protects distribution circuits from overcurrent, directional overcurrent, autoreclosing, over-

/undervoltage, frequency.

4. Capable to operate in harsh environments -40 degrees to +85 degree Celsius, vibration, and electromagnetic compatibility.

Qty- 20 - 32 conductor wiring harness with pre-installed I/O board terminal plugs @ 20’:

1. SEL – P/N 91590187

2. 32 conductors bundled together and terminated on euro style pluggable connectors on one end.