140R6022R0012_Amendment_0002_0002.pdf

(x)

140R6022R0012 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Billings MT 59107

R60

PO Box 36900 Regional Office Great Plains Region Bureau of Reclamation

08/30/20220002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

08/30/2022

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Stormy Gallagher

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Amendment 0002: Changes to section 3.0 TASKS are hereby incorporated into Solicitation 140R6022R0012 Hazard Fuel Reduction - Eastern Red Cedar Tree Removal, Lake Thunderbird State Park, Norman Project, Cleveland County, Oklahoma.

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

Hazard Fuel Reduction - Eastern Red Cedar Tree Removal Lake Thunderbird State Park Norman Project, Oklahoma Solicitation No.140R6022R0012

3.0 TASKS - The contractor shall perform the following tasks:

1. Masticate all Eastern Red Cedars in designated areas, as shown on the attached drawing.

A. All equipment must be inspected and cleaned in accordance with Inspection and

Cleaning Manual for Equipment and Vehicles to Prevent the Spread of Invasive Species (Technical memorandum No. 86-68220-07-05) 2012 Edition before entrance to Federal property.

B. Single grouser steel tracks are not permitted. Double and triple grouser steel tracks, rubber tracks, and rubber tires are acceptable.

C. Areas within 50 feet of a trail, road, mowed area, or other facility:

1. Ruts more than 4-inches deep or other excessive ground disturbance, as determined by the Quality Assurance Evaluator (QAE), shall be smoothed out and/or filled in.

2. Shred trees into mulch with individual pieces having a maximum 24-inch longest dimension and a maximum 2-inch shortest dimension.

3. Trails, roads, mowed areas, and other facilities shall be clear of any fallen limbs, trees, or other debris larger than listed above.

D. Areas more than 50 feet from of a trail, road, mowed area, or other facility:

1. Ruts more than 6-inches deep or other excessive ground disturbance, as determined by the Quality Assurance Evaluator (QAE), shall be smoothed out and/or filled in.

2. Shred trees into mulch with individual pieces having a maximum 36-inch longest dimension and a maximum 4-inch shortest dimension.

E. All masticated material shall be spread to a depth of no more than 6 inches.

F. All stumps shall be cut flush with the ground surface; removal below the ground surface is not required.

G. Avoid removing other tree species larger than 6-inch diameter at breast height..

H. Work shall not be performed using equipment which will up-root trees.

2. Manually lop and scatter all eastern red cedars in areas where topography or tree density prohibits the use of machinery.

A. All stumps shall be cut flush with the ground surface; removal below the ground surface is not required.

B. The slash, cut down cedars, associated with the lop and scatter shall not exceed a vertical height of 18 inches and maximum length 24 inches.