Attachment_3_-_Questions___Answers_0001.pdf
PDF 77 KB Posted
- Attached to
- Stainless-Steel Shafts - 242 Wellfield Project
- Solicitation number
- 140R3024Q0071
About this file
This document contains Questions and Answers related to a federal contract opportunity for Stainless-Steel Shafts for the 242 Wellfield Project at the Yuma Area Office of the Bureau of Reclamation, a civilian agency.
The key details are:
- The shafts are round with no keyways required.
- The sleeves are 1.877" in outside diameter and 6" long, made of 316 stainless steel.
- The Trade Agreements clause (FAR 52.225-5) applies, but DFARS is not applicable as this is not a Department of Defense contract.
- Drawings and pictures of the required couplings and sleeves have been provided in an amendment to the solicitation.
- The 1.87" dimension refers to the inside diameter of the sleeves, not the outside diameter as initially asked.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A achment 3
Ques on: Do any of these sha s need to include keyways, or are they just plain round?
Answer: The sha s are round and no keyway.
Ques on: Can you please advise more about the 316 sleeve? Do you have any prints that you can supply with tolerance and finish requirements?
Answer: The sleeves are 1.877” in Outside Diameter and 6” long.
Ques on: Do you have country of origin restric ons can you use DFAR material or has to be domes c?
Answer: DFAR is not applicable as we are not Department of Defense. FAR 52.225‐5 Trade
Agreements is applicable for this requirement. See Page C‐7 of the solicita on, if you need the full text refer to www.acquisi on.gov/far.
Ques on: I would need some addi onal informa on for the couplings and sleeves you are reques ng to iden fy them. There are several different styles of both the couplings and sha collars (solid, 2 piece split, 3 piece split, etc.). Do you have any drawings or pictures/dimensions of the parts you are looking for?
Answer: Pictures are included in this Amendment.
Ques on: “I have a quick ques on about the dimension of the sleeves for the sha s on the descrip on it men ons (1.87” – 1 7/8” – 316 stainless steel). I’m assuming 1.87” is the outside diameter and the 1
7/8” is the length correct?”
Answer: The 1.87” is the Inside Diameter of the sleeves and the 1 7/8” is the Outside Diameter of the sleeve.
File details come from the government source that posted it. Updated .