Sol_140R1724Q0034_Amd_0003.pdf

(x)

140R1724Q0034 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

R17

Grand Coulee WA 99133 PO Box 620, MS-7810 Bureau of Reclamation, CPN

06/05/20240003

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

05/23/2024

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

THE PURPOSE OF THIS AMENDMENT #0003 IS TO CHANGE THE PART NUMBER AND DESCRIPTION OF CLIN

040 AND EXTEND THE RFQ CLOSING DATE AS FOLLOWS:

FROM: Part # 4210LED-50, Directional Wide Area lights with Magnetic Mount, LED Bulbs, 50

ft. Electric Cable.

TO: PART # 4210LED-25, Directional Wide Area lights with Magnetic Mount, LED Bulbs, 25 ft.

Electric Cable.

EXTENDED CLOSING DATE FROM JUNE 05, 2024, TO JUNE 10, 2024, PACIFIC DAYLIGHT TIME: 5:00 PM

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Paula Gross

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R1724Q0034/0003

ALL OTHER TERMS AND CONDITIONS REMAINS IN FULL

FORCE AND EFFECT.

Change Item 00040 to read as follows(amount shown is the total amount):

VENDOR SHALL PROVIDE PART NUMBER/DESCRIPTION AND

PRODUCT LITERATURE OF PROPOSED ITEM. THIS

REQUIREMENT IS TO BE QUOTED FOB DESTINATION.

VENDOR SHALL SUBMIT PRICING ON A SYSTEM GENERATED

QUOTE LISTING EACH LINE-ITEM, BRAND NAME, PART

NUMBER, QUANTITY, UNIT PRICE AND TOTAL COST FOR

EACH LINE WITH A GRAND TOTAL VIA EMAIL TO LAVERNA

HARDING AT LHARDING@USBR.GOV.

00040 Portable LED Light fixture with magnetic mounts, 10 EA

LED Bulb, 25 ft. Electric Cable.

Vibration/ Impact resistant

Remains cool to the touch during operation

-Emitter Type: LED (PAR 38 LED Lamp)

-Light Output: 2000 Lumens (1 PAR 38 LED lamp)

-Brightness @ 48": 1970 LUX @ 41" Diameter (1

PAR 38 LED Lamp)

-Color Temperature: 5600K

-Power Consumption: 25 Watts (1 PAR 38 LED

Lamps)

-Voltage Versatile: 12 to 24 Volts AC/DC or 115

Volts AC

-Body: polyurethane - must be rust and corrosion resistant, easily cleaned and easily decontaminated.

-Dimensions: Length 12", Width 6 1/2", Height 6

1/2"

-Weight: 8-1/14 lbs.

-Suitable for use in: -25° to +120° ambient temperature

-Power Cord: 25 ft. electric cable

-Mounting: 150 lbs. pull industrial magnet.

Western Technology Part #4210LED-25 or Equal

***NOTE*** - THIS ITEM MUST BE COMPATIBLE WITH

THE PORTABLE WORKLIGHT SYSTEM CURRENTLY IN USE:

WESTERN TECHNOLOGY LINKALIGHT 4400GEN2

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110