Sol_140R1724Q0025_Amd_0001.pdf

(x)

140R1724Q0025 x x copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

R17

Grand Coulee WA 99133 Hwy 155, PO Box 620 P-NW Region / Acquisition Group Bureau of Reclamation

03/20/20240001

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

03/07/2024

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Liquid Cooled Inductive Heating System

Clearly identify your products item by brand name if any, make or model number and include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information.

The purpose of this amendment is to answer questions.

Question #1: Basically, it looks like you are trying to Shrink Fit the part onto a shaft.

Answer #1: That is correct.

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Terry Mest

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R1724Q0025/0001

Question #2: You are asking about insulating or placing a heating blanket on top of the coil. Are you or your client worried about the potential low temperatures?

Answer #2: Perhaps "preheat induction blanket" would have been better wording here. The intent of the blanket is to contain the heating coils.

Question #3: You mention a high temperature rope.

What exactly are you looking for here?

Answer #3: A rope that can withstand the highest temperatures this system will produce - the rope cannot ever melt, burn or disintegrate. Intent is to use rope to wrap/strap the blanket(s) around the part during heating as some surfaces to be heated are vertical.

Question #4: Will you be preforming the work in a warehouse or in the field?

Answer #4: Work will be performed indoors at the

John W. Keyes III Pumping-Generating Plant.

Question #5: Would you happen to know the temperature range the Induction System will be working in?

Answer #5: Ambient temperature will range anywhere between 40°F and 100°F.

Question #6: You mention a cart or wheeled running gear. We just supply the Induction

System. Are you wanting something to be used in the field?

Answer #6: The liquid-cooled inductive heating system shall include a cart or wheeled running gear per the specification. Intent is that the entire system shall fit on/in the cart.

Question #7: Question: You sent 4 pictures of 4 different parts, could you please identify what areas of these parts you wish to heat, to what temperature and in what time frame?

Answer #7: Each entire assembly/part shown needs to be heated to 200°F throughout within 2 hrs.

However, not all 4 assemblies need to be heated at the same time.

All other terms and conditions remain the same.

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110