Sol_140R1722Q0012_Amd_0002.pdf

(x)

140R1722Q0012 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

Grand Coulee WA 99133

R17

Hwy 155, PO Box 620 Grand Coulee Acquisition Group Pacific Northwest Region Bureau of Reclamation

03/09/20220002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

02/24/2022

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

THE PURPOSE OF THIS AMENDMENT IS TO REVISE THE PRODUCT LONG DESCRIPTION AND EXTEND THE RFQ

CLOSING DATE AS FOLLOWS:

A. CLIN 10 LONG DESCRIPTION IS CORRECTED TO REFELCT THE 274SC SYTLE NUMBER

B. CLOSING DATE EXTENDED FROM MARCH 11, 2022 TO MARCH 18, 2022 PACIFIC DAYLIGHT TIME: 5:00

PM

ALL OTHER TERMS AND CONDITIONS REMAINS IN FULL FORCE AND EFFECT.

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Paula Gross

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 3

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R1722Q0012/0002

Change Item 00010 to read as follows(amount shown is the obligated amount):

VENDOR SHALL PROVIDE PART NUMBER/DESCRIPTION AND

PRODUCT LITERATURE OF PROPOSED ITEM. THIS

REQUIREMENT IS TO BE QUOTED FOB DESTINATION.

VENDOR SHALL SUBMIT A QUOTE ON SF 1449 VIA EMAIL

TO LAVERNA HARDING AT LHARDING@USBR.GOV

00010 PACKING, TRAPEZOIDAL, 1-1/4 IN X 50 LFT, 8 EA

Anti-Keystone

- Unit packing Box Size: 88 inch ID, 90.5 inch

OD, 5 split packing rings tall plus lantern ring.

- The Unit shaft sleeve has an 88 inches nominal diameter and a shaft speed of 72 RPM which yields approximately a 1,660 fpm continuous surface speed seen by the packing with momentary maximums of 3,320 fpm under abnormal conditions.

- The installed packing shall provide a labyrinth seal configuration: The specific cross sectional design of the packing shall be a six-sided configuration that incorporates a rectangle mated to a trapezoid. The trapezoidal side of the packing shall be placed towards the shaft, so when wrapped around the shaft shall form a "closer" to rectangular cross section.

- The packing shall suffer no degradation when exposed to continuous delta pressures of 500 psi on a rotating shaft.

- The packing shall suffer no degradation when continuously exposed to a temperature of up to

400°F.

- The packing shall suffer no degradation when exposed an environment with a pH from 5 to 10.

- The packing shall be designed to handle high vibration, out of round, and impact events without degradation.

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 3

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R1722Q0012/0002

- The packing sectional weave shall act to inhibit rupture and extrusion.

- The packing shall incorporate an expanded

TFE/graphite material as the primary sealing yarn with two diagonally braided anti-extrusion corners of meta-aramid yarn and linear resilient elastomeric silicon cores.

- The packing shall have overall cross sectional dimensions of 1 ¼ inches x 1 ¼ inches.

- The packing shall be delivered on a spool containing 50 lineal feet of material per spool.

NEW ENGLAND BRAIDING COMPANY, Style 274-SC AKII

Vibradamp Packing, OR EQUAL

Product/Service Code: 5330

Product/Service Description: PACKING AND GASKET

MATERIALS

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110