A06_Specifications.pdf

Glacier Bay National Park and Preserve

1 Park Road Gustavus, AK 99826

NATIONAL PARK SERVICE

REGION 11 ALASKA

National Park Service, Glacier Bay National Park & Preserve, Technical Specifications Attachment

1. General Description of Needed Equipment: Gas Utility Vehicle (UV). Bobcat UV34XL is known to meet specifications, and expected others. To qualify for consideration, each of the following characteristics (Sections 2.1 thru 4) shall be met or bettered. Package to be delivered to Glacier Bay National Park, Gustavus Alaska.

2. Equipment Characteristics:

2.1. UV dimensions:

2.1.1. Length 155” approximate

2.1.2. Width: 64” maximum approximate

2.1.3. Height: 78” maximum (not including strobe) approximate

2.1.4. Rated weight capacity: 2075 lbs. approximate

2.1.5. Ground clearance: 11.7” approximate

2.1.6. Turning radius: 154” maximum

2.1.7. Cargo bed: L43.5” xW54” xD11.5” approximate Composite Cargo Box w/ Cylinder Lift

Assist, Quick Latch Tailgate w/ Single Latch, Integrated Box Accessory System, Cargo bed capacity: 1250 lbs approximate Cargo bed, load height 38” approximate. Cargo bed to come with power tilt fully rated for bed capacity with controls in the cab.

2.1.8. Tires: 26x10-12 All terrain 8ply approximate

2.1.9. Receiver Hitch: 2” tongue weight rating 250 lbs. approximate

2.2. UV engine/performance:

2.2.1. Gas EFI

2.2.2. Horsepower: 40hp approximate

2.2.3. Liquid cooled

2.2.4. Speed: 35 mph High/ 25 mph low minimums

2.2.5. Fuel tank: 11 gallon minimum

2.2.6. Engine Protection Oil Pressure & Water Temp

2.2.7. High capacity air filter

2.2.8. Transmission: Continuous Variable Transmission CVT with two Range (H/L), Integrated transmission Park (P)

2.2.9. Towing capacity: 2500lbs approximate

2.2.10. 4-wheel drive with independent suspension

2.2.11. Steering: Rack and Pinion with electric power assist

2.2.12. 4 Wheel, Hydraulic Disc brakes with Dual Bore

2.2.13. On the Fly all wheel drive

2.3. UV electrical:

2.3.1. 575 CCA Battery approximate

2.3.2. 75 Amp/900W Stator approximate

2.3.3. USB port and 12-volt power outlet in cab

2.3.4. LCD instrument display with: Speedometer, Engine Temp, Engine RPM, Volt, Trip and Hour Meter, Tachometer, Fuel Level, Clock, Drive Mode, Odometer, Service Reminder and Gear Position

2.3.5. Roof Light Harness

2.3.6. 6 outlet accessory bar

2.3.7. LED work lights 2 front, 2 rear

2.3.8. LED DOT required lights to include headlights, taillights, turn signals, and flashers.

2.4. UV safety:

2.4.1. Roll over protect system (ROPS) with three point retractable seat belts

2.4.2. Rear window guard

2.4.3. Climate control Heat

2.4.4. Horn

2.4.5. Backup alarm

2.4.6. Rearview and side mirrors

2.4.7. Windshield wipers

2.4.8. Strobe light-Amber

2.4.9. Full chassis skid plates

2.5. UV Operator compartment:

2.5.1. Rigid poly fully enclosed insulated cab

2.5.2. Lockable doors with roll down windows

2.5.3. Front and rear windshields

2.5.4. Window defogger

2.5.5. Tilt steering wheel

2.5.6. Cup holders-4

2.5.7. Two 60/40 bench seats for 6 occupants total

2.5.8. Under Seat, Upper/Lower Dash Storage, Sealed Glove Box Storage

*Machine to come turnkey and ready to operate all attachments

3. Manuals: Two copies each of operator’s, service, and parts manuals for Utility Work Machine as well as attachments shall be shipped to the delivery address at the time of purchase.

4. Warranty:

Manufacturer’s full coverage on the following:

Engine

• Water/coolant temp sensor

• Water pump

• Valves

• Valve spring

• Valve seat/insert

• Valve guide

• Valve cover & gasket

• Timing/accessory gears

• Timing position sensor

• Timing gear housing

• Throttle valve & body

• Thermostat

• Starter

• Rocker shaft assembly

• Rocker arm

• Radiator

• Rack/control shaft

• Push rod

• Pulleys

• Piston rings

• Piston

• Output Shaft

• Muffler

• Mass air flow & temp sensor

• Intake manifold & gasket

• Intake Manifold

• Intake air heater

• Inlet/exhaust valve

• Hoses/lines & fittings

• Fuel transfer pump

• Fuel tank(s)

• Fuel shutoff solenoid

• Fuel pressure sensor

• Fuel Line

• Fuel injector

• Fuel injection pump

• Fuel injection lines

• Fuel cooler

• Front & rear cover

• Flywheel & ring gear

• Fan

• Exhaust manifold & gasket

• Exhaust combustion lines

• Engine speed sensor

• Engine oil pump

• Engine oil pressure sensor

• Engine oil pan & gasket

• Engine oil filter housing/base

• Engine oil cooler

• Engine mounts

• Engine block

• Electronic control unit (ECU)

• Cylinder head gasket

• Cylinder head

• Crankshaft rear seal

• Crankshaft main & rod bearings

• Crankshaft gear

• Crankshaft front seal

• Crankshaft damper/pulley

• Crankshaft

• Crankcase relief valve

• CrankCase

• Coupler

• Coolant reservoir

• Connecting rod bearing

• Connecting rod

• Camshaft roller/follower/lifter

• Camshaft housing assembly

• Camshaft gear

• Camshaft Chain

• Camshaft bearing

• Camshaft

• Alternator

• Air temp & pressure sensors

• Air cleaner

• Engine wiring harness

Differential/Transmission

• Transmission case & components within

• Transaxle

• Shift & control linkage

• Sheave assembly

• Reduction gear box

• Rear differential

• Prop shaft assembly

• Power steering assembly

• Master cylinder

• Levers & pedals

• Hub/gear assembly

• Gearcase

• Front differential

• Final drive assembly

• Enclosed oil immersed chains & sprockets

• Drive shift fork & rod

• Drive shaft boot

• Drive shaft assembly

• Drive shaft & universal joints

• Drive clutch assembly

• Drive belt tensioner assembly

• Drive belt

• Drive axle

• Differential pinion gear/ ring gear

• Differential housing

• Clutch components

• Chain case assemby

• Brake system

• Boot plunging

• Bevel gear, case, shaft & bearings

• Axle shaft & bearings

• Axle seals

• Axle housing assembly

• Axle

• AWD/rear differential switch

• Rotors

• Brake proportioning valve

HVAC Components

• Receiver dryer

• Motors

• Hoses/seals/gaskets

• Hoses/fittings

• Heater core

• Fan

• Evaporator

• Ducts

• Condenser

• Compressor

• Coils

• Clutch & pulley

• Compressor

• Condenser

• Harness

Mainframe Components

• Suspension/shocks

• Subframe

• Steering wheel

• Steering tilt assembly

• Steering shaft

• Stabilizer bar

• Skid plate

• Seat belt

• Seat

• Main frame

• Isolator mount

• Hood

• Heat sheild

• Floorboard(s)

• Fenders/flares

• Fascia

• Door & cover assembly

• Dash

• Cargo box lift assembly

• Cargo box - shock

• Cargo box

• Cab frame

• Bumper (s)

• Battery mount

• A-arm(s)

Electrical Components

• Wiring harness specific to engine controls

• Windshield wiper motor & assembly

• Terminal block

• Switches

• Speed limiter module

• Horn

• Headight/tail light assembly(s)

• Harness

• Gauge cluster

• 12 volt receptacle

• Rear lighting wiring harness

• Main wiring harness

Other Components

• Tie rods

• Throttle/brake pedal(s)

• Steering column & wheel

• Gas shock

• Front/rear window

• Ball joints

Warranty period shall be no less than five (5) years or 60 months. Units to be factory tested to design specifications at full load conditions and all protective devices and control functions simulated and checked. All warranties to be performed by manufacturers certified technician using OEM parts. Manufacturers certified technician to be located no more than 100 miles from delivery address, due to remote customer location.

5. Shipping and Delivery:

Entire package shall be prepped for barge or overland shipment. Complete FOB shipping address shall be to: The National Park Service, Glacier Bay National Park, 1 Park Road, Gustavus AK 99826.

FOB Delivery shall be completed no later than July 30, 2024.