B08_Solicitation_Attachment_1_Specifications.docx

Utility Work Machine Jewel Cave National Monument has a requirement for (1) Brand Name or Equal Bobcat Toolcat and associated attachment equipment. The vendor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor, or authorized reseller for the proposed equipment such that the OEM warranty and service are provided and maintained by the OEM.

The specifications for this piece of equipment (UW56) and the associated attachment equipment identified in this requirement are for maintenance use at Jewel Cave National Monument. Each of these specifications should be met as a minimum requirement. The new Toolcat is essential to Park operations, and it is a versatile piece of equipment that can be used on state highways and park roads. The equipment is used to transport two park personnel for highway work and back country work. The picture below shows the existing Toolcat with 970 hours and the various attachments that will be used for trade in value to an authorized reseller of the equipment proposed and can provide a factory warranty.

FOB destination to: Jewel Cave National Monument 11149 US Highway 16 Custer, SD 57730

Delivery within 60-90 days ARO. The trade-in Toolcat will be required to be picked-up when the new Toolcat is delivered.

Trade in Equipment

· 2014 4x4 Toolcat 5600 (968 hrs)

· 2014 Bobcat snowblower SB200 X66

· Pallet Fork. Year unknown. Operational

· John Deere worksite Pro Plow BL7. Year unknown. Operational

· Utility bucket KV22801. Year unknown. Operational

· 2014 tilt-tach Oscillating coupler

· 2014 68” GP Bucket with teeth

Pictures Below

Description/Salient Characteristics

· 2 Seats

· Keyless start

· All-Wheel Steer

· Automatically Activated Glow Plugs

· Auxiliary Hydraulics Variable Flow with dual direction detent Beverage Holders 7 pin attachment control kit

Operator Canopy includes Front Window, Rear Window , Front Wipers, and Electrical Power Port Totally enclosed cab wit AC and Heat Dome light Parking Brake, automatic Power Steering with Tilt Steering Rear Receiver Hitch Seat Belts, Shoulder Harness Interlock Control System (TICS)

Suspension/Transmission 4-wheel independent Tires: 29 x 10.5, 8 PR Trac Tires (in lieu of std tires) Traction Control Two-Speed Transmission Limited Slip Transaxle Full-time Four-Wheel Drive

Engine

· Liquid

· Emissions Tier (EPA) Tier 4

· Diesel Fuel

· Horsepower 61HP

· Turbocharged

· Engine Block Heater

· Lower Engine Guard

· Engine and Hydraulic Monitor with Shutdown

Performance Operating Weight 5680 lbs Travel Speed – High 16.5 mph Travel Speed – Low 8 mph Travel Speed Reverse – 8 mph Machine rated capacity – 2200 lbs

Capacities Fuel Tank – 20 gal Cargo Box Length – 56 in Cargo Box Width – 51 in Cargo Box Load – 2000 lbs Cargo Box Height – 10 in Total Vehicle Rated Capacity – 4200 lbs

Hydraulic System Auxiliary Std Flow – 18.8 GPM Auxiliary Pressure – 3000 psi Auxiliary High Flow – 27.9 GPM

Dimension Length – 172.1 in Width – 60 in Height – 81 in Cargo Box Volume 16.5 Cubic ft Ground Clearance – 8 in Turning Radius (AWS Mode) – 50.5 in Outside Turning Diameter – 210 in

· Hydraulic Dump Box

· Instrumentation:

Hour meter, Job Hours, Speedometer, Tachometer, Fuel Guage, Engine Temperature Gauge, and Warning lights

Bob-Tach Boom Float Cargo Box Support Cruise Control Joystick, Manually Controlled with Lift Arm Float Radiator Screen Spark Arrestor Muffler Front Work Light

Road Package/Safety

· Backup Alarm

· Turn Signals

· Flashers

· Side Mirrors

· Rear work Lights

· Headlights

· Back up Camera

· Taillights

· Brake Lights

· Rear View Mirror

· Strobe light

· Rear window guard

· Rollover protective Structure/ Falling Object Protective Structure

Required Attachments

· 68" Heavy Duty Bucket with Bolt on 68” cutting edge

· 68" Heavy Duty Bucket with Bolt on teeth

· Tilt Tach oscillating coupler accessory

· 20 PH Auger Drive Unit and Auger mounting Frame Kit

· 66” Brush Cutter (high flow)

· 62” Combination Bucket

· 62” Rock Bucket

· 68”Industrial Grapple

· 72”Landplane

· 48” Heavy Duty pallet Fork with hydraulically adjustable forks

· 72” hydraulic snow blade

· Chipper, Standard flow

· 72’ rear discharge mower

· 32x60 snow blower

· Skidsteer E-Z digger Backhoe Attachment with swing arm. 7’ depth capacity, 8” and 12” bucket.

END OF SPECIFICATIONS

image1.jpeg image2.png image3.jpeg