Attachment01_Specifications.pdf

SPECIFICATIONS

UTILITY WORK MACHINE, BOBCAT TOOLCAT UW 53, BRAND NAME OR EQUAL

Lincoln Boyhood National Memorial

Lincoln Boyhood National Memorial (LIBO) has a requirement for a utility work machine, Bobcat Toolcat UW53, brand name or equal. Utility work machine must be no wider than 60 inches, have two seats, a hydraulic dump bed, a trailer hitch, 4-wheel drive and all-wheel steering. This requirement includes the trade in of a 2010 4X4 Kawasaki Mule Utility vehicle. The value of the trade in is $4,500.00.

MINIMUM SPECIFICATIONS:

• Horsepower requirements: 61 HP Tier 4 Diesel engine

• Transmission Two speed

• Travel speed Two speed

• Auxiliary hydraulic Variable flow with dual direction detent

• Hydraulics High Flow and attachment control kit

• Steering modes AWS mode

• Steering power with tilt steering wheel

• Air intake heater Automatic activated

• Tires Standard tires 27 x 10.5-15 (8 ply), lug thread.

• Cab Enclosed Operator Cab w/ HVAC

• Cab Heat and Air conditioning

• Cab Front window, rear window, front wipers

• Seat Adjustable vinyl Seats, suspension

• ROPS Meets SAE J1040 &ISO3471

• FOPS Meets SAE j1043 & ISO 3449 Level 1

• Lights Back-up alarm, turn signals, flashers, taillights, brake lights, rear view mirror, side mirrors, horn, two LED rear work lights, and headlights

• Parking brake Automatic

• Bucket positioning Hydraulic

• Instrumentation Standard 5” Display with keyless start, temperature and fuel gauges, hour meter, engine temperature, RPM and warning indicators including maintenance interval notification, fault display, job codes, quick start, and security lockouts.

• Lift path Vertical

• Controls Joystick, manually controlled with lift arm float.

• PTO Package rear PTO-540 RPM, PTO shield, PTO tachometer

• Hitch Package three-point, depth position gauge, rear receiver hitch

• Rear remote package one set of poppet-style couplers, for use with implement hydraulics

• Suspension 4-wheel independent

• Bucket 62-inch combination bucket with port relief and hose assembly (57-inch attachment plus)

• Attachment 84” Angle Broom

66” Brush (HF) 66” Ind. Fork grapple with 7 tines 72” mower 90” mower Model 10 Dumping Hopper with mounting bracket Flail Cutter with a minimum of 79” cutting width, minimum cutting height range of 1.5-3” and minimum cutting capacity of brush material up to 3” in diameter Lower Debris guard Soil Conditioner attachment that meets the following minimum requirements Size: 84” hydraulic angle and depth Motor: Hydraulic Capability: High flow with flow range between 30 and 37 gal/minute Auger Drive unit which includes auger mounting frame kit that meets the following minimum requirements: dig depth of 56”, shaft diameter 2” hex, and include the following single flight duty bits, each with 2” hex: 9”, 12”, and 18”

ADDITIONAL ACCESSORY REQUIREMENTS:

Rear view camera, engine block heater, interlock control system, Engine /Hydraulic systems shutdown horn, beacon, Lift arm support, automatically activated glow plugs, power tach, boom float, cowl and cowl support, cruise control, engine and hydraulic monitor with shutdown, full-time four-wheel drive, horsepower management, speed management, heavy duty battery, limited slip transaxle, radiator screen, lower engine cover, spark arrestor muffler, kit hitch adapter, and traction control.

CAB REQUIREMENTS:

Utility work machine cab requirements include adjustable double seat, Dome light, electric power Port, interior trim, front windshield wiper, seat belts with shoulder harness.

Utility work machine must have a Manufacture Warranty minimum 1-year parts and labor, unlimited hours.

Utility work machine engine must have an additional 1-year or total of 2000 hours after initial 1-year warranty.

TRADE IN:

Included in this purchase will be a trade in of a 2010 4X4 Kawasaki Mule Utility vehicle. The value of the trade in is $4,500.00.