Build_Scope_of_Work_and_Specifications.pdf
PDF 518 KB Posted
- Attached to
- SUPPLY, PATROL VESSEL, MOTOR, AND TRAILER, EVER
- Solicitation number
- 140P5424Q0041
About this file
This document appears to be vessel and trailer specifications for a federal contract opportunity. The key details are:
The required vessel is 21-23 feet in length with an aluminum weld or fiberglass/mold construction, vee-hull, bay boat style with a tunnel hull design, center console, and leaning post with backrest. It must have a self-bailing deck, powder coated or stainless grab rails, stainless steel hardware, stainless steel steering with hydraulic steering, dual battery system, and non-skid decking. Required electronics and accessories include a 9-12" Garmin GPS/chart plotter, Garmin Montana InReach communication device, LED navigation and work lights, VHF radio, trim tabs or aux pods, and a 6-foot hydraulic/electric shallow water anchor. The outboard motor must be a four-stroke 35HP or less from Mercury or Yamaha with a four-blade stainless steel prop.
The required trailer must be aluminum with torsion axles, stainless steel hardware, retractable transom tie-down straps, and a spare tire. This requirement is part of Solicitation Number 140P5424Q0041 issued by the Department of the Interior National Park Service Southeast Region for a Patrol Vessel, Motor, and Trailer for Everglades National Park. No additional details on the solicitation timeline or award process are provided.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140P5424Q0041.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Vessel and Trailer Specifications
Delivery Address: Everglades National Park 33100 Tamiami Trail East Ochopee, FL 34141
Vessel/Hull Specifications
• 21’ to 23’ in length
• Aluminum weld construction preferred. Fiberglass/mold construction will be considered.
• Vee-hull, Bay Boat style with tunnel hull design
• Center Console
• Leaning Post with Backrest design for Helm area
• Self-Bailing Deck
• Powder coated or stainless grab rails.
• Stainless steel hardware to include all hinges, fasteners, and rigging.
• Stainless Steel Steering with Tilt
• Hydraulic Steering
• Dual Battery (House/Starter) wired on a dual battery switch.
• Non-Skid texture covered decking.
• Fitted: Boat Cover, Console Cover, Seat Cover and Engine Cover
Electronics/Accessories/Add-ons
• Min 9” Max 12” Garmin GPS/Map o Main GPS/Chart Plotter is to be Installed flush into the helm/center console.
o GPS is to be wired and meshed in a network to accurately provide.
GPS location Updated marine charts for South Florida Atlantic and Gulf Coast waters.
Communicate and display Fuel and Engine Data Wired and updated to provide GPS/Weather data overlay.
• Gimble mounted GPS: Garmin Montana Inreach communication device.
Gimble is wired to provide power to the GPS unit and communicate over the NEMA network.
• Nav Lights and AUX Lights o LED work Lights providing 360 coverage.
o LED work lights wired to provide Forward, Aft, or Side lighting options.
o LED Nav lights,
• VHF Garmin Marine Radio with VHF Antenna. Flush mounted or mounted under/in console with easy access to controls.
• Breaker switch installed to replace any “in-line” fuses that service actuator/solenoid switches for example: (Jack-plate, trim/tilt, Trim Tabs,
• Blade Fuse/buss Terminal used to centralize all other electronics.
Motor/Engine Configuration
• Maximum rated HP for hull design +/-35hp
• Four-stroke powered Outboard. (Mercury or Yamaha)
• Four-Blade Stainless steel performance prop o Spare Stainless-steel prop
• Fly-by-wire throttle/controls
• Trim/tilt
• Min 6” Hydraulic Jack-Plate (Hydraulic Jack-Plate will have an inline breaker installed at the source)
• Trim-Tabs or Aux-Pods per hull design
• (2 each) 6’ Max 4’ Minimum Hydraulic/Electric Powered Shallow water Anchor/Powered
Anchor Pole (utilizing a side-mounted engine bracket port and starboard)
• Inline fuel filter/canister
Vessel Hull Configuration Examples:
Interior Layout: Overhead View
Hull Tunnel Construction View
Transom Sponson View with Jack Plate Option
Hull Forward/Deadrise Profile View:
Starboard Side view with Shallow water anchor option
Port Side view with Shallow Water Anchor Option and outboard
Trailer Configuration
• Aluminum Trailer, with Torson Axles, stainless steel Hardware, Retractable Transom Tie-down straps, Spare wheel/Tire
File details come from the government source that posted it. Updated .