SHEN_Group_1_Plan_Set_2018-01-31.pdf

RESERVED

PARKING

VAN

A C C E S S I B L E

LOOP INSTALLATION IN UNDIVIDED ROADWAY

3' (min)

L

C

3' (min)

3' (min)

3' (min)

Edge of shoulder

Edge of travelway

9"

Edge of travelway

Edge of shoulder

Existing pull box

9"

Proposed pull box

6' (typ)

2" RGS conduit to pull box

5' x 5' loop (typ)

See note 1

Edge of shoulder

1. Install square inductive loop in the center of each lane, with sides perpendicular and parallel to the centerline.

2. For each loop, install the loop wire in one continuous length with no splices.

3. Provide dedicated rigid galvanized steel (RGS) conduits for each lead-in from the edge of pavement to the nearest pull box.

4. Loops shall be placed prior to overlay.

5. Contractor shall connect loops to proposed Type 2 traffic pull box.

NOTES:

SECTION A-A

INDUCTIVE LOOP

SINGLE LOOP PER LANE

N.T.S.

12" solid white striping

8" solid white striping

45°

4" double solid yellow striping

45° t y p y p

12" solid yellow striping

NOTES:

y p

ONE-WAY TWO-LANE TRAFFIC, LANES SEPARATE

TWO-WAY TWO-LANE TRAFFIC, LANES SEPARATE

1.

2.

Install striping in accordance with the

MUTCD, latest edition.

Typical pavement marking widths are shown. Use wider pavement markings when specified in the plans or as directed by the CO.