Hydraulic_Detachable_Gooseneck_Trailer_Vendor_self_evaluation_0001.xlsx

XLSX spreadsheet 12 KB Posted

Attached to
AO# 19028 WCF EQUIP REP LOW-BED I422719
Solicitation number
140L4323Q0196
Issued by

About this file

This document contains a vendor self-evaluation spreadsheet for a hydraulic detachable gooseneck trailer specification. The trailer specifications include an overall length of 46 feet, width of 8 feet 6 inches, gooseneck length of 12 feet, lower deck length of 22 feet and height of 22 inches, rear deck length of 12 feet and height of 42 5/8 inches, and ground clearance of 6 inches. Additional specifications include axle capacities, suspension components, hydraulic gooseneck system, engine and pump details, decking and flooring materials, lighting and electrical systems, and mud flaps.

The related federal contract opportunity is solicitation number 140L4323Q0196 from the Department of the Interior Bureau of Land Management Oregon-Washington for the acquisition of a hydraulic detachable gooseneck low-bed trailer to specification I422719. The vendor self-evaluation spreadsheet allows manufacturers to indicate how their proposed trailer meets or does not meet the required specifications.

View the file

Other files

File Type Posted
Sol_140L4323Q0196_Amd_0001.pdf PDF
Sol_140L4323Q0196.pdf PDF
B08_Solicitation.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Sheet1

Vendor self evaluation of specifications/requirementsMeets Req/Spec?Comments
Hydraulic Detachable Gooseneck Trailer specification/requirementsYes/NoIf no, what is offered?
Trailer
The overall length of the trailer shall not exceed 46’
The width of the trailer shall not exceed 8’6”
Goose neck length 12’
Lower Deck length 22’
Lower deck height 22” Loaded.
Rear Deck length 12’
Rear deck height 42 5/8”
Ground clearance 6”
V-shaped guide for hooking gooseneck up with an air activated self-locking pin.
13 HP Gas engine & Pump
Main Deck
Main beam 16” T-1 Steel
Centers 40”
Side Rails 16” T-1 Steel
Crossmembers 10” & 4”
Spacing 12”
Out riggers 15 on each side
13 bent style D rings on each side
Front ramps made of steel 22” x 41” with a weight rating of 30k lbs
Concentrated load of 80000 lbs in 12’
Rear Deck
Riser (3:1) 18° slope on transition
2 D rings on each side
Full depth boom trough in boom area with knuckle trough at rear deck
Decking / Flooring
Main Deck 1.75” Apitong
Steel Wheel covers
Boom and Bucket well
Electrical
LED lights
7 pole electrical connector
3 tail lights per side
Remote flashers with a battery backup
2, 4” rear strobes for over size load
Axles Suspension & Running Gear
2, 25,000 lbs capacity Axles
Air ride suspension with dump valve located on driver side between axles
Axle Spacing of 49”
16 ½” x 7” – 25,000lbs Brakes
2S1M ABS
Axle #1 Fixed type 30/30 Non- ABS
Axle #2 Fixed Type 30/30 ABS
Automatic slack adjusters
Spring Brakes
Hub Piloted drums with steel wheels
Hub meter
Gooseneck
12’ Gooseneck length
Fixed King pin style
16” King pin setting
Hydraulic gooseneck support arm
98” Swing Clearance
5th Wheel height 50”
2” King pin
Have a 5 position ride height
13 HP Gas Engine & Pump mounted in neck with engine controls mounted on driver side exterior side of trailer
Pump controls to mounted within same area as engine controls on exterior of neck
Finish
Sand blasted and powder coated Black
Mud flaps & DOT approved reflective taping
Flag holders for over size load at front and rear of trailer both sides
Over size load sign bracket at rear of trailer on top of rear deck at the very back
Additional
6 bent style D rings on rear deck (2 at the riser, 2 at the start of rear deck, and 2 on top of bumper)

File details come from the government source that posted it. Updated .