A06_BPA_Call_Samples_SNDO_2024_Vehicles.pdf

Statement of Work: Law enforcement vehicles (3) equipment de-installation, installation, outfitting of new law enforcement vehicles.

Date Submitted 2/2024

Vehicle: (3) 2023 Ford F150 FX4 Govt. Plate(s): N/A VIN(s): 1GNSKLEDXNR239520/ Awaiting VIN (both vehicles are being manufactured)

Notes on equipment for installations:

The equipment needed for installation will be a combination of new and reused parts.

Items that are serviceable will be reused, but there may be an unforeseen possibility that some of these items will not work with the new vehicle or are found to be in disrepair once they are removed from the old vehicle. Quotes are not required to reflect this possibility.

The BLM will be responsible for the cost of a new part above and beyond the initial quote if any part is found to be unusable at the time of installation. However, the vendor will be required to notify the BLM of any unusable part, suggested replacement part, and obtain approval before purchase and installation.

For all new parts needed to complete the installation, the vendor must include manufacturer, model, and itemized price of equipment in the quote. All new parts must meet the below set standards or specific make or model as noted or be equivalent. The BLM has the right to disqualify any part that is deemed not comparable or found to be unsatisfactory.

Work should start approximately around 3/25/2024 and end around 5/25/2024. Current orders on supplier parts is approximately a 45 – 60 day lead time. Start and completion dates will allow for delivery of requested equipment before installation. Vehicle start to completion times should not take more than 3 weeks per vehicle.

Outfitter will allow for BLM input on equipment location preference during installation.

I. STRIP EXISTING VEHICLE(s) OF LAW ENFORCEMENT EQUIPMENT (2) 2017

Ford F150s and (1) 2017 Ford Expedition :

1. Plug roof and body holes/ Remove Decals & Glue

2. Ensure all OEM equipment and lighting are functioning

3. Strip all law enforcement (Non-OEM) parts from truck

4. Retain all useful parts for install into new vehicle

5. All parts not re-used will be returned to BLM

II. OUTFIT OF NEW PATROL VEHICLE – (3) 2023 Ford F150s:

1x ETH SERIES HEADLIGHT FLASHER MODULE 2x 100 WATT SIREN SPEAKER WITH BRACKET 1x PUSH BUMPER WITH FRONT AND SIDE SPLIT LED

1x OFF ROAD LED BAR ON PUSH BUMPER 1x A PILAR LED SPOTLIGHT 1x NXT NF 48 INCH TRI COLOR FLAGSHIP BAR WITH 24 1x LED CORNERS AND 12 LED MODS 1x SIDE FACING LED LIGHTS MOUNTED AT REAR VIEW MIRRORS 1x 22 INCH 7&15 SLOPED COMMAND CONSOLE 1x TROY CONSOLE BASE 1x DUAL CUP HOLDER CONSOLE 4 IN. FP 1x STORAGE TRAY 3.5 DEEP BY 6 IN FP 1x SIREN/LIGHT CONTROLLER 1 PIECE DUAL AMP 1x HANDSFREE SIREN CONTROL IN STEERING WHEEL 1x AXON CAMERA TRIGGER MODULE 1x MOTO APX RADIO REMOTE HEAD 1x RADIO COAX NMO, RF CONN, HIGH PWR ANTENNA 1x SAT-RAD RADIO SYSTEM MOUNTED WITH MAGNET PLATE 1x RED/WHITE TACTICAL LED DOME LIGHT WITH DUAL

SWITCH

1x TRIPLE DC OUTLET BOX WITH 4 USB PORTS 1x STINGER 2020 BASE & DC CHARGER 1x HEAVY DUTY COMPUTER MOUNT WITH, 204 SIDE

MOUNT, 303 SWING ARM, 202 TILT AND SWIVEL

1x ADVANCED PORT DOCKING STATION 15044 FOR

LAPTOP COMPUTER

1x RADAR SYSTEM FRONT AND REAR (direct to dash/ pillar mount on antennas) 1x SINGLE PERSON PRISONER CAGE TRUCK/SUV WITH REAR WINDOW PROTECTION 1x RED/WHITE TACTICAL LED DOME LIGHT WITH DUAL

SWITCH IN CAGE

1x STEEL VERTICAL WINDOW BARS FOR CAGE 1x BLAC-RAC STANDARD AR-15 HIGH SECURITY MOUNT 1x BLAC-RAC REMINGTON 870 HIGH SECURITY MOUNT 1x FLASHER FOR REVERSE/BRAKE 1x LED HEADS-WARNING HEAD ON TAILGATE 1x LED HEADS-WARMOMG ON C PILAR, REAR FACING 1x INSTALL ONLY OF CUSTOMER SUPPLIED DECAL

PACKAGE

1x HEAVY DUTY .5 HR TIMER AND RELAY MODULE FOR

BATTERY PROTECTION

1x POWER PANEL, WIRE HARNESS, MISC HARDWARE &

SUPPLIES.

1x SECONDARY GUN LOCK SWITCH (separate release button for A-pillar)(unlocks both gunlocks)