A04_Statement_of_Work_rollcage_doors.pdf
PDF 129 KB Posted
- Attached to
- LE UTV REMOVE/ INSTALL ROLL CAGE Federal contract opportunity
- Solicitation number
- 140L3924Q0019
About this file
This document outlines requirements for a federal contract to upgrade a law enforcement utility terrain vehicle with a roll cage and doors. The contract will involve removing the factory roll cage and half doors from a 2024 Can Am X3 Max X3 RS Turbo 72-inch vehicle with the provided VIN. It will then install a Raceworks Can-Am Maverick X3 Max 4-seat roll cage with single stage powder coat and hard top, excluding intrusion bars, window nets and windshield. Additionally, a Raceworks Can-Am set of 4 full door skins and hardware will be installed. The vendor must provide manufacturer, model and itemized pricing for all new parts and obtain approval from the Bureau of Land Management before purchase and installation if any factory parts are found to be unusable. The related federal contract opportunity is solicitation number 140L3924Q0019 from the Department of the Interior Bureau of Land Management Nevada Region for the law enforcement UTV roll cage and door removal and installation work described.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| B03_Wage_Determination_Carson_City.pdf | ||
| Sol_140L3924Q0019.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work: Law enforcement UTV upgraded roll cage and doors
Date Submitted 01/19/2024
Vehicle: 2024 Can Am X3 Max X3 RS Turbo 72in Govt. Plate:
VIN:
Notes on equipment for installations:
All equipment needed for installation will consist of new parts unless noted as PROVIDED.
The BLM will be responsible for the cost of a new part above and beyond the initial quote if any part is found to be unusable at the time of installation. However, the vendor will be required to notify the BLM of any unusable part, suggested replacement part, and obtain approval before purchase and installation.
For all new parts needed to complete the installation, as noted below, the vendor must include manufacturer, model, and itemized price of equipment in the quote. All new parts must meet the below set standards or specific make or model as noted or be equivalent.
The BLM has to right to disqualify any part that is deemed not comparable or found to be unsatisfactory.
REMOVE FACTORY ROLL CAGE and DOORS
1. Remove factory roll cage.
2. Remove factory half doors.
INSTALLATION
Install Raceworks Can-Am Maverick X3 Max 4-seat Roll Cage Includes: single stage powder coat, hard top.
Excludes intrusion bars, window nets, windshield.
Install Raceworks Can-Am Set of 4 full doors skins and all hardware.
| REMOVE FACTORY ROLL CAGE and DOORS |
| INSTALLATION |
| Install Raceworks Can-Am Maverick X3 Max 4-seat Roll Cage |
| Includes: single stage powder coat, hard top. |
| Excludes intrusion bars, window nets, windshield. |
| Install Raceworks Can-Am Set of 4 full doors skins and all hardware. |
File details come from the government source that posted it. Updated .