B09_Amendment_1_Attachment_1_Revised_PWS_23_Mar_2023_0001.docx

PROJECT TITLE:

Placer West Fuels

Redding BLM, CA-NOD

Contents PWS 1.0 Background on the Government’s Requirement PWS 2.0 General Scope of Work PWS 3.0 Overall Objective(s) PWS 4.0 Specific Tasks PWS 5.0 Delivery / Performance Schedule PWS 6.0 Government-Furnished Property, Materials, Services.................9 PWS 7.0 Security and Administrative Matters PWS 8.0 Technical Exhibits and Definitions

EXHIBIT A: PERFORMANCE REQUIREMENTS SUMMARY (PRS)

EXHIBIT B: MAPS…………..……………………………….............14-18

Attachment 1 - Performance Work Statement (PWS)

PWS Page 10

PWS 1.0 Background on the Government’s Requirement

Bureau of Land Management Redding Field Office is requesting hand thinning, hand piling, and pile covering of hazard fuels within Redding Ca. in Shasta County around Mule town rd. north of Placer St. (road A16). Heavy accumulations of hazard fuels on public lands adjacent to recreation trails, roadways, and private lands have created elevated wildfire threat to infrastructure and resources. Established fuel breaks along trails, roadways, and adjacent to infrastructure will improve access for first responders, evacuation of the public, and create tactically viable control features for use in fire suppression or prescribed burning.

This scope of work defines the requirements for the contractor to provide forestry or hazard fuels personnel to cut, pile, prune, and pile cover vegetation within the project area.

PWS 2.0 General Scope of Work

Services include hand cutting with power saws, hand piling cut material, pruning of leave trees, and pile covering of live and dead standing or fallen vegetation on up to 133 acres of public land within Shasta County, CA. The Contractor shall accomplish all cutting, piling, pile covering, and leave tree pruning within the designated treatment area in accordance with the specification. The contractor shall avoid cutting within designated exclusion areas. The project area is divided into five independent subunits in which contractors will provide a total cost per acre and cost per sub-unit price.

Place of Performance

Project Location:

· Township 31N Range 6W Section 23, 24, 22, 15, &10.

· The services under this contract will be performed at Placer West Fuels project area which is in Shasta County, CA and contains approximately 133 acres of hand cutting, piling, and pile covering treatments on public lands administered by the Bureau of Land Management (BLM) Redding Field Office (see attached map). The project area is located approximately 5 miles South/ Southeast of Redding, CA.

Driving Directions to project Area:

From Redding head west on county road A16 (Placer St.) for 6 miles, turn right on Mule Town rd., continue on Mule Town rd. for approx. 1mi., meeting area will be at the Oak Knoll Parking area and trailhead.

Hours of Operations The Contractor will coordinate their hours of operation with BLM, but the Contractor is not restricted to operating during regular BLM office hours. Chainsaw work may not begin until 1/2hr after sunrise and must end 1/2hr after sunset on any given working day. Other hours of operation restrictions may be implemented during high fire danger or during previously scheduled events.

Security of Equipment and Property The Contractor may leave equipment at the work site with approval from the COR. The Contractor shall be responsible for equipment if it should be lost, stolen or damaged. At the close of each work period, government facilities, equipment, and materials shall be secured. All personnel employed by the Contractor in the performance of this contract, or any representative of the Contractor entering the government worksite, shall abide by all security regulations.

Period of Performance:

The period of performance shall be from November 1st,2023- March 15th,2024.

Project unit breakdown: Unit 1 - 39 acres (Secluded Valley rd.), Unit 2 - 10 acres, Unit 3 - 10 acres, Unit 4 - 11 acres, Unit 5 - 62 acres (Mule town rd.)

PWS 3.0 Overall Objective(s)

The objective of this work is to reduce wildfire threat by constructing hazard fuel breaks along roadways, and near infrastructure on public land administered by the Bureau of Land Management Redding Field Office.

· Fuel breaks will be constructed by hand severing, hand piling, leave tree pruning, and pile covering live or dead standing and dead downed vegetation.

· Fuels breaks will focus on breaking continuity of vertical and horizontal fuels stands to limit unchecked fire spread in overstocked stands.

· Pruning of Leave Trees will occur within the fuel break treatment area

Special considerations/ modifications will be given to cultural sites, wildlife habitat and riparian exclusion areas.

PWS 4.0 Specific Tasks

All tasks will occur through the entirety of the project area, approx. 133 acres total.

Task 1: Hand sever using power saws live and dead standing or fallen vegetation 200 feet from road edges, and BLM property boundary to create continuous linear fuel breaks – see attached treatment map.

· Hand cut live standing vegetation up to 8 inches DBH to create 30ft stem spacing between live stems/ leave trees Post Treatment.

· Live standing material greater than 8 inches DBH will not be cut within the treatment area but may be used to create 30-foot stem spacing profile post treatment.

· No live or dead limbs shall be left on the stumps after cutting. Stumps shall be cut level or perpendicular to the vertical angle of the stump and at a height not exceeding 6 inches from ground surface measured on the uphill side.

· All live conifers and hardwoods 8 inches DBH and larger are reserved from cutting or girdling.

· All living Blue Oak (Quercus douglasii) regardless of diameter will not be cut and may be used in creating post treatment 30-foot stem spacing profile.

· No riparian vegetation would be cut as part of the fuels reduction, regardless of diameter.

· Live standing upland vegetation up to 6 inches DBH will be cut within riparian buffer areas, however piles must be placed outside of riparian buffer areas.

· No fuels reduction cutting will occur in Archeological exclusion areas.

· Hand cut, limb and buck standing dead fuels up to 18 inches DBH and downed dead fuels up to 10 inches diameter, downed material greater than 10 inches diameter will be bucked to create maximum contact with ground surface and left on site. Un-piled logs and slash (greater than 10 inches) will be set back 10 feet from trails, infrastructure, or roadways.

· No dead standing vegetation less than 18 inches DBH will be left uncut, unless identified as a wildlife tree (marked with red and white candy stripe flagging). Dead standing vegetation will not be used in creating 30ft stem spacing post treatment profile.

· Downed material greater than 10 inches will be limbed and the limbs piled along with other material less than 10 inches.

· Dead standing vegetation less than 18 inches DBH and downed material less than 10 inches will be cut within riparian buffer areas, however piles must be placed outside of riparian buffer area.

No fuels reduction cutting will occur within Archeological exclusion areas. Cutting within the fifty-foot riparian area is acceptable but will be limited to cutting only non-riparian vegetation. All cutting within the fifty-foot riparian area shall be piled outside of fifty feet from stream bed center.

Task 2: Pruning of Leave Trees within the identified treatment area.

· Pruning of all leave trees and leave snags to a height of 8 feet above ground level.

· Live and dead limbs and branches shall be cut cleanly and as close to the bole of the tree as possible. Scarring of leave tree bark or tree bole should not occur

· Tree limbs and branches attached to the bole above the designated pruning height but have limbs or branches extending into the pruning height area, shall be pruned so they do not extend below the designated height (8ft.).

Task 3: Hand pile all cut material and downed slash within treatment area – see attached treatment map.

· Cut material and slash between 1/2 inch and 10 inches in diameter and greater than 2 feet in length will be utilized to construct burn piles. Burn pile dimensions shall range from a minimal footprint of 6 foot by 6 foot to a maximum footprint of 12 foot by 12 foot. Burn piles shall be constructed at a minimal height that is equal to the width the pile footprint.

· Slash less than 1/2 inch in diameter or less than 2 feet in length shall be left on the ground. Slash left on the ground shall not exceed 6 inches in depth.

· Burn piles will be compact, free of interior open spaces, free of dirt or other non-combustibles.

· Burn piles will be trimmed of any material that protrudes beyond 2 feet from the outermost compacted edge of the burn piles footprint.

· Burn piles will be placed a minimum of 6 feet from leave trees, trails, fence lines, roadways, and unit boundaries.

· Burn piles will be placed a minimum of 6 feet from powerline drip lines.

· Burn piles will not be built within riparian areas, cultural exclusions, or buffers.

· All roads and trails designated on the project map(s) shall be kept free of slash and piled material.

Task 4: Hand pile covering all created piles.

· All hand piles shall be covered with a minimum of 6-foot by 6-foot piece of 4-mil thickness black polyethylene plastic or forestry slash paper (Kraft paper). Hand piles shall be covered such that at least 80 percent of the pile’s surface area shall be covered. All four corners and the middle of the cover material shall be anchored with slash or other debris. The cover material must be placed in the top¼ of the pile.

· BLM will provide pile covering material at the onset of project operations. The contractor will request additional pile covering material from the COR as needed to cover piles at prescribed specification.

Criteria for Selection of Leave Trees:

All live conifers and hardwoods 8 inches DBH and larger are reserved from cutting or girdling. All living Blue Oak regardless of diameter will be retained. These trees shall be included in post treatment spacing requirements. Leave trees shall be prioritized based on species over tree characteristics.

· Order of leave species preference:

1. Blue Oak (Quercus douglasii)

2. Black Oak (Quercus velutina)

3. Gray Pine (Pinus sabiniana), Coffeeberry (Frangula californica)

4. Interior Live Oak (Quercus wislizeni), Knob Cone (Pinus attenuate), Toyon (Heteromeles arbutifolia).

Characteristics used in the selection of leave trees include the following:

· Has no apparent damage to the main bole;

· Is not visibly dead/dying;

· Demonstrates good vigor and is disease/bug free;

· Has at least 40 percent crown ratio or largest crown ratio if none greater than 40 percent are present

PWS 5.0 Delivery / Performance Schedule

Mapping Unit boundaries are not marked. A shapefile and PDF Map of the treatment area for GPS/ Avenza will be provided and contractor will be required to accurately work within boundary of unit. Trailheads, intersections, and trail spurs are identified with recreation signage.

Additional Information:

The Contractor is responsible for organizing and directing all the equipment and personnel needed to fully accomplish the work. The Contractor shall develop and submit a Treatment Plan and Schedule to accomplish the project objectives. The Treatment Plan and Schedule will be agreed upon by both parties and incorporated into the contract at the Pre-Work. The Contractor shall notify the BLM COR a minimum of 2 weeks prior to initiating work. All changes to the Treatment Plan and Schedule will be agreed to prior to the changes taking effect. The Treatment Plan and Schedule shall include as a minimum the following items:

1. Cutting Plan – Discussed in more detail at Pre-Work meeting

2. Safety Plan – To include traffic control, identification of hazards, and trail closures if applicable

3. Fire Prevention Plan – For prevention and control of fires, with detailed list of personnel and equipment

Statutory Compliance The Contractor agrees to conduct operations under this contract and other related business activities in compliance with federal, state, and local statutes, standards, orders, permits or other regulations. Failure to comply will be grounds for default in accordance with the Default clause. The contract shall govern if such laws conflict with or preclude performance of contractual requirements.

Improvements The Contractor shall comply with the rules and regulations governing the operation of premises which are occupied and shall perform the contract in a manner that will not interrupt or interfere with the conduct of BLM business.

Before any camp, quarry, borrow pit, storage or service area other than shown on drawings is opened or operated lands administered by the BLM, written permission shall be obtained through the BLM and COR. A camp is interpreted to include the campsite or trailer parking area of any employee working on the project for Contractor. Such permission, if granted, shall be without charge to Contractor. Contractor must remove and dispose of all said improvements when no longer needed.

Wildlife Resources The Contractor shall comply with seasonal restrictions administered by the Bureau of Land Management project design features. The project area contains suitable nesting habitat for a multitude of species protected under the Migratory Bird Treaty Act of 1918. The regional nesting season for raptors protected under the act with the potential to occur within the project area runs from January 1 through August 31; for non-raptors, nesting season in the region occurs from mid-February through August 15.

Project activities that involve tree removal, vegetation disturbance, or other activities likely to cause disturbance to nesting birds within either of these timeframes will require the following design features:

A. Pre-project surveys Project activities conducted during either nesting season will require surveys to determine the presence of active nests within or adjacent to project areas, no more than 7 days prior to commencing work. Surveys will be conducted by a qualified biologist and should begin as early as possible within the nesting season, when visibility due to lack of foliage is highest.

B. Implementation of Avoidance Measures Where nests are found, a buffer of 250 feet should be established around the nest and maintained until birds have fledged or breeding activities have ceased. If it is determined that a smaller buffer would be sufficient to prevent impacts to nesting birds, buffer size may be adjusted by a qualified biologist, in coordination with USFWS. The buffer would be monitored by a biological observer until project work has ceased, or the nest is no longer active. Any incidental take of a migratory bird will be reported to USFWS.

No treatments will be permitted from March 15 until September 1 of any given year of project implementation.

Sensitive resource areas will be flagged and identified on maps provided at the pre-work meeting. However, if this protection measure proves inadequate, if other such areas are discovered, or if new concerns are identified, the BLM may either cancel or unilaterally modify this contract to provide additional protection regardless of when such facts become known. Discovery of such areas by either party shall be promptly reported to the other party and operations will be suspended at that location until the significance or potential significance of the area is determined.

Any active raptor nest found will be reported to the Wildlife Biologist and project activities ceased within a 0.5-mile buffer until surveys indicate that project activities would not disturb nesting and/or breeding activities.

Sensitive Vegetation and Riparian Areas Identified perennial streams require a riparian buffer of 100 feet within the project area. Identified intermittent streams within the project area will require a buffer of 50 feet.

These riparian buffers will be identified on the project map. Fuels reduction activities with riparian buffers may occur with the following specifications:

· Live standing vegetation up to 6 inches will be cut to a post treatment stem spacing profile of 15 feet.

· Dead standing vegetation up to 18 inches will be cut, no dead standing material less than 18 inches will remain post treatment and will not be used in post treatment spacing profile.

· Downed dead material up to 10 inches will be cut. Downed material larger than 10 inches will be limbed and the limbs piled along with other material less than 6 inches diameter.

· No piles will be constructed within the riparian buffer areas.

· Stream channels are excluding from cutting and removal of vegetation.

Archeological Resource Protection No fuels reduction operations will occur within mapped or flagged Archeological exclusion areas. Archeological features are protected by federal law and are prohibited from excavation, disturbance, damage, or collecting. Should previously unidentified archeological resources be found or uncovered, the contractor must make immediate contact with COR and stop all fuels reduction operations in the immediate area of discovery.

Protection of Improvements The Contractor shall protect roads and other improvements (such as fences, roads, trails, telephone lines, and ditches) whether designated on the project area map or not.

Protection of Improvements Not Owned by the BLM The Contractor will notify all utility companies, or other parties affected, and plans for all necessary adjustments of the public utility fixtures, pipelines, and other appurtenances affected by Contractor’s operations.

When Contractor’s operations are adjacent to properties of railway, telegraph, telephone, or power companies, or other property, work shall not begin until all necessary arrangements to prevent damage have been made by the Contractor.

The Contractor will cooperate with all owners of above-mentioned property. In the event of interruption because of accidental breakage, the Contractor shall promptly notify the proper authority, and cooperate with that authority in the restoration of service.

Protection of Land Survey Monuments The Contractor shall protect all known survey monuments, witness corners, reference monuments and bearing trees against any damage during Contractor’s operations.

Safety The Contractor will follow all United States Department of Labor Occupational Safety and Health Standards that pertain to the operations set forth in this contract under Subpart R, Special Industries Standards 1910.266 Logging Operations Standards.

Sanitation and Servicing The Contractor shall take all reasonable precautions to prevent pollution of air, soil, and water by Contractor’s operations. If facilities for employees are established within the project area, they shall be operated in a sanitary manner. Contractor shall not service tractors, trucks or other equipment on BLM lands where servicing is likely to result in pollution to soil or water.

Contractor shall remove from BLM lands all refuse resulting from use, servicing, repair, or abandonment of equipment. If the contractor’s operations or servicing of equipment result in pollution to soil or water, Contractor shall conduct cleanup to restore the polluted site to the previous observed conditions, and approved by the COR.

PWS 6.0 Government-Furnished Property, Materials, Services

General:

The Contractor shall furnish all personnel, materials, equipment, supplies, facilities, transportation, tools, supervision, and other items and non-personal services necessary to perform the work tasks defined in this Performance Work Statement, except for those items specified as government furnished property and services.

Materials:

The Contractor shall furnish all materials necessary to meet the requirement of this contract except for those items specified as government-furnished property and services.

Equipment:

The Contractor shall furnish equipment necessary to meet the requirement of this contract except for those items specified as government-furnished property and services.

PWS 7.0 Security and Administrative Matters

Regular Work Hours:

Unless otherwise specified work hours under this task order shall be limited to the time between one-half hour before sunrise to one-half hour after sunset each day. Work may be done on Saturday, Sunday with notification to the COR, however work will not occur on Federal holidays unless authorized by the COR.

Federal Holidays:

The following Federal Legal Holidays are observed:

Fire Danger Season:

The Contractor shall take every reasonable precaution to prevent a wildland fire from occurring from his or her actions on this project. The Authorized Officer may, under certain conditions, require fire prevention and control measures in addition to those required by applicable state laws and regulations. This may include but will not be limited to changes in daily work schedules or full closure of operations due to extreme fire risk.

PWS 8.0 Technical Exhibits and Definitions

Standard Definitions:

Physical Condition The Physical appearance of Federal equipment or facilities that considers cracks, chips, dents, abrasions, rust, corrosion, general cleanliness, vibration, operating temperature, and discoloration and other items as identified by the COR..

Physical condition may be determined by visual as well as diagnostic means.

Contracting Officer (CO) The Secretary of the Interior or designated authorized representative who is the only agent capable of signing a federal award or obligating funds.

Contracting Officer’s Representative (COR) The Contracting Officer’s designated representative as indicated in a delegation of authority letter.

Quality Assurance (QA) Surveillance of Contractor performance to determine performance requirements are met.

Performance Requirements Summary (PRS) (see Technical Exhibit below) The PRS identifies the key performance indicators of the Contract that will be evaluated by the Government to assure Contract performance standards are met by the Contractor.

Quality Control Those actions taken by the Contractor to control the production of goods or services so that they meet the requirements of the performance work statement.

EXHIBIT A: PERFORMANCE REQUIREMENTS SUMMARY (PRS)

Task(s):

1: Hand Sever

2: Hand Pile All trees, brush, and downed material up to 8 inches in diameter must be hand severed using power saws in accordance with the specification listed under Section 4 of this task order.

All cut material and downed slash from 1/2 to 6 inches in diameter and greater than 2 feet in length must be piled in accordance with the specifications listed under section 4 of this task order.

The COR and/or Project Inspector (PI) will conduct government inspections. The Contractor (or designated representative) is encouraged to be present to observe inspections. Summary results will be made available on request. Government inspections will consist of:

a. Compliance Inspections Visual compliance inspections of work tasks will be made on a periodic basis across the project area. Such inspections are not final and do not constitute acceptance by the Government.

b. Final Inspections Final inspections for payment will be made on the completed project unit unless otherwise agreed upon in writing. Contractor shall request a final inspection.

Inspection requests shall be verbal and documented within the diary or in writing and pursuant to FAR 52.246-4, shall include results of Contractor’s quality inspections. Inspections will be completed within ten

(10) calendar days after the notice is received for each item. If a formal request for an item inspection is within the ten (10) working days since the previous request, the time will not start until the time for the previous inspection expires.

The Contractor will be responsible for ensuring his or her crew can identify leave trees and cut to desired spacing distances.

The contractor will be made aware of the deficiencies sand documented in the COR’s diary. Deficiencies will need to be corrected within 48 hours unless the BLM representative states otherwise.

Incentives/Disincentives

a. Contractor will be required to rework the area at no additional cost to the Government

b. Positive or negative performance rating at the end of the contract via CPARS website

Performance Work Statement (PWS)

PWS Page 12

3. Pile Covering

4. Pruining of Leave Trees

All piles created within the project area must be covered under the specification outlined within section 4 of this task order.

Pruning of all leave trees and leave snags to a height of 8 feet above ground level.

See above

THIS PAGE INTENTIONALLY LEFT BLANK

Exhibit B - Placer West Overview

Legend Historical Ditches Exclusion Areas Placer West Fuels BLM Lands (Redding FO)

Sources: Esri, HERE, Garmin, Intermap, increment P Corp., GEBCO, USGS, FAO, NPS, NRCAN, GeoBase, IGN, Kadaster NL, Ordnance Survey, Esri Japan, METI, Esri China (Hong Kong), (c) OpenStreetMap contributors, and the GIS User Community

133 acresÜ

0 1,000 2,000 3,000 4,000 Feet

Unit 1Crown Way

Avoidance AreaSecluded Valley Dr Co Rd A16 Gold Run Rd Placer Rd

Millie Dr Crown Way Secluded Valley Dr Equestrian Ln Prospect Dr Equestrian Dr

Historical Ditches Exclusion Areas Placer West Fuels BLM Lands (Redding FO)

Sources: Esri, HERE, Garmin, Intermap, increment P Corp., GEBCO, USGS, FAO, NPS, NRCAN, GeoBase, IGN, Kadaster NL, Ordnance Survey, Esri Japan, METI, Esri China (Hong Kong), (c) OpenStreetMap contributors, and the GIS User Community

39 AcresFiona Way Ü

0 500 1,000 1,500 2,000

Unit 2,3

Unit 3 10 acres

Unit 2 10 acres

Exclusion Areas

BLM Lands (Redding FO) 2,000 Feet 1,000 1,500

Historical Ditches

Sources: Esri, HERE, Garmin, Intermap, increment P Corp., GEBCO, USGS, FAO, NPS, NRCAN, GeoBase, IGN, Kadaster NL, Ordnance Survey, Esri Japan, METI, Esri China (Hong Kong), (c) OpenStreetMap contributors, and the GIS User Community

20 AcresÜ

Unit 4

BLM Lands (Redding FO) 2,000 Feet 1,000 1,500

Sources: Esri, HERE, Garmin, Intermap, increment P Corp., GEBCO, USGS, FAO, NPS, NRCAN, GeoBase, IGN, Kadaster NL, Ordnance Survey, Esri Japan, METI, Esri China (Hong Kong), (c) OpenStreetMap contributors, and the GIS User Community

11 acresÜ

Unit 5

BLM Lands (Redding FO) 1,000 1,500 2,000

Ü

Sources: Esri, HERE, Garmin, Intermap, increment P Corp., GEBCO, USGS, FAO, NPS, NRCAN, GeoBase, IGN, Kadaster NL, Ordnance Survey, Esri Japan, METI, Esri China (Hong Kong), (c) OpenStreetMap contributors, and the GIS User Community

62 acres image73.png image74.png image75.png image79.jpeg image80.png image81.png image82.png image83.png image84.png image85.png image86.png image87.png image88.png image89.png image90.png image1.png image2.png image3.png image4.png image5.png image6.png image7.png image8.png image9.png image10.png image11.png image12.png image13.png image14.png image15.png image16.png image17.png image18.png image19.png image20.png image21.png image22.png image19.jpeg image23.png image24.png image25.png image26.png image27.png image28.png image29.png image31.jpeg image32.png image33.png image34.png image35.png image36.png image37.png image38.png image30.jpeg image31.png image39.png image40.png image41.png image42.png image43.png image44.png image45.png image46.png image47.png image48.png image49.png image50.png image53.jpeg image54.png image55.png image56.png image57.png image58.png image59.png image60.png image61.png image62.png image63.png image64.png image65.png image66.png image51.jpeg image52.png image53.png image67.png image68.png image69.png image70.png image71.png image72.png