140G0322Q0069_Min_Tech_Specs.xls

XLS spreadsheet 44 KB Posted Mar 17, 2022

Attached to: NEW TRUCK MOUNTED DRILLING RIG
Solicitation number: 140G0322Q0069
Issued by: Department of the Interior US Geological Survey Office of Acquisitions and Grants

About this file

Written by GovTribe AI · Dec 28, 2023

This document contains technical specifications for a new truck mounted drilling rig being solicited by the Department of the Interior US Geological Survey Office of Acquisitions and Grants. The rig must be capable of drilling to 2,500 feet using 4.5 inch rods and a 9.875 inch bit, utilizing air hammer, mud rotary, reverse circulation, and 8 inch casing advancing systems. It must be highway legal and move at highway speeds of 60 miles per hour. Key requirements include a tophead drive with minimum 70,000 pound pullback and 30,000 pound pull down, a drawworks with minimum 30,000 pound single line capacity, a 600 foot per minute wireline winch, and an air system with minimum 350 psi/1050 scfm compressor. The successful offeror must also demonstrate widespread maintenance and repair facilities in the western United States, with a particular focus on the area around Las Vegas.

View the file

Other files

File	Type	Posted
FAR_52_204-24_and_26.pdf	PDF	Mar 17, 2022
140G0322Q0069_COMMERCIAL_CLAUSESv2.pdf	PDF	Mar 17, 2022
Sol_140G0322Q0069.pdf	PDF	Mar 17, 2022

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1

DRILL RIG MINUMUM SPECIFICATIONS AND POINT ASSIGNMENT
Item	rating	range		points
Tophead Drive Specs
Tophead drive
Pull back	70,000 lbs	min
	90,000 lbs		extra points above min of 70,000 lbs	extra
Pull down	30,000 lbs	min
Drill feed	20ft/min	min
Fast feed	150ft up or down	min
Tophead travel	min 27ft	min	allows 20' rod + diverter or other extensions
Rotary Head	retracting		moves tophead out of center of hole
Torque	8,000/5,500 (ftlbs)	min	2 speed & adjustable torque
Speed	105/145 (rpm)	min	2 speed
Floating spindle	sub
Drawworks
Drawworks
Main Hoist	single line 30,000 lbs	min	Or less for 50k and lower rigs.
	double line 60,000 lbs	min	same as above
	speed up/dn 150ft/min
Jib aux boom	3,500 lbs		rotates from side of rig over to center of hole.
Wireline winch	600ft/min (up/dn) 2000lbs pull		3k(ft) of 1/4" non rotating cable for wireline coring
Table, Tools, Derrick
Table	retractable, 20in opening		1 side retracts, other side rotates out
Table bushings	4.5", 4.75", 6", 8"		all fit 20" opening
Carousel offset	offset table		offset table to get 20" casing in
Holding wrench	4.5"		air operated, work with other size wrenchs
Breakout wrench	Hydraulic 3.5" to 4.75"	min	ram will operate chain type wrench also
Pipe Rack/slide	12 @4.5" rod	min	on helper's side &has helper friendly slide
Pipe carousel	holds 6 @4.5"		rotates and includes upper breakout wrench
Drill rod setup	4.5" x 20' 3.5"IF		box up pin down configuration
			can accommodate, RC, 94mm, and other rods
Derrick	35ft to handle 20' rod		exceeds max pullback capacity
	open area around mast		allows use of ODEX type drilling methods
Derrick/mast	90,000lbs capacity	min	or less based on pullback
Dust deflector	mounts under table		removable
Work platforms	steel or fiberglass mesh fold up		includes step, covers end to end
Lights	full coverage	min	lights mast, table, driller, deck area
Air System
Air compressor	350psi/1050cfm	min
	additional cfm above min		extra points above 1050 cfm	extra
	500psi / cfm		switchable from low to high pressure	extra	list extra cost
	adjustable pressure&volume	min	electrically controlled
piping	3" 1500psi	min
Injection pump	1000 psi	min	for down hole hammer foam injection
	35 gpm		adjustable flow rate
Lube injector	adjustable flow rate	min	DHH lubricator/oiler
Air manifold	1500 psi	min	for plumbing in aux compressor or booster
Mud System
Mud Pump	3x4 centrifugal 150gpm/300psi	min
Hydraulic Leveling Jacks
Leveling Jacks	2 front 48" extension	min	hydraulic and capacity beyond rig and max pull capacity together. Individually controlled.
	2 rear 36" extension	min
Power Source
Engine	vendor can offer one or both options. Would like to choose which after quotes are in.
drive	min 600hp if sole power		no deck engine
drive	min 380hp if rig has deck eng		with deck engine		list extra cost
deck	min 575hp
Tier 4 final	passes strictest emissions		any engine on rig will meet strictest emissions
MISC
Cooling	extra capacity cooling system
Truck
All emenities to make the ride comfortable and safe for the driver. Includes, air ride seats (driver&passenger), large motorized (L&R) side mirrrors. Power steering, brakes. Aux braking system (Jake, etc). Engine preheater & ether injection. High capacity cooling system. Large volume fuel tank (min 200gal). Heavy duty suspension and frame. Extra heavy duty brakes. Rear removable pintle style hitch and wiring for trailer lights (pull service truck). Minimum 2 large (~16sqft) tool boxes. Paint Pantone 348 (USGS Green) and white.
General/Overall Expected Use of Rig
Rig will be truck mounted and totally self contained. It will be capable of the following:
Drilling to 2,500' with 4.5" rod and 9.875" bit.
Drilling using air hammer, mud rotary, reverse circulation, and 8" diameter casing advancing systems.
Air hammer may be run separately or with under-reamer or surface casing driver systems.
Surface casing driver system can be mounted and dismounted easily.
Truck/Rig will be highway legal and move at highway speeds (60mph).
Warranty, Maintenance Facilities and Supplies
Maintenance and repair facilities should be widespread & convienent, particularly in the Western US. Radius from Las Vegas <300 miles. Certified technicians are required to do repairs on drill rig. Replacement parts should be stocked at manufacturers hub of choice. Three copies of full breakdown, maintenance and repair manual is required. Warranty for rig and components.

Sheet2

Sheet3

File details come from the government source that posted it. Updated Mar 17, 2022.