Request_for_Quote_40438989.pdf

PR 40438989

Solicitation 140G0319Q0098

Request for Quote

The U.S. Geological Survey (USGS) Research Drilling Program has a requirement to purchase high density liner systems for the Idaho National Laboratory (INL) Project Office (PO), located in Idaho Falls, ID. USGS requires the purchase of two 1600 ft high density liner systems (840-denier liner material or better). The liners will be installed inside of 5.5-in.

boreholes to allow collection of seismic measurements. The liners will require support to install the liner system and allow collection of measurements. The purpose for the equipment is to support USGS INLPO continued geologic characterization through examination of bedding fractures and groundwater systems.

This requirement is subject to availability of funds.

I am requesting a firm price/quote.

Requirements:

High Density Blank Liner Material

a. Liner should be made of 840 denier materials or better.

b. Two separate liners will be required for this work.

c. Liner material should be fitted for a 5.5-in borehole.

d. Liner length should meet requirements of borehole depth, approximately 1,500-1,600 ft.

e. Liner should be engineered hold fluid over large unsaturated zones, where depth to water could be 700 ft or better.

Engineering Services for Installation of Liner

a. Contracted firm must supply equipment for installation and removal of liner

b. Contracted firm should understand the geology and borehole conditions

c. Contracted firm will be responsible for travel to and from the job site

d. Contracted firm will be responsible for support staff needed for installation and removal of liner.

See attached Statement of Work for additional information regarding requirements.

Period of Performance: begin date of June 12, 2019. The installation and measurements will be conducted over a 10-day period and could be done during the weeks of June 12, 2019 to July 31, 2019. The exact dates will be scheduled with the contractor.

Please provide your quote by May 13, 2019.

Send quote via email. Only proposals submitted by email to cciccarelli@usgs.gov will be accepted.

This requirement is set aside for small business. The NAICS code is 541330 Engineering Services with a SBA size standard in millions of dollars - $15.0.

mailto:cciccarelli@usgs.gov

PR 40438989

Solicitation 140G0319Q0098

All offerors and quoters are required to be registered in the System for Award Management (https://sam.gov/SAM/) at the time an offer or quotation is submitted in order to comply with the annual representations and certifications requirements.

This requirement is subject to wage determination.

Evaluation Criteria

The Government intends to make award to the responsive offeror that provides the Best Value to the Government based on Lowest Price, Technical Acceptability. Contractor must demonstrate in your proposal you can provide the materials that meet specifications;

demonstrate you understand the geology and borehole conditions; and demonstrate you can install and remove the liner.

https://sam.gov/SAM/)