B08_ATCH_1_DRAWINGS.pdf
PDF 194 KB Posted
- Attached to
- Wire Weight Gage Counter IAW Drawings
- Solicitation number
- 140G0126Q0051
About this file
This is a Specification Control Drawing for a counter component used in hydrologic instrumentation facilities. The document is an altered item specification produced by the United States Department of the Interior, Geological Survey, Water Resources Division, with drawing number 0030029, revision B, at full scale.
The counter is specified as a Veeder Root Division of Specialties Product Technologies component (Part Number 0745844-006, special order) featuring lug case mounting, top-going shaft rotation, and one count per revolution method with four display figures. The drawing provides detailed dimensional specifications in both inches and millimeters, including reference measurements of 1.22 inches [31.0 mm] length, 0.230 inches [5.84 mm] width, and 1.063 inches [26.99 mm] height, along with tolerance standards and surface finish requirements. The document was originally drawn on 4/25/11 and revised on 8/24/20, with approvals from Nikki Denton (drafting), H.R. Myers (drafting check), and Gary Loman (design check and approval). The drawing explicitly notes that identification of the suggested source is not a guarantee of continued availability, and one unit is required.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140G0126Q0051.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTES:
1. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.
2. (.XXX)= DECIMAL EQUIVALENT.
3. IDENTIFICATION OF THE SUGGESTED SOURCE IS NOT
TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR
CONTINUED AVAILABILITY AS A SOURCE OF SUPPLY
FOR THE ITEMS DESCRIBED ON THE DRAWING.
4 SUGGESTED SOURCE OF SUPPLY:
VEEDER ROOT
DIVISION OF SPECIALTIES PRODUCT TECHNOLOGIES
2100 WEST BROAD STREET
ELIZABETH TOWN, NC 28337
P/N: 0745844-006 SPECIAL ORDER
MOUNTING - LUG CASE
SHAFT ROTATION - TOP GOING
METHOD OF COUNTING - ONE COUNT
PER REVOLUTION
NO. OF FIGURES - 4
63 [1.6] µm THIRD ANGLE PROJECTION
METRIC CONVERSION
DECIMAL [mm]
X.XX.XXX
.X X
X.X.XX
SURFACE FINISH:
ANGLES
1/16FRACTIONS
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES AND INCLUDE PLATING
DECIMAL TOLERANCE [mm] = 0.13
= 1.6 = 0.8 = 0.38
.XXX .005
.XX .015
.X .030
- DO NOT SCALE THIS DRAWING -
UNITED STATES DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY - WATER RESOURCES DIVISION
PARTS LIST
NOTESDESCRIPTION
NO. REQ'D
APPROVALS
REVISION-DESCRIPTIONLTR. DATE
DATE
SCALE
TITLE
MATERIAL
SIZE DWG. NO. REV.
ITEM SH. QTY.
NO. SIZE DRAWING/PART NO. REQD.
DRAFTING CHECK:
DRAWN BY:
DESIGN CHECK:
DESIGN APPROVAL:
B
1/2
NIKKI DENTON
H.R. MYERS
GARY LOMAN
GARY LOMAN
COUNTER
0030029FULL -
4/25/11 8/24/20 8/24/20 8/24/20
REVISED AND REDRAWN
4/25/11
REVISED AND REDRAWN
1.22 [31.0]
REF
.100 [2.54]
REF
.230 [5.84]
REF
.125 [3.18]Ø
REF
1.063 [26.99]
REF
.531 [13.49]
REF
2X #27 (.144) DRILL THRU
ALTERED ITEM
SPECIFICATION CONTROL DRAWING
File details come from the government source that posted it. Updated .