Attachment_A_Solicitation_140G0125Q0194.pdf

ATTACHMENT A

Solicitation No.

140G0125Q0194

Document Title

1GB & 3GB Circuits - USGS Moffett Field Office

INSTRUCTION TO VENDORS

A discounted Open- Market firm-fixed-priced quotation and technical quotation package for 1GB & 3GB Circuits -

USGS Moffett Field Office (per requirements below) shall be submitted by 4:00 PM ED, Tuesday, August 12th, 2025 to the Contract Specialist, Leah Williams via email at lwilliams@usgs.gov. The solicitation number shall be included in the subject of the email. Faxed or mailed quotations will not be accepted. Vendor shall supply the USGS with a thorough quotation package demonstrating how they meet all requirements within the evaluation criteria. Quotation package shall be thorough enough to allow the USGS to perform a proper evaluation.

The following additional information must be supplied along with your quotation. Failure to submit this information may deem your quotation non-responsive and your quotation may not be considered.

1) Vendor must submit a quotation package which will be reviewed by the Contract Specialist and USGS

Technical Liaison. The quotation package must reflect all of the requirements as indicated in the Request For

Quote (RFQ).

2) Breakdown of the total firm-fixed price

3) Federal Tax ID Number.

4) Business Size Classification.

5) Unique Entity ID (UEI) Number.

The award resulting from this Request for Quote (RFQ) will be based on lowest price technically acceptable (LPTA).

This is RFQ is set aside for small business concerns. Only quotes from small business concerns will be accepted.

All questions regarding this RFQ shall be sent to the Contract Specialist via email no later than 10:00 AM ED, Monday

August, 11th, 2025. Vendors are urged to select one (1) representative from their firm to present all questions. Phone calls and late questions will not be accepted.

(End of Instructions) mailto:lwilliams@usgs.gov

140G0125Q0194

U.S. Geological Survey (USGS)

1G & 3G Circuits - USGS Moffett Field Office

Statement of Work (SOW)

INTRODUCTION AND BACKGROUND

Provide a dedicated internet 1G and 3G circuit to the USGS Moffett Field office.

The Moffett Field office is requiring additional circuits to connect lab equipment, a public Wi-Fi DMZ and for testing

FortiGate routers. The circuits are also very critical to allow the site to have multiple circuit connections for failover and for redundancy as well. The Moffett Field office is also growing as the final stage of the Menlo to Moffett move is almost complete. The additional staff, servers and desktops have put a strain on the existing circuit. More circuits are needed in order to provide more bandwidth to the already heavily utilized VPNS circuit.

SCOPE

The objective of this task order is for the installation of two fiber optic services providing internet access for the USGS

Moffett Field office located at 254 De France Ave, Mountain View, CA 94043. The awardee shall provide dedicated internet access (DIA) services. This includes initial installation and obtaining of necessary permits, activation, circuit performance monitoring and reporting, and ongoing operational and maintenance responsibilities.

APPLICABLE DOCUMENTS

N/A

TECHNICAL REQUIREMENTS

Services to be installed at the USGS Moffett Field office located at 254 De France Ave, Mountain View, CA 94043.

Primary Contact TBD at time of award

First and Last Name:

Email:

Business Phone:

Mobile:

1. Details of service to be provided

a. 3000 Mbps (3 Gbps) symmetrical Ethernet dedicated internet access (DIA).

b. 1000 Mbps (1 Gbps) symmetrical Ethernet dedicated internet access (DIA). Preferably a different ISP then the ISP for the 3 Gbps circuit from above.

c. Fiber optic media.

d. Any IP product or system developed, acquired, or produced must interoperate with both IPv6 and IPv4 systems and products and have available contractor/vendor IPv6 technical support for development and implementation and fielded product management.

2. Delivery of circuit

a. Two Fiber optic lines delivered to Moffett Field N254 demarc.

b. All necessary hardware and software to provide and support the designed solutions.

c. Network Interface Device (NID) to provide a Gigabit Ethernet SFP for connecting to customer equipment.

140G0125Q0194

d. Provide two static IP addresses for connecting customer equipment and for testing.

3. Network Management

a. Service will permit transit of all IP protocols.

b. Service is not subject to any data or bandwidth thresholds and data transfer will not be restricted or throttled in any manner.

c. Service to provide customer 24 x 7 x 365 access to network operations center (NOC) support in response to outages and other troubleshooting services.

d. Provider to supply service level agreement (SLA) for data connectivity and network reliability specifying terms including but not limited to circuit availability, delivery, latency, and Mean Time to Repair

(MTTR).

DELIVERABLES

1. Account number, circuit identifier, and all other information necessary for account management and support.

2. Circuit test results verifying circuits are functioning at full capacity and without errors.

3. Network Operations Center (NOC) support contact information and escalation procedures for problem resolution.

4. Authorized service level agreement (SLA).

Period of Performance

Date of award through one (1) year.

(End of Statement of Work)

140G0125Q0194

INFORMATION TECHNOLOGY SECURITY REQUIREMENTS SUMMARY

1. Background Investigation

N/A

2. Non-disclosure Agreement

N/A

3. Training

The Contractor shall perform in accordance with clause “Security Requirements: Facility Access and Information Technology” – Contractor employees must successfully complete DOI’s end-user computer security awareness training prior to being granted access to DOI data or being issued a user account. Training must be renewed annually. Additionally, the contract employees must sign a Statement of Responsibility (SOR) that states they have read the appropriate Rules of Behavior and other applicable Information security policies.

4. Personnel Changes

N/A

5. Contractor Location

N/A

6. Applicable Standards

N/A

7. Security Categorization

N/A

8. Property Rights

N/A

9. Independent Verification and Validation (IV & V)

N/A

10. Certification & Accreditation

N/A

11. Internet Logon Banner

N/A

12. Incident Reporting

140G0125Q0194

13. Quality Control

COTS Hardware or Software. All software or hardware purchased must be free of malicious code such as viruses, Trojan horse programs, worms, spyware, etc. Validation of this must be written into the contract.

14. Self Assessment

N/A

15. Vulnerability Analysis

N/A

16. Logon Banner

N/A

17. Security Controls

N/A

18. Contingency Plan

(End of Information Technology Security Requirements Summary)

Accessibility Requirements Tool

ICT Accessibility Requirements Statement per Section 508 of the Rehabilitation Act

1G DIA MOF

Solicitation Development

1G DIA MOF

E206 Hardware

E206.1 General. Where components of ICT are hardware and transmit information or have a user interface, such components shall conform to the requirements in Chapter 4.

E208 Support Documentation and Services

E208.1 General Where an agency provides support documentation or services for ICT, such documentation and services shall conform to the requirements in Chapter 6.

E302 Functional Performance Criteria

302.1 Without Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that does not require user vision.

302.2 With Limited Vision. Where a visual mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited vision.

140G0125Q0194

302.3 Without Perception of Color. Where a visual mode of operation is provided, ICT shall provide at least one visual mode of operation that does not require user perception of color.

302.4 Without Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that does not require user hearing.

302.5 With Limited Hearing. Where an audible mode of operation is provided, ICT shall provide at least one mode of operation that enables users to make use of limited hearing.

302.6 Without Speech. Where speech is used for input, control, or operation, ICT shall provide at least one mode of operation that does not require user speech.

302.7 With Limited Manipulation. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that does not require fine motor control or simultaneous manual operations.

302.8 With Limited Reach and Strength. Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength.

302.9 With Limited Language, Cognitive, and Learning Abilities. ICT shall provide features making its use by individuals with limited cognitive, language, and learning abilities simpler and easier.

602 Support Documentation

602.1 General. Documentation that supports the use of ICT shall conform to 602.

603 Support Services

603.1 General. ICT support services including, but not limited to, help desks, call centers, training services, and automated self-service technical support, shall conform to 603.

Instructions to Offerors

1 Provide an Accessibility Conformance Report (ACR) for each commercially available Information and

Communication Technology (ICT) item offered through this contract. Create the ACR using the

Voluntary Product Accessibility Template Version 2.1 or later, located at https://www.itic.org/policy/accessibility/vpat. Complete each ACR in accordance with the instructions provided in the VPAT template. Each ACR must address the applicable Section 508 requirements referenced in the Work Statement. Each ACR shall state exactly how the ICT meets the applicable standards in the remarks/explanations column, or through additional narrative. All "Not Applicable"

(N/A) responses must be explained in the remarks/explanations column or through additional narrative.

Address each standard individually and with specificity, and clarify whether conformance is achieved throughout the entire ICT Item (for example - user functionality, administrator functionality, and https://www.itic.org/policy/accessibility/vpat

140G0125Q0194 reporting), or only in limited areas of the ICT Item. Provide a description of the evaluation methods used to support Section 508 conformance claims. The agency reserves the right, prior to making an award decision, to perform testing on some or all of the Offeror’s proposed ICT items to validate Section 508 conformance claims made in the ACR.

2 Describe your approach to incorporating universal design principles to ensure ICT products or services are designed to support disabled users.

3 Describe plans for features that do not fully conform to the Section 508 Standards.

4 Describe "typical" user scenarios and tasks, including individuals with disabilities, to ensure fair and accurate accessibility testing of the ICT product or service being offered.

Acceptance Criteria

1 Prior to acceptance, the government reserves the right to perform testing on required ICT items to validate the offeror’s Section 508 conformance claims. If the government determines that Section 508 conformance claims provided by the offeror represent an inaccurate level of conformance than what is actually delivered to the agency, the government shall, at its option, require the offeror to remediate the delivered item to align with the required Section 508 conformance claims prior to acceptance.

(End of Section 508)

DOI Baseline Compliance Contract Guidelines

•Information systems and system services provided to the DOI by the Contractor must comply with DOI IT Cybersecurity and Privacy Control Standards, privacy policies, and other related guidance.

• Contractors and information system service providers shall be responsible for recognizing and reporting security incidents.

• Contractors shall comply with the requirements of the Privacy Act of 1974 and shall not remove personally identifiable information (PII) or Privacy Act material from government facilities or systems, or facilities or systems operated or maintained on the government’s behalf, without the express written permission of the Head of the Contracting Activity.

• Products, platforms, and services delivered as part of a contract statement of work that use information and communication technology (ICT), shall conform to the ICT Accessibility Revised 508 Standards of the Rehabilitation

Act.

• Contractors shall comply with all applicable records management laws and regulations that includes National Archives and Records Administration (NARA) records guidance and departmental policy.

• Acquired services shall comply with the Homeland Security Presidential Directive-12 that requires all federal entities to ensure that all Contractor employees have current and approved security background investigations that are equivalent to investigations performed with the federal employee workforce.

140G0125Q0194

• Contractors must manage Controlled Unclassified Information (CUI) in accordance with applicable laws, regulations, executive orders, and policies.

• If a portion of the contract requirement seeks information from ten or more members of the public, the Contactor employees shall work with the Bureau Information Collection Clearance Officer to obtain a Paperwork Reduction Act clearance from the Office of Management and Budget (OMB).

References

• Federal Information Security Modernization Act of 2014 (FISMA): https://www.cisa.gov/federal-information-security-modernization-act

• Federal Risk and Authorization Management Program (FedRAMP) for cloud hosted systems:

https://www.fedramp.gov

• Section 208 of the E-Government Act of 2002: https://www.govinfo.gov/content/pkg/PLAW-

107publ347/pdf/PLAW-107publ347.pd

• Privacy Act of 1974: https://www.justice.gov/opcl/privacy-act-1974

• Federal Information Processing Standards (FIPS) and the National Institute of 3 Standards and Technology

(NIST) 800-Series Special Publications (SP): https://www.nist.gov

• Office of Management and Budget (OMB) Circular A-130, Managing Information as a Strategic Resource:

https://www.cio.gov/policies-and-priorities/circular-a-130/

• NIST Computer Security Resource Center Glossary Terms and Definitions: https://csrc.nist.gov/glossary

(End of Guideline)

INTERNET PROTOCOL version 6 JUNE 2012

(a) Any system hardware, software, firmware and/or networked component (voice, video or data) developed, procured, or acquired in support and/or performance of this contract shall be capable of transmitting, receiving, processing, forwarding and storing digital information across system boundaries utilizing system packets that are formatted in accordance with commercial standards of Internet Protocol (IP) version 6 (IPv6) as set forth in the

USGv6 Profile (NIST Special Publication 500-267) and corresponding declarations of conformance defined in the USGv6

Test Program. In addition, this system shall maintain interoperability with IPv4 systems and provide at least the same level of performance and reliability capabilities of IPv4 products.

(b) Specifically, any new IP product or system developed, acquired, or produced must:

(1) Interoperate with both lPv6 and IPv4 systems and products, and

(2) Have available contractor/vendor IPv6 technical support for development and implementation and fielded product management.

(c) As IPv6 evolves, the Contractor commits to upgrading or providing an appropriate migration path for each item developed, delivered or utilized at no additional cost to ·the Government. The Contractor shall retrofit all non-

IPv6 capable equipment, as defined above, that is fielded under this contract with IPv6 capable equipment, at no additional cost to the Government.

(d) The contractor shall provide technical support for both IPv4 and IPv6.

(e) Any system or software must be able to operate on networks supporting IPv4, IPv6 or one that supports both.

(f) Any product whose non-compliance is discovered and made known to the Contractor within one year after acceptance shall be upgraded, modified or replaced to bring it into compliance at no additional cost to the

Government.

https://www.cisa.gov/federal-information-security-modernization-act https://www.cisa.gov/federal-information-security-modernization-act https://www.fedramp.gov/ https://www.govinfo.gov/content/pkg/PLAW-107publ347/pdf/PLAW-107publ347.pd https://www.govinfo.gov/content/pkg/PLAW-107publ347/pdf/PLAW-107publ347.pd https://www.justice.gov/opcl/privacy-act-1974 https://www.nist.gov/ https://www.cio.gov/policies-and-priorities/circular-a-130/ https://csrc.nist.gov/glossary

140G0125Q0194

(End of clause)

GS0199 PREVENTION OF MALICIOUS CODE JUNE 2018

(a) Definitions

Malicious code is a computer code developed for the purpose of causing some form of intentional damage to computer systems or networks. Malicious code may be a complete program or code imbedded in software programs that appear to provide useful functions. The term includes computer viruses and other destructive programs, such as "Trojan Horses" and network "worms."

(b) The contractor must have in place an anti-virus procedure to ensure that media supplied is uncontaminated by malicious code.

(c) The contractor is required to scan all delivered software to insure it is free of malicious code prior to its installation or operation on USGS-owned computers or contractor-owned computers connected to USGS computer systems or networks.

Contractors using diagnostics software disks or connecting to a non-USGS computer while performing repairs or upgrades to a USGS computer will scan the serviced computer's drive(s) to insure they are free of malicious code upon completion of the service call, or prior to return of serviced equipment, if servicing is performed off-site.

(End of Clause)

52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services NOV 2023

(a)Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights-

(1)Within a reasonable time after the defect was discovered or should have been discovered; and

(2)Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b)Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c)Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d)Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e)Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

https://www.acquisition.gov/far/52.233-1#FAR_52_233_1 https://www.acquisition.gov/far/52.202-1#FAR_52_202_1

140G0125Q0194

(f)Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting

Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g)Invoice.

(1)The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include-

(i)Name and address of the Contractor;

(ii)Invoice date and number;

(iii)Contract number, line item number and, if applicable, the order number;

(iv)Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v)Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi)Terms of any discount for prompt payment offered;

(vii)Name and address of official to whom payment is to be sent;

(viii)Name, title, and phone number of person to notify in event of defective invoice; and

(ix)Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x)Electronic funds transfer (EFT) banking information.

(A)The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B)If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award

Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures.

(C)EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2)Invoices will be handled in accordance with the Prompt Payment Act ( 31 U.S.C. 3903) and Office of

Management and Budget (OMB) prompt payment regulations at 5 CFR Part 1315.

(h)Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against https://www.acquisition.gov/far/52.232-33#FAR_52_232_33 https://www.acquisition.gov/far/52.232-34#FAR_52_232_34 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim

140G0125Q0194 liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United

States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i)Payment.-

(1)Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2)Prompt payment. The Government will make payment in accordance with the Prompt Payment Act ( 31 U.S.C.

3903) and prompt payment regulations at 5 CFR Part 1315.

(3)Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4)Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5)Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall-

(i)Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the-

(A)Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B)Affected contract number and delivery order number, if applicable;

(C)Affected line item or subline item, if applicable; and

(D)Contractor point of contact.

(ii)Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6)Interest.

(i)All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii)The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii)Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if– http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim https://www.acquisition.gov/far/52.212-5#FAR_52_212_5 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section7109&num=0&edition=prelim https://www.acquisition.gov/far/33.211#FAR_33_211

140G0125Q0194

(A)The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B)The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C)The Contractor requests a deferment of collection on a debt previously demanded by the Contracting

Officer (see 32.607-2).

(iv)If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v)Amounts shall be due at the earliest of the following dates:

(A)The date fixed under this contract.

(B)The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi)The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A)The date on which the designated office receives payment from the Contractor;

(B)The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C)The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii)The interest charge made under this clause may be reduced under the procedures prescribed in

FAR 32.608-2 in effect on the date of this contract.

(j)Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1)Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2)Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b.

destination.

(k)Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l)Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

https://www.acquisition.gov/far/32.607-2#FAR_32_607_2 https://www.acquisition.gov/far/32.608-2#FAR_32_608_2

140G0125Q0194

(m)Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the

Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n)Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the

Government upon acceptance, regardless of when or where the Government takes physical possession.

(o)Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p)Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the

Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q)Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r)Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C.

1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s)Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1)The schedule of supplies/services.

(2)The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to

Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3)The clause at 52.212-5.

(4)Addenda to this solicitation or contract, including any license agreements for computer software.

(5)Solicitation provisions if this is a solicitation.

(6)Other paragraphs of this clause.

(7)The Standard Form 1449.

(8)Other documents, exhibits, and attachments.

(9)The specification.

(t)[Reserved]

(u)Unauthorized Obligations.

http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section1352&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section1352&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title18-section431&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title40-chapter37&saved=%7CZ3JhbnVsZWlkOlVTQy1wcmVsaW0tdGl0bGU0MC1jaGFwdGVyMzctZnJvbnQ%3D%7C%7C%7C0%7Cfalse%7Cprelim&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title41-chapter87&saved=%7CZ3JhbnVsZWlkOlVTQy1wcmVsaW0tdGl0bGU0MC1jaGFwdGVyMzctZnJvbnQ%3D%7C%7C%7C0%7Cfalse%7Cprelim&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title49-section40118&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid%3AUSC-prelim-title41-chapter21&saved=%7CZ3JhbnVsZWlkOlVTQy1wcmVsaW0tdGl0bGU0MC1jaGFwdGVyMzctZnJvbnQ%3D%7C%7C%7C0%7Cfalse%7Cprelim&edition=prelim https://www.acquisition.gov/far/52.212-5#FAR_52_212_5 https://www.gsa.gov/forms-library/solicitationcontractorder-commercial-items

140G0125Q0194

(1)Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation ( 31 U.S.C. 1341), the following shall govern:

(i)Any such clause is unenforceable against the Government.

(ii)Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an "I agree" click box or other comparable mechanism (e.g., "click-wrap" or "browse-wrap" agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii)Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2)Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(v)Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

Alternate I (NOV 2021). When a time-and-materials or labor-hour contract is contemplated, substitute the following paragraphs (a), (e), (i), (l), and (m) for those in the basic clause.

(a) Inspection/Acceptance. (1) The Government has the right to inspect and test all materials furnished and services performed under this contract, to the extent practicable at all places and times, including the period of performance, and in any event before acceptance. The Government may also inspect the plant or plants of the Contractor or any subcontractor engaged in contract performance. The Government will perform inspections and tests in a manner that will not unduly delay the work.

(2) If the Government performs inspection or tests on the premises of the Contractor or a subcontractor, the

Contractor shall furnish and shall require subcontractors to furnish all reasonable facilities and assistance for the safe and convenient performance of these duties.

(3) Unless otherwise specified in the contract, the Government will accept or reject services and materials at the place of delivery as promptly as practicable after delivery, and they will be presumed accepted 60 days after the date of delivery, unless accepted earlier.

(4) At any time during contract performance, but not later than 6 months (or such other time as may be specified in the contract) after acceptance of the services or materials last delivered under this contract, the Government may require the Contractor to replace or correct services or materials that at time of delivery failed to meet contract requirements. Except as otherwise specified in paragraph (a)(6) of this clause, the cost of replacement or correction shall be determined under paragraph (i) of this clause, but the "hourly rate" for labor hours incurred in the replacement or correction shall be reduced to exclude that portion of the rate attributable to profit. Unless otherwise specified below, the portion of the "hourly rate" attributable to profit shall be 10 percent. The Contractor shall not tender for acceptance materials and services required to be replaced or corrected without disclosing the former requirement for replacement or correction, and, when required, shall disclose the corrective action taken. [Insert portion of labor rate attributable to profit.]

(5)(i) If the Contractor fails to proceed with reasonable promptness to perform required replacement or correction, http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section1341&num=0&edition=prelim

140G0125Q0194 and if the replacement or correction can be performed within the ceiling price (or the ceiling price as increased by the

Government), the Government may-

(A) By contract or otherwise, perform the replacement or correction, charge to the Contractor any increased cost, or deduct such increased cost from any amounts paid or due under this contract; or

(B) Terminate this contract for cause.

(ii) Failure to agree to the amount of increased cost to be charged to the Contractor shall be a dispute under the Disputes clause of the contract.

(6) Notwithstanding paragraphs (a)(4) and (5) above, the Government may at any time require the Contractor to remedy by correction or replacement, without cost to the Government, any failure by the Contractor to comply with the requirements of this contract, if the failure is due to-

(i) Fraud, lack of good faith, or willful misconduct on the part of the Contractor's managerial personnel; or

(ii) The conduct of one or more of the Contractor’s employees selected or retained by the Contractor after any of the Contractor’s managerial personnel has reasonable grounds to believe that the employee is habitually careless or unqualified.

(7) This clause applies in the same manner and to the same extent to corrected or replacement materials or services as to materials and services originally delivered under this contract.

(8) The Contractor has no obligation or liability under this contract to correct or replace materials and services that at time of delivery do not meet contract requirements, except as provided in this clause or as may be otherwise specified in the contract.

(9) Unless otherwise specified in the contract, the Contractor's obligation to correct or replace Government-furnished property shall be governed by the clause pertaining to Government property.

(e) Definitions. (1) The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. As used in this clause-

(i) "Direct materials" means those materials that enter directly into the end product, or that are used or consumed directly in connection with the furnishing of the end product or service.

(ii) "Hourly rate" means the rate(s) prescribed in the contract for payment for labor that meets the labor category qualifications of a labor category specified in the contract that are-

(A) Performed by the contractor;

(B) Performed by the subcontractors; or

(C) Transferred between divisions, subsidiaries, or affiliates of the contractor under a common control.

(iii) "Materials" means-

(A) Direct materials, including supplies transferred between divisions, subsidiaries, or affiliates of the contractor under a common control;

(B) Subcontracts for supplies and incidental services for which there is not a labor category specified in https://www.acquisition.gov/far/52.202-1#FAR_52_202_1

140G0125Q0194 the contract;

(C) Other direct costs (e.g., incidental services for which there is not a labor category specified in the contract, travel, computer usage charges, etc.);

(D) The following subcontracts for services which are specifically excluded from the hourly rate: [Insert any subcontracts for services to be excluded from the hourly rates prescribed in the schedule.]; and

(E) Indirect costs specifically provided for in this clause.

(iv) "Subcontract" means any contract, as defined in FAR subpart 2.1, entered into with a subcontractor to furnish supplies or services for performance of the prime contract or a subcontract including transfers between divisions, subsidiaries, or affiliates of a contractor or subcontractor. It includes, but is not limited to, purchase orders, and changes and modifications to purchase orders.

(i) Payments. (1) Work performed. The Government will pay the Contractor as follows upon the submission of commercial invoices approved by the Contracting Officer:

(i) Hourly rate.

(A) The amounts shall be computed by multiplying the appropriate hourly rates prescribed in the contract by the number of direct labor hours performed. Fractional parts of an hour shall be payable on a prorated basis.

(B) The rates shall be paid for all labor performed on the contract that meets the labor qualifications specified in the contract. Labor hours incurred to perform tasks for which labor qualifications were specified in the contract will not be paid to the extent the work is performed by individuals that do not meet the qualifications specified in the contract, unless specifically authorized by the Contracting Officer.

(C) Invoices may be submitted once each month (or at more frequent intervals, if approved by the

Contracting Officer) to the Contracting Officer or the authorized representative.

(D) When requested by the Contracting Officer or the authorized representative, the Contractor shall substantiate invoices (including any subcontractor hours reimbursed at the hourly rate in the schedule) by evidence of actual payment, individual daily job timecards, records that verify the employees meet the qualifications for the labor categories specified in the contract, or other substantiation specified in the contract.

(E) Unless the Schedule prescribes otherwise, the hourly rates in the Schedule shall not be varied by virtue of the Contractor having performed work on an overtime basis.

(1) If no overtime rates are provided in the Schedule and the Contracting Officer approves overtime work in advance, overtime rates shall be negotiated.

(2) Failure to agree upon these overtime rates shall be treated as a dispute under the Disputes clause of this contract.

(3) If the Schedule provides rates for overtime, the premium portion of those rates will be reimbursable only to the extent the overtime is approved by the Contracting Officer.

(ii) Materials.

(A) If the Contractor furnishes materials that meet the definition of a commercial product at FAR 2.101, the price to be paid for such materials shall not exceed the Contractor’s established catalog or market price, adjusted to reflect the-https://www.acquisition.gov/far/subpart-2.1#FAR_Subpart_2_1 https://www.acquisition.gov/far/2.101#FAR_2_101

140G0125Q0194

(1) Quantities being acquired; and

(2) Any modifications necessary because of contract requirements.

(B) Except as provided for in paragraph (i)(1)(ii)(A) and (D)(2) of this clause, the Government will reimburse the Contractor the actual cost of materials (less any rebates, refunds, or discounts received by the contractor that are identifiable to the contract) provided the Contractor-

(1) Has made payments for materials in accordance with the terms and conditions of the agreement or invoice; or

(2) Makes these payments within 30 days of the submission of the Contractor’s payment request to the

Government and such payment is in accordance with the terms and conditions of the agreement or invoice.

(C) To the extent able, the Contractor shall-

(1) Obtain materials at the most advantageous prices available with due regard to securing prompt delivery of satisfactory materials; and

(2) Give credit to the Government for cash and trade discounts, rebates, scrap, commissions, and other amounts that are identifiable to the contract.

(D) Other Costs. Unless listed below, other direct and indirect costs will not be reimbursed.

(1) Other Direct Costs. The Government will reimburse the Contractor on the basis of actual cost for the following, provided such costs comply with the requirements in paragraph (i)(1)(ii)(B) of this clause:[Insert each element of other direct costs (e.g., travel, computer usage charges, etc. Insert "None" if no reimbursement for other direct costs will be provided. If this is an indefinite delivery contract, the Contracting Officer may insert "Each order must list separately the elements of other direct charge(s) for that order or, if no reimbursement for other direct costs will be provided, insert ‘None’."]

(2) Indirect Costs (Material Handling, Subcontract Administration, etc.). The Government will reimburse the Contractor for indirect costs on a pro-rata basis over the period of contract performance at the following fixed price:[Insert a fixed amount for the indirect costs and payment schedule. Insert "$0" if no fixed price reimbursement for indirect costs will be provided. (If this is an indefinite delivery contract, the Contracting Officer may insert "Each order must list separately the fixed amount for the indirect costs and payment schedule or, if no reimbursement for indirect costs, insert ‘None’)."]

(2) Total cost. It is estimated that the total cost to the Government for the performance of this contract shall not exceed the ceiling price set forth in the Schedule and the Contractor agrees to use its best efforts to perform the work specified in the Schedule and all obligations under this contract within such ceiling price. If at any time the Contractor has reason to believe that the hourly rate payments and material costs that will accrue in performing this contract in the next succeeding 30 days, if added to all other payments and costs previously accrued, will exceed 85 percent of the ceiling price in the Schedule, the Contractor shall notify the Contracting Officer giving a revised estimate of the total price to the

Government for performing this contract with supporting reasons and documentation. If at any time during the performance of this contract, the Contractor has reason to believe that the total price to the Government for performing this contract will be substantially greater or less than the then stated ceiling price, the Contractor shall so notify the

Contracting Officer, giving a revised estimate of the total price for performing this contract, with supporting reasons and documentation. If at any time during performance of this contract, the Government has reason to believe that the work to be required in performing this contract will be substantially greater or less than the stated ceiling price, the Contracting

Officer will so advise the Contractor, giving the then revised estimate of the total amount of effort to be required under the contract.

140G0125Q0194

(3) Ceiling price. The Government will not be obligated to pay the Contractor any amount in excess of the ceiling price in the Schedule, and the Contractor shall not be obligated to continue performance if to do so would exceed the ceiling price set forth in the Schedule, unless and until the Contracting Officer notifies the Contractor in writing that the ceiling price has been increased and specifies in the notice a revised ceiling that shall constitute the ceiling price for performance under this contract. When and to the extent that the ceiling price set forth in the Schedule has been increased, any hours expended and material costs incurred by the Contractor in excess of the ceiling price before the increase shall be allowable to the same extent as if the hours expended and material costs had been incurred after the increase in the ceiling price.

(4) Access to records. At any time before final payment under this contract, the Contracting Officer (or authorized representative) will have access to the following (access shall be limited to the listing below unless otherwise agreed to by the Contractor and the Contracting Officer):

(i) Records that verify that the employees whose time has been included in any invoice meet the qualifications for the labor categories specified in the contract;

(ii) For labor hours (including any subcontractor hours reimbursed at the hourly rate in the schedule), when timecards are required as substantiation for payment-

(A) The original timecards (paper-based or electronic);

(B) The Contractor’s timekeeping procedures;

(C) Contractor records that show the distribution of labor between jobs or contracts; and

(D) Employees whose time has been included in any invoice for the purpose of verifying that these employees have worked the hours shown on the invoices.

(iii) For material and subcontract costs that are reimbursed on the basis of actual cost-

(A) Any invoices or subcontract agreements substantiating material costs; and

(B) Any documents supporting payment of those invoices.

(5) Overpayments/Underpayments. Each payment previously made shall be subject to reduction to the extent of amounts, on preceding invoices, that are found by the Contracting Officer not to have been properly payable and shall also be subject to reduction for overpayments or to increase for underpayments. The Contractor shall promptly pay any such reduction within 30 days unless the parties agree otherwise. The Government within 30 days will pay any such increases, unless the parties agree otherwise. The Contractor’s payment will be made by check. If the Contractor becomes aware of a duplicate invoice payment or that the Government has otherwise overpaid on an invoice payment, the Contractor shall-

(i) Remit the overpayment amount to the payment office cited…